Subject: [fedora-puppet] Branch 'testing' - 79 commits - configs/dns configs/system configs/web manifests/nodes manifests/servergroups manifests/services modules/apache modules/awstats

From: Mike McGrath <[email-masked]>
Date: Mon, 21 Jul 2008 19:53:30 +0000 (UTC)

configs/dns/master/fedoraproject.org                                   |    3 
 configs/system/check_koji                                              |    4 
 configs/system/fedora-updates-push                                     |    2 
 configs/system/fedorapeople/set-quotas-for-all.cron                    |    5 
 configs/system/nagios-external/contactgroups/fedora-sysadmin-pager.cfg |    2 
 configs/system/nagios-external/contacts/ricky.cfg                      |   24 
 configs/system/nagios-external/services/websites.cfg                   |    9 
 configs/system/nagios/checkcommands.cfg                                |    8 
 configs/system/nagios/contactgroups/fedora-sysadmin-pager.cfg          |    4 
 configs/system/nagios/contacts/ricky.cfg                               |   50 
 configs/system/nagios/hostgroups/servers.cfg                           |    2 
 configs/system/nagios/hostgroups/web.cfg                               |    2 
 configs/system/nagios/hosts/proxy1-www.cfg                             |    3 
 configs/system/nagios/hosts/proxy1.cfg                                 |    1 
 configs/system/nagios/hosts/proxy4-www.cfg                             |    8 
 configs/system/nagios/hosts/proxy4.cfg                                 |    7 
 configs/system/nagios/services/disk.cfg                                |    2 
 configs/system/nagios/services/pgsql.cfg                               |    7 
 configs/system/pager.py                                                |   73 
 configs/system/planet/planet-cron                                      |    1 
 configs/system/selinux/restorecond.conf                                |    1 
 configs/web/admin.fedoraproject.org/modRewrite.conf                    |    2 
 configs/web/admin.fedoraproject.org/pager.conf                         |    2 
 configs/web/applications/accounts.conf.erb                             |    2 
 configs/web/applications/bodhi-masher.cfg.erb                          |   74 
 configs/web/applications/bodhi-prod.cfg.erb                            |   37 
 configs/web/applications/bodhi.conf.erb                                |   16 
 configs/web/applications/bodhi.wsgi                                    |   29 
 configs/web/applications/pager.conf                                    |    1 
 configs/web/httpd.conf                                                 |    2 
 configs/web/httpd.conf-rhel5p                                          |    2 
 manifests/nodes/log1.fedora.phx.redhat.com.pp                          |    3 
 manifests/nodes/noc1.fedora.phx.redhat.com.pp                          |    1 
 manifests/nodes/noc2.fedoraproject.org.pp                              |    1 
 manifests/nodes/proxy1.fedora.phx.redhat.com.pp                        |    2 
 manifests/nodes/publictest10.fedora.phx.redhat.com.pp                  |    1 
 manifests/nodes/publictest12.fedoraproject.org.pp                      |   17 
 manifests/nodes/releng2.fedora.phx.redhat.com.pp                       |    1 
 manifests/servergroups/appRelEng.pp                                    |    2 
 manifests/services/TurboGears.pp                                       |    2 
 manifests/services/bodhi.pp                                            |   50 
 manifests/services/db.pp                                               |    2 
 manifests/services/pager.pp                                            |   13 
 modules/apache/manifests/init.pp                                       |    6 
 modules/awstats/README                                                 |   14 
 modules/awstats/files/awstats.cron                                     |   36 
 modules/awstats/files/awstats.docs.fedoraproject.org.conf              | 1499 ++++++++++
 modules/awstats/files/awstats.download.fedoraproject.org.conf          | 1499 ++++++++++
 modules/awstats/files/awstats.fedorahosted.org.conf                    | 1499 ++++++++++
 modules/awstats/files/awstats.fedoraproject.org.conf                   | 1499 ++++++++++
 modules/awstats/files/awstats.koji.fedoraproject.org.conf              | 1499 ++++++++++
 modules/awstats/files/awstats.mirrors.fedoraproject.org.conf           | 1499 ++++++++++
 modules/awstats/files/awstats.model.conf                               | 1499 ++++++++++
 modules/awstats/files/awstats.translate.fedoraproject.org.conf         | 1499 ++++++++++
 modules/awstats/manifests/init.pp                                      |   53 
 55 files changed, 12441 insertions(+), 140 deletions(-)

New commits:
commit 309d1162112e03844b0a710f6ded7379879bc74c
Merge: 787171b... f73de92...
Author: Mike McGrath <[email-masked]>
Date:   Mon Jul 21 19:53:25 2008 +0000

    Merge branch 'master' into testing

commit f73de927d71d6ba210293cd983e0656d5b5925f8
Author: Seth Vidal <[email-masked]>
Date:   Mon Jul 21 18:48:22 2008 +0000

    make it reap the old cache files

diff --git a/configs/system/planet/planet-cron b/configs/system/planet/planet-cron
index 2af7dc3..ecb9c04 100644
--- a/configs/system/planet/planet-cron
+++ b/configs/system/planet/planet-cron
@@ -1,4 +1,5 @@
 */20 * * * * planet-user /usr/local/bin/pull-run-planet-config.sh http://fedorapeople.org/people_planet.ini >>/dev/null 2>&1
 34 6,8,10,12,14,16,18,20,22 * * * root /srv/planet/config/info/yum-rss/makerss
 */20 * * * * planet-user /srv/planet/config/run-planet info >>/dev/null 2>&1
+10 4 * * * *  planet-user /usr/sbin/tmpwatch 360 /srv/planet/config/people/cache >>/dev/null

commit 5d59af88ea0238f7a9b8c701499f770c3cfb5181
Author: Frank J. Chiulli <[email-masked]>
Date:   Mon Jul 21 00:24:31 2008 +0000

    Temporarily disable puppet control of iptables on pt12 for testing.

diff --git a/manifests/nodes/publictest12.fedoraproject.org.pp b/manifests/nodes/publictest12.fedoraproject.org.pp
index 46499cf..3234132 100644
--- a/manifests/nodes/publictest12.fedoraproject.org.pp
+++ b/manifests/nodes/publictest12.fedoraproject.org.pp
@@ -7,14 +7,17 @@ node publictest12{
     $udpPorts = [ ]
     $custom = [ ]
 
-    iptables { '/etc/sysconfig/iptables':
-            content => template('system/iptables-template.conf.erb'),
-    }
+#
+# Disable iptables while testing nrpe (pt12) with nagios (pt10).
+#
+#    iptables { '/etc/sysconfig/iptables':
+#            content => template('system/iptables-template.conf.erb'),
+#    }
 
-    service { iptables:
-        ensure => running,
-        hasstatus => true,
-    }
+#    service { iptables:
+#        ensure => running,
+#        hasstatus => true,
+#    }
 
 }

commit 71eb6d76f7e55eda6dffbdba9d017c80332a7590
Merge: f8fc738... 803258f...
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 22:33:36 2008 +0000

    Merge branch 'master' of /git/puppet

commit f8fc7385b2417a440c1019255d0d7eacec27a313
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 22:33:35 2008 +0000

    [bodhi] Run our WSGI app as the apache user

diff --git a/configs/web/applications/bodhi.conf.erb b/configs/web/applications/bodhi.conf.erb
index 58737f8..9f612b8 100644
--- a/configs/web/applications/bodhi.conf.erb
+++ b/configs/web/applications/bodhi.conf.erb
@@ -1,7 +1,7 @@
 Alias /static /usr/share/bodhi/static
 Alias /updates/static /usr/share/bodhi/static
 
-WSGIDaemonProcess bodhi user=bodhi threads=1 processes=1
+WSGIDaemonProcess bodhi user=apache threads=1 processes=1
 WSGIProcessGroup bodhi
 WSGISocketPrefix /tmp/wsgi
 WSGIRestrictStdout On

commit 803258fff277fcd6c32fbe9aea3035169940cba5
Merge: 86f84c4... c1a8e13...
Author: Ricky Zhou <[email-masked]>
Date:   Sun Jul 20 22:26:09 2008 +0000

    Merge branch 'master' of /git/puppet

commit 86f84c4ff042c7032be2f41b7bdbea6f439726f0
Author: Ricky Zhou <[email-masked]>
Date:   Sun Jul 20 22:26:05 2008 +0000

    Fix /srv/tg perms.

diff --git a/manifests/services/TurboGears.pp b/manifests/services/TurboGears.pp
index 657eefa..d491365 100644
--- a/manifests/services/TurboGears.pp
+++ b/manifests/services/TurboGears.pp
@@ -18,7 +18,7 @@ class turbogears {
         folder { "/srv/tg/":
         owner => 48,
                 group => 48,
-                mode => '0770',
+                mode => '0755',
                 source => "blank/"
         }
     package { python-fedora:

commit c1a8e131ae605e910516e7dc979335b7a2ce6b6e
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 21:57:40 2008 +0000

    [bodhi] Fix the bodhi-masher's configuration template

diff --git a/manifests/services/bodhi.pp b/manifests/services/bodhi.pp
index cc8920c..e2c9aef 100644
--- a/manifests/services/bodhi.pp
+++ b/manifests/services/bodhi.pp
@@ -40,12 +40,7 @@ class bodhi-server inherits turbogears {
 
 class bodhi-masher inherits bodhi-server {
 
-    templatefile { '/etc/bodhi.cfg':
+    Templatefile['/etc/bodhi.cfg'] {
 	content => template('web/applications/bodhi-masher.cfg.erb'),
-        owner => 'apache',
-	group => 'apache',
-        notify => Service['httpd'],
-        require => Package['httpd'],
-        mode => '640'
     }
 }

commit f3ecbe5c05e0eae4776b7a10244779c101766581
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 21:53:05 2008 +0000

    [bodhi] Remove a duplicate apachetemplate definition

diff --git a/manifests/services/bodhi.pp b/manifests/services/bodhi.pp
index eb3dba1..cc8920c 100644
--- a/manifests/services/bodhi.pp
+++ b/manifests/services/bodhi.pp
@@ -48,9 +48,4 @@ class bodhi-masher inherits bodhi-server {
         require => Package['httpd'],
         mode => '640'
     }
-
-    apachetemplate { '/etc/httpd/conf.d/bodhi.conf':
-        content => template('web/applications/bodhi.conf.erb'),
-        require => Package['mod_wsgi']
-    }
 }

commit c1058122ce611d7f9c9e08e6e4e32b2423965005
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 21:31:16 2008 +0000

    [bodhi] We no longer need /srv/tg/bodhi

diff --git a/manifests/services/bodhi.pp b/manifests/services/bodhi.pp
index edb1055..eb3dba1 100644
--- a/manifests/services/bodhi.pp
+++ b/manifests/services/bodhi.pp
@@ -22,12 +22,6 @@ class bodhi-server inherits turbogears {
         ensure => present
     }
 
-    application { '/srv/tg/bodhi/':
-        source => 'bodhi/',
-        require => [ Folder['/srv/tg/'],
-                Package['python-fedora'] ]
-    }
-
     templatefile { '/etc/bodhi.cfg':
                 content => template('web/applications/bodhi-prod.cfg.erb'),
                 notify => Service['supervisord'],
@@ -46,12 +40,6 @@ class bodhi-server inherits turbogears {
 
 class bodhi-masher inherits bodhi-server {
 
-    application { '/srv/tg/bodhi/':
-        source => 'bodhi/',
-        require => [ Folder['/srv/tg/'],
-                Package['python-fedora'] ]
-    }
-
     templatefile { '/etc/bodhi.cfg':
 	content => template('web/applications/bodhi-masher.cfg.erb'),
         owner => 'apache',

commit 17240dbc499f5dedb721cc0fde21c3970b4f5d36
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 21:25:15 2008 +0000

    Add the bodhi-server to publictest10

diff --git a/manifests/nodes/publictest10.fedora.phx.redhat.com.pp b/manifests/nodes/publictest10.fedora.phx.redhat.com.pp
index 695b5f0..85b9396 100644
--- a/manifests/nodes/publictest10.fedora.phx.redhat.com.pp
+++ b/manifests/nodes/publictest10.fedora.phx.redhat.com.pp
@@ -3,6 +3,7 @@ node publictest10{
     include ssh::sshd
     include httpd
     include fas
+    include bodhi-server
 #    include global
 }

commit c8da416ff1dd546dca86f84a489141de95f21f19
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 21:12:01 2008 +0000

    [bodhi] Remove the bodhi user, and just use apache instead

diff --git a/manifests/services/bodhi.pp b/manifests/services/bodhi.pp
index 2464ee4..edb1055 100644
--- a/manifests/services/bodhi.pp
+++ b/manifests/services/bodhi.pp
@@ -22,16 +22,6 @@ class bodhi-server inherits turbogears {
         ensure => present
     }
 
-    user { bodhi:
-        uid => 440,
-        gid => 48,
-        shell => '/bin/bash',
-        home => '/home/bodhi',
-        comment => 'bodhi user',
-        ensure => present,
-    }
-
-
     application { '/srv/tg/bodhi/':
         source => 'bodhi/',
         require => [ Folder['/srv/tg/'],
@@ -41,7 +31,7 @@ class bodhi-server inherits turbogears {
     templatefile { '/etc/bodhi.cfg':
                 content => template('web/applications/bodhi-prod.cfg.erb'),
                 notify => Service['supervisord'],
-        owner => 'bodhi',
+        owner => 'apache',
 	group => 'apache',
         notify => Service['httpd'],
         require => Package['httpd'],
@@ -56,15 +46,6 @@ class bodhi-server inherits turbogears {
 
 class bodhi-masher inherits bodhi-server {
 
-    user { bodhi:
-        uid => 440,
-        gid => 48,
-        shell => '/bin/bash',
-        home => '/home/bodhi',
-        comment => 'bodhi user',
-        ensure => present,
-    }
-
     application { '/srv/tg/bodhi/':
         source => 'bodhi/',
         require => [ Folder['/srv/tg/'],
@@ -73,7 +54,7 @@ class bodhi-masher inherits bodhi-server {
 
     templatefile { '/etc/bodhi.cfg':
 	content => template('web/applications/bodhi-masher.cfg.erb'),
-        owner => 'bodhi',
+        owner => 'apache',
 	group => 'apache',
         notify => Service['httpd'],
         require => Package['httpd'],

commit 16989f2b4654fc9051dfd5b91665c1b5ff0f9acb
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 17:32:26 2008 +0000

    [bodhi] Include httpd and mod_wsgi in the bodhi-server

diff --git a/manifests/services/bodhi.pp b/manifests/services/bodhi.pp
index fda9c6e..2464ee4 100644
--- a/manifests/services/bodhi.pp
+++ b/manifests/services/bodhi.pp
@@ -15,6 +15,9 @@ class bodhi-proxy inherits httpd {
 
 class bodhi-server inherits turbogears {
     include supervisor
+    include httpd
+    include mod_wsgi-package
+
     package { bodhi-server:
         ensure => present
     }

commit 06ba88061224b5e2e6d48a9fb8d86a8d96027af2
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 16:23:02 2008 +0000

    [bodhi] Fix the inclusion of the bodhi-server package

diff --git a/manifests/services/bodhi.pp b/manifests/services/bodhi.pp
index b7278d6..fda9c6e 100644
--- a/manifests/services/bodhi.pp
+++ b/manifests/services/bodhi.pp
@@ -15,7 +15,9 @@ class bodhi-proxy inherits httpd {
 
 class bodhi-server inherits turbogears {
     include supervisor
-    include bodhi-server-package
+    package { bodhi-server:
+        ensure => present
+    }
 
     user { bodhi:
         uid => 440,

commit 098d8ef01d43504d135d30d4cb7558cae3879e59
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 16:11:19 2008 +0000

    [bodhi] Remove a bunch of package deps that will get sucked in with the bodhi-server RPM

diff --git a/manifests/services/bodhi.pp b/manifests/services/bodhi.pp
index a16e68a..b7278d6 100644
--- a/manifests/services/bodhi.pp
+++ b/manifests/services/bodhi.pp
@@ -15,10 +15,7 @@ class bodhi-proxy inherits httpd {
 
 class bodhi-server inherits turbogears {
     include supervisor
-    include python-TurboMail-package
-    include koji-package
-    include python-tgcaptcha-package
-    include python-turboflot-package
+    include bodhi-server-package
 
     user { bodhi:
         uid => 440,
@@ -53,11 +50,6 @@ class bodhi-server inherits turbogears {
 }
 
 class bodhi-masher inherits bodhi-server {
-    include createrepo-package
-    include yum-utils-package
-    include mash-package
-    include intltool-package
-    include cvs-package
 
     user { bodhi:
         uid => 440,

commit b03bd811b1d001ff7e253421a38c50a1edb561cf
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 04:50:17 2008 +0000

    Clean up the bodhi classes

diff --git a/manifests/services/bodhi.pp b/manifests/services/bodhi.pp
index 1f0b033..a16e68a 100644
--- a/manifests/services/bodhi.pp
+++ b/manifests/services/bodhi.pp
@@ -17,7 +17,6 @@ class bodhi-server inherits turbogears {
     include supervisor
     include python-TurboMail-package
     include koji-package
-    include koji-utils-package
     include python-tgcaptcha-package
     include python-turboflot-package
 
@@ -53,17 +52,12 @@ class bodhi-server inherits turbogears {
     }
 }
 
-class bodhi-masher inherits turbogears {
-    include supervisor
-    include python-TurboMail-package
+class bodhi-masher inherits bodhi-server {
     include createrepo-package
     include yum-utils-package
-    include koji-package
-    include koji-utils-package
     include mash-package
     include intltool-package
     include cvs-package
-    include ipython-package
 
     user { bodhi:
         uid => 440,

commit 4723464979dc752214885832e96412c6bfba7a2d
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 04:49:47 2008 +0000

    Update bodhi's TurboGears configuration for our new mod_wsgi setup

diff --git a/manifests/services/bodhi.pp b/manifests/services/bodhi.pp
index 35e5752..1f0b033 100644
--- a/manifests/services/bodhi.pp
+++ b/manifests/services/bodhi.pp
@@ -37,10 +37,13 @@ class bodhi-server inherits turbogears {
                 Package['python-fedora'] ]
     }
 
-    templatefile { '/srv/bodhi/prod.cfg':
+    templatefile { '/etc/bodhi.cfg':
                 content => template('web/applications/bodhi-prod.cfg.erb'),
                 notify => Service['supervisord'],
-        owner => 48,
+        owner => 'bodhi',
+	group => 'apache',
+        notify => Service['httpd'],
+        require => Package['httpd'],
         mode => '640'
     }
 
@@ -71,17 +74,18 @@ class bodhi-masher inherits turbogears {
         ensure => present,
     }
 
-
     application { '/srv/tg/bodhi/':
         source => 'bodhi/',
         require => [ Folder['/srv/tg/'],
                 Package['python-fedora'] ]
     }
 
-    templatefile { '/srv/bodhi/prod.cfg':
-                content => template('web/applications/bodhi-masher.cfg.erb'),
-                notify => Service['supervisord'],
-        owner => 48,
+    templatefile { '/etc/bodhi.cfg':
+	content => template('web/applications/bodhi-masher.cfg.erb'),
+        owner => 'bodhi',
+	group => 'apache',
+        notify => Service['httpd'],
+        require => Package['httpd'],
         mode => '640'
     }

commit ed7398e35355b18afd11859f44898585c572f05d
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 04:49:03 2008 +0000

    Add a bodhi apache mod_wsgi configuration

diff --git a/configs/web/applications/bodhi.conf.erb b/configs/web/applications/bodhi.conf.erb
new file mode 100644
index 0000000..58737f8
--- /dev/null
+++ b/configs/web/applications/bodhi.conf.erb
@@ -0,0 +1,16 @@
+Alias /static /usr/share/bodhi/static
+Alias /updates/static /usr/share/bodhi/static
+
+WSGIDaemonProcess bodhi user=bodhi threads=1 processes=1
+WSGIProcessGroup bodhi
+WSGISocketPrefix /tmp/wsgi
+WSGIRestrictStdout On
+WSGIRestrictSignal Off
+WSGIPythonOptimize 2
+
+WSGIScriptAlias /updates /usr/share/bodhi/bodhi.wsgi
+
+<Directory /usr/lib/python2.4/site-packages/bodhi/>
+    Order deny,allow
+    Allow from all
+</Directory>
diff --git a/manifests/services/bodhi.pp b/manifests/services/bodhi.pp
index ca8419d..35e5752 100644
--- a/manifests/services/bodhi.pp
+++ b/manifests/services/bodhi.pp
@@ -42,7 +42,12 @@ class bodhi-server inherits turbogears {
                 notify => Service['supervisord'],
         owner => 48,
         mode => '640'
-	}
+    }
+
+    apachetemplate { '/etc/httpd/conf.d/bodhi.conf':
+        content => template('web/applications/bodhi.conf.erb'),
+        require => Package['mod_wsgi']
+    }
 }
 
 class bodhi-masher inherits turbogears {
@@ -79,4 +84,9 @@ class bodhi-masher inherits turbogears {
         owner => 48,
         mode => '640'
     }
+
+    apachetemplate { '/etc/httpd/conf.d/bodhi.conf':
+        content => template('web/applications/bodhi.conf.erb'),
+        require => Package['mod_wsgi']
+    }
 }

commit 9f132e128eadc4a722ca2f3a1542f7ff6de83141
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 04:09:32 2008 +0000

    Include the bodhi-masher class in appRelEng

diff --git a/manifests/servergroups/appRelEng.pp b/manifests/servergroups/appRelEng.pp
index 2e8254a..4d60949 100644
--- a/manifests/servergroups/appRelEng.pp
+++ b/manifests/servergroups/appRelEng.pp
@@ -11,7 +11,7 @@ class appRelEng {
     include epelRepoclosure
     include git-package
     include fedora-packager-package
-#    include bodhi-server
+    include bodhi-masher
 
     # Firewall Rules, allow web, smolt, Plone, mirrormanager, noc and bodhi traffic through	    
     $tcpPorts = [ 80, 111, 161, 443, 8084, 873, 2049, 4001, '48620:48623', 892 ]

commit f41c7f7398117f1b14de5cf6838daa3b866d6730
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 04:09:07 2008 +0000

    Create a new bodhi-masher class that is in charge of doing the hard work.

diff --git a/manifests/services/bodhi.pp b/manifests/services/bodhi.pp
index 9445af4..ca8419d 100644
--- a/manifests/services/bodhi.pp
+++ b/manifests/services/bodhi.pp
@@ -16,14 +16,44 @@ class bodhi-proxy inherits httpd {
 class bodhi-server inherits turbogears {
     include supervisor
     include python-TurboMail-package
+    include koji-package
+    include koji-utils-package
+    include python-tgcaptcha-package
+    include python-turboflot-package
+
+    user { bodhi:
+        uid => 440,
+        gid => 48,
+        shell => '/bin/bash',
+        home => '/home/bodhi',
+        comment => 'bodhi user',
+        ensure => present,
+    }
+
+
+    application { '/srv/tg/bodhi/':
+        source => 'bodhi/',
+        require => [ Folder['/srv/tg/'],
+                Package['python-fedora'] ]
+    }
+
+    templatefile { '/srv/bodhi/prod.cfg':
+                content => template('web/applications/bodhi-prod.cfg.erb'),
+                notify => Service['supervisord'],
+        owner => 48,
+        mode => '640'
+	}
+}
+
+class bodhi-masher inherits turbogears {
+    include supervisor
+    include python-TurboMail-package
     include createrepo-package
     include yum-utils-package
     include koji-package
     include koji-utils-package
     include mash-package
     include intltool-package
-    include python-tgcaptcha-package
-    include python-turboflot-package
     include cvs-package
     include ipython-package
 
@@ -44,9 +74,9 @@ class bodhi-server inherits turbogears {
     }
 
     templatefile { '/srv/bodhi/prod.cfg':
-                content => template('web/applications/bodhi-prod.cfg.erb'),
+                content => template('web/applications/bodhi-masher.cfg.erb'),
                 notify => Service['supervisord'],
         owner => 48,
         mode => '640'
-        }
+    }
 }

commit 41bb4d6f6e8137a55c25cb665a3731ef89c62d42
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 04:08:23 2008 +0000

    Do not include the bodhi-server in the releng2 manifest.
    We do in appRelEng instead.

diff --git a/manifests/nodes/releng2.fedora.phx.redhat.com.pp b/manifests/nodes/releng2.fedora.phx.redhat.com.pp
index 344e880..d45c3ce 100644
--- a/manifests/nodes/releng2.fedora.phx.redhat.com.pp
+++ b/manifests/nodes/releng2.fedora.phx.redhat.com.pp
@@ -2,5 +2,4 @@ node releng2{
     include phx
     include appRelEng
     include kojiownersync
-    include bodhi-server
 }

commit b1ac8e438a104940a801b435ac6ea7dcd9c1f881
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 04:07:30 2008 +0000

    Some bodhi-masher config modifications

diff --git a/configs/web/applications/bodhi-masher.cfg.erb b/configs/web/applications/bodhi-masher.cfg.erb
new file mode 100644
index 0000000..11590d1
--- /dev/null
+++ b/configs/web/applications/bodhi-masher.cfg.erb
@@ -0,0 +1,74 @@
+[global]
+
+##
+## Bodhi Production Configuration
+##
+## $Id: bodhi-prod.cfg.erb,v 1.8 2008/05/21 23:38:07 lmacken Exp $
+##
+
+sqlobject.dburi="notrans_postgres://bodhi:<%= bodhiPassword %>@db2/bodhi"
+
+server.socket_port=8084
+server.environment="production"
+server.webpath="/updates"
+server.log_file = "server.log"
+server.log_to_screen = False
+server.thread_pool = 50
+server.socket_queue_size = 30
+
+# We probably want to have apache do this for us...
+gzipFilter.on = True
+
+session_filter.on = False
+base_url_filter.on = True
+base_url_filter.use_x_forwarded_host = True
+base_url_filter.base_url = 'https://admin.fedoraproject.org/updates'
+
+tg.strict_parameters = True
+
+# FAS2
+sqlalchemy.dburi="sqlite:///"
+fas.url = 'https://admin.fedoraproject.org/accounts/'
+identity.provider='jsonfas'
+identity.saprovider.model.visit="fedora.accounts.tgfas.VisitIdentity"
+visit.manager="jsonfas"
+visit.saprovider.model="fedora.accounts.tgfas.Visit"
+visit.cookie.secure = True
+
+# Our identity that we use to fetch bugzilla details and such
+bodhi_password='<%= bodhiPassword %>'
+bodhi_email = [email-masked]'
+
+mail.on = True
+mail.server = 'bastion.fedora.phx.redhat.com'
+notice_sender = [email-masked]'
+security_team = [email-masked]'
+release_team_address = [email-masked]'
+fedora_announce_list = [email-masked]'
+fedora_test_announce_list = [email-masked]'
+
+build_dir = '/mnt/koji/packages'
+mashed_dir = '/mnt/koji/mash/updates'
+
+base_address = 'http://admin.fedoraproject.org'
+bz_server = 'https://bzprx.vip.phx.redhat.com/xmlrpc.cgi'
+pkgdb_url = 'https://10.8.32.121/pkgdb'
+buildsystem = 'koji'
+
+[logging]
+
+[[loggers]]
+[[[bodhi]]]
+level='DEBUG'
+qualname='bodhi'
+handlers=['debug_out']
+
+[[[access]]]
+level='INFO'
+qualname='turbogears.access'
+handlers=['debug_out']
+
+[[[turbomail]]]
+level='INFO'
+qualname='turbomail'
+handlers=['debug_out']

commit 6f6e0ca27848ad4612f7c3cbac6c0db8708cc3b6
Author: Luke Macken <[email-masked]>
Date:   Sun Jul 20 04:04:59 2008 +0000

    bodhi-prod.cfg.erb logging modifications

diff --git a/configs/web/applications/bodhi-prod.cfg.erb b/configs/web/applications/bodhi-prod.cfg.erb
index b75d4b0..eb82817 100644
--- a/configs/web/applications/bodhi-prod.cfg.erb
+++ b/configs/web/applications/bodhi-prod.cfg.erb
@@ -53,31 +53,19 @@ buildsystem = 'koji'
 pkgdb_url = 'https://10.8.32.121/pkgdb'
 
 [logging]
-[[handlers]]
-
-[[[error_out]]]
-args="('server.log', 'D', 7)"
-class='TimedRotatingFileHandler'
-level='DEBUG'
-formatter='full_content'
 
 [[loggers]]
 [[[bodhi]]]
 level='DEBUG'
 qualname='bodhi'
-handlers=['error_out']
+handlers=['debug_out']
 
 [[[access]]]
 level='INFO'
 qualname='turbogears.access'
-handlers=['error_out']
-
-[[[cp_access]]]
-level='INFO'
-qualname='cherrypy.msg'
-handlers=['error_out']
+handlers=['debug_out']
 
 [[[turbomail]]]
 level='INFO'
 qualname='turbomail'
-handlers=['error_out']
+handlers=['debug_out']

commit 166378c7fbd95743c5af13a468535db73c4f7cfb
Author: Ricky Zhou <[email-masked]>
Date:   Sun Jul 20 01:45:42 2008 +0000

    Remove all traces of the nrpe thing.

diff --git a/configs/system/nagios/services/pgsql.cfg b/configs/system/nagios/services/pgsql.cfg
index ce732c4..797c31e 100644
--- a/configs/system/nagios/services/pgsql.cfg
+++ b/configs/system/nagios/services/pgsql.cfg
@@ -8,7 +8,7 @@ define service {
 define service {
   host_name		db2
   service_description   Check Koji DB Connections
-  check_command         check_by_nrpe!check_postgres_conns!50!60!koji
+  check_command         check_postgres_conns!50!60!koji
   use                   defaulttemplate
 }

commit fbb98f881cae83b7a38f3af5258c70d8aad133b6
Author: Ricky Zhou <[email-masked]>
Date:   Sun Jul 20 01:41:24 2008 +0000

    Don't know what I was thinking...  use SSH for this one.

diff --git a/configs/system/nagios/checkcommands.cfg b/configs/system/nagios/checkcommands.cfg
index 7b90acd..2a8146f 100644
--- a/configs/system/nagios/checkcommands.cfg
+++ b/configs/system/nagios/checkcommands.cfg
@@ -241,6 +241,6 @@ define command{
 # 'check_postgres_conns' command definition
 define command{
         command_name    check_postgres_conns
-        command_line    $USER1$/check_nrpe -t 20 -H $HOSTADDRESS$ -c "$USER1$/check_procs -u postgres -w $ARG1$ -c $ARG2$ -a $ARG3$"
+        command_line    $USER1$/check_by_ssh -t 30 -H $HOSTADDRESS$ "$USER1$/check_procs -u postgres -w $ARG1$ -c $ARG2$ -a $ARG3$"
         }

commit acb2b1cf67245d7077b8c20ac2bc3c67068b837c
Author: Ricky Zhou <[email-masked]>
Date:   Sun Jul 20 01:36:14 2008 +0000

    Use nrpe for this one.

diff --git a/configs/system/nagios/checkcommands.cfg b/configs/system/nagios/checkcommands.cfg
index 64ba003..7b90acd 100644
--- a/configs/system/nagios/checkcommands.cfg
+++ b/configs/system/nagios/checkcommands.cfg
@@ -241,6 +241,6 @@ define command{
 # 'check_postgres_conns' command definition
 define command{
         command_name    check_postgres_conns
-        command_line    $USER1$/check_procs -u postgres -w $ARG1$ -c $ARG2$ -a $ARG3$
+        command_line    $USER1$/check_nrpe -t 20 -H $HOSTADDRESS$ -c "$USER1$/check_procs -u postgres -w $ARG1$ -c $ARG2$ -a $ARG3$"
         }
 
diff --git a/configs/system/nagios/services/pgsql.cfg b/configs/system/nagios/services/pgsql.cfg
index 797c31e..ce732c4 100644
--- a/configs/system/nagios/services/pgsql.cfg
+++ b/configs/system/nagios/services/pgsql.cfg
@@ -8,7 +8,7 @@ define service {
 define service {
   host_name		db2
   service_description   Check Koji DB Connections
-  check_command         check_postgres_conns!50!60!koji
+  check_command         check_by_nrpe!check_postgres_conns!50!60!koji
   use                   defaulttemplate
 }

commit e7509372e1aab890233573df35b7de4c10845453
Author: Ricky Zhou <[email-masked]>
Date:   Sun Jul 20 01:22:38 2008 +0000

    First attempt at checking the number of db connections.  Number may need to be tweaked, and we might want to move this to to a paging template if it all works out.

diff --git a/configs/system/nagios/checkcommands.cfg b/configs/system/nagios/checkcommands.cfg
index 6dd1fc7..64ba003 100644
--- a/configs/system/nagios/checkcommands.cfg
+++ b/configs/system/nagios/checkcommands.cfg
@@ -144,7 +144,6 @@ define command{
         command_line    $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
         }
 
-
 # 'check_local_users' command definition
 define command{
         command_name    check_local_users
@@ -238,3 +237,10 @@ define command{
         command_name    check_git
         command_line    $USER1$/check_tcp -H $HOSTADDRESS$ -p 9418
 }
+
+# 'check_postgres_conns' command definition
+define command{
+        command_name    check_postgres_conns
+        command_line    $USER1$/check_procs -u postgres -w $ARG1$ -c $ARG2$ -a $ARG3$
+        }
+
diff --git a/configs/system/nagios/services/pgsql.cfg b/configs/system/nagios/services/pgsql.cfg
index c73c972..797c31e 100644
--- a/configs/system/nagios/services/pgsql.cfg
+++ b/configs/system/nagios/services/pgsql.cfg
@@ -5,3 +5,10 @@ define service {
   use                   defaulttemplate
 }
 
+define service {
+  host_name		db2
+  service_description   Check Koji DB Connections
+  check_command         check_postgres_conns!50!60!koji
+  use                   defaulttemplate
+}
+

commit 195d7137a3738deeb0eb73b401a0c606c8778407
Author: Ricky Zhou <[email-masked]>
Date:   Sat Jul 19 20:42:13 2008 +0000

    Try enabling text notifications again :-)

diff --git a/configs/system/nagios-external/contactgroups/fedora-sysadmin-pager.cfg b/configs/system/nagios-external/contactgroups/fedora-sysadmin-pager.cfg
index 78dc997..81ee9d3 100644
--- a/configs/system/nagios-external/contactgroups/fedora-sysadmin-pager.cfg
+++ b/configs/system/nagios-external/contactgroups/fedora-sysadmin-pager.cfg
@@ -1,5 +1,5 @@
 define contactgroup{
         contactgroup_name       fedora-sysadmin-pager
         alias                   Fedora Sysadmin Pager Contacts
-	members mmcgrathp,skvidalp
+	members mmcgrathp,skvidalp,rickyp
         }
diff --git a/configs/system/nagios-external/contacts/ricky.cfg b/configs/system/nagios-external/contacts/ricky.cfg
index 596b7a8..fbecf92 100644
--- a/configs/system/nagios-external/contacts/ricky.cfg
+++ b/configs/system/nagios-external/contacts/ricky.cfg
@@ -10,16 +10,16 @@ define contact{
     email                           [email-masked]
 }
 
-#define contact{
-#    contact_name        rickyp
-#    alias           Ricky Zhou
-#    service_notification_period     24x7
-#    host_notification_period        24x7
-#    service_notification_options    w,u,c,r
-#    host_notification_options       d,u,r
-#    service_notification_commands   notify-by-epager
-#    host_notification_commands      host-notify-by-epager
-#    email               [email-masked]
-#    pager               [email-masked]
-#}
+define contact{
+    contact_name        rickyp
+    alias           Ricky Zhou
+    service_notification_period     24x7
+    host_notification_period        24x7
+    service_notification_options    w,u,c,r
+    host_notification_options       d,u,r
+    service_notification_commands   notify-by-epager
+    host_notification_commands      host-notify-by-epager
+    email               [email-masked]
+    pager               [email-masked]
+}
 
diff --git a/configs/system/nagios/contactgroups/fedora-sysadmin-pager.cfg b/configs/system/nagios/contactgroups/fedora-sysadmin-pager.cfg
index 736f36d..63780fd 100644
--- a/configs/system/nagios/contactgroups/fedora-sysadmin-pager.cfg
+++ b/configs/system/nagios/contactgroups/fedora-sysadmin-pager.cfg
@@ -1,10 +1,10 @@
 define contactgroup{
     contactgroup_name       fedora-sysadmin-pager
     alias                   Fedora Sysadmin Pager Contacts
-    members mmcgrathp,skvidalp
+    members mmcgrathp,skvidalp,rickyp
 }
 define contactgroup{
     contactgroup_name       fedora-sysadmin-emergency
     alias                   Fedora Sysadmin Pager Contacts
-    members mmcgrath-emergency,skvidal-emergency
+    members mmcgrath-emergency,skvidal-emergency,ricky-emergency
 }
diff --git a/configs/system/nagios/contacts/ricky.cfg b/configs/system/nagios/contacts/ricky.cfg
index 81ad7f0..b517523 100644
--- a/configs/system/nagios/contacts/ricky.cfg
+++ b/configs/system/nagios/contacts/ricky.cfg
@@ -10,29 +10,29 @@ define contact{
     email                           [email-masked]
 }
 
-#define contact{
-#    contact_name        ricky-emergency
-#    alias           Ricky Zhou
-#    service_notification_period     24x7
-#    host_notification_period        24x7
-#    service_notification_options    w,u,c,r
-#    host_notification_options       d,u,r
-#    service_notification_commands   notify-by-epager
-#    host_notification_commands      host-notify-by-epager
-#    email               [email-masked]
-#    pager               [email-masked]
-#}
-#
-#define contact{
-#    contact_name        rickyp
-#    alias           Ricky Zhou
-#    service_notification_period     16x7
-#    host_notification_period        16x7
-#    service_notification_options    w,u,c,r
-#    host_notification_options       d,u,r
-#    service_notification_commands   notify-by-epager
-#    host_notification_commands      host-notify-by-epager
-#    email               [email-masked]
-#    pager               [email-masked]
-#}
+define contact{
+    contact_name        ricky-emergency
+    alias           Ricky Zhou
+    service_notification_period     24x7
+    host_notification_period        24x7
+    service_notification_options    w,u,c,r
+    host_notification_options       d,u,r
+    service_notification_commands   notify-by-epager
+    host_notification_commands      host-notify-by-epager
+    email               [email-masked]
+    pager               [email-masked]
+}
+
+define contact{
+    contact_name        rickyp
+    alias           Ricky Zhou
+    service_notification_period     16x7
+    host_notification_period        16x7
+    service_notification_options    w,u,c,r
+    host_notification_options       d,u,r
+    service_notification_commands   notify-by-epager
+    host_notification_commands      host-notify-by-epager
+    email               [email-masked]
+    pager               [email-masked]
+}
 
diff --git a/configs/system/pager.py b/configs/system/pager.py
index e03cd94..b2b19ba 100755
--- a/configs/system/pager.py
+++ b/configs/system/pager.py
@@ -10,7 +10,7 @@ cgitb.enable()
 to = { 'mmcgrath' : [email-masked]',
 	'ausil' : [email-masked]',
 	'lmacken' : [email-masked]',
-	'ricky' : [email-masked]' # Testing
+	'ricky' : [email-masked]'
 	}
 
 print 'Content-type: text/html'

commit 341dcdf45fd8bf2c407c61980d0548478d240fad
Author: Jason Taylor <[email-masked]>
Date:   Sat Jul 19 13:28:42 2008 +0000

    moving/changing to noc2

diff --git a/configs/system/nagios/services/koji_http.cfg b/configs/system/nagios/services/koji_http.cfg
deleted file mode 100644
index 7905388..0000000
--- a/configs/system/nagios/services/koji_http.cfg
+++ /dev/null
@@ -1,15 +0,0 @@
-# This is supposed to check HTTP service status on koji
-
-define service{
-	service_description	$SERVICEDESC$
-	host_name		koji
-	check_command		check_http
-	max_check_attempts	2
-	normal_check_interval	5
-	retry_check_interval	1
-	check_period		24x7
-	notification_interval	10
-	notification_period	24x7
-	notification_options	c,w,u
-	contact_groups		fedora-sysadmin-email
-	}

commit d2a2107b19f720bc77ef780543e2dade878b37c6
Author: Jason Taylor <[email-masked]>
Date:   Sat Jul 19 13:01:28 2008 +0000

    HTTP check for koji

diff --git a/configs/system/nagios/services/koji_http.cfg b/configs/system/nagios/services/koji_http.cfg
new file mode 100644
index 0000000..7905388
--- /dev/null
+++ b/configs/system/nagios/services/koji_http.cfg
@@ -0,0 +1,15 @@
+# This is supposed to check HTTP service status on koji
+
+define service{
+	service_description	$SERVICEDESC$
+	host_name		koji
+	check_command		check_http
+	max_check_attempts	2
+	normal_check_interval	5
+	retry_check_interval	1
+	check_period		24x7
+	notification_interval	10
+	notification_period	24x7
+	notification_options	c,w,u
+	contact_groups		fedora-sysadmin-email
+	}

commit adc5a2cd448725750ca12a32f1b0a0a42720ecdc
Author: Ricky Zhou <[email-masked]>
Date:   Sat Jul 19 03:36:19 2008 +0000

    Get one on noc2 as well.

diff --git a/manifests/nodes/noc2.fedoraproject.org.pp b/manifests/nodes/noc2.fedoraproject.org.pp
index c3525ed..1cf507f 100644
--- a/manifests/nodes/noc2.fedoraproject.org.pp
+++ b/manifests/nodes/noc2.fedoraproject.org.pp
@@ -5,6 +5,7 @@ node noc2{
     include fas
     include vpn
     include nagios-server-external
+    include pager
 
     $tcpPorts = [ 80, 443, 873 ]
     $udpPorts = [ ]

commit 06de531eb3f255f385128a086bb2b60df13b83ea
Author: Ricky Zhou <[email-masked]>
Date:   Sat Jul 19 03:33:32 2008 +0000

    All right, kill it altogether.

diff --git a/manifests/services/pager.pp b/manifests/services/pager.pp
index fc61dde..3f2033a 100644
--- a/manifests/services/pager.pp
+++ b/manifests/services/pager.pp
@@ -1,7 +1,6 @@
 # class for our maps (fedoraproject.org/maps) setup
 
 class pager {
-    include httpd
 
     script { '/srv/web/pager.py':
         source => 'system/pager.py'

commit 59e7a54f81adffae3ee46485b3f8222e99e78b5a
Author: Ricky Zhou <[email-masked]>
Date:   Sat Jul 19 03:29:54 2008 +0000

    Don't redefine httpd.

diff --git a/manifests/services/pager.pp b/manifests/services/pager.pp
index 32440f3..fc61dde 100644
--- a/manifests/services/pager.pp
+++ b/manifests/services/pager.pp
@@ -1,7 +1,7 @@
 # class for our maps (fedoraproject.org/maps) setup
 
 class pager {
-    include apache::base
+    include httpd
 
     script { '/srv/web/pager.py':
         source => 'system/pager.py'

commit 881cdb045343cbaebb10867ecab0e9050c7379cf
Author: Ricky Zhou <[email-masked]>
Date:   Sat Jul 19 03:27:14 2008 +0000

    Move pager from lockbox to noc1 and noc2.

diff --git a/configs/system/pager.py b/configs/system/pager.py
new file mode 100755
index 0000000..e03cd94
--- /dev/null
+++ b/configs/system/pager.py
@@ -0,0 +1,73 @@
+#!/usr/bin/python
+
+import cgi
+import cgitb
+import smtplib
+import datetime
+import sys
+cgitb.enable()
+
+to = { 'mmcgrath' : [email-masked]',
+	'ausil' : [email-masked]',
+	'lmacken' : [email-masked]',
+	'ricky' : [email-masked]' # Testing
+	}
+
+print 'Content-type: text/html'
+print
+print
+
+# Flood check:
+try:
+    f = open('/var/tmp/flood.protect', 'r')
+    last =  int(f.readlines()[0])
+    f.close()
+    now = int(datetime.datetime.now().strftime('%s'))
+    if last + 120 >= now:
+	    print 'Flood Protection. Please wait %s seconds' % (last + 120 - now)
+	    sys.exit(1)
+except IOError:
+    pass
+
+
+form = cgi.FieldStorage()
+if form.has_key('who') and form.has_key('message') and form.has_key('fromAddr'):
+	f = open('/var/tmp/flood.protect', 'w')
+	f.write(datetime.datetime.now().strftime('%s'))
+	f.close()
+
+	message = 'Subject: Emergency Page - %s!\n%s' % (form['fromAddr'].value, form['message'].value)
+	fromAddr = form['fromAddr'].value
+	S = smtplib.SMTP('localhost')
+	errdict = S.sendmail( from_addr = [email-masked]',
+				to_addrs = [ [email-masked]',
+						fromAddr,
+						to[form['who'].value] ],
+				msg = message)
+	if len(errdict) != 0:
+		print 'Not all addresses accepted'
+		print 'Failed addresses:', errdict.keys()
+	else:
+		print 'Thank You.  Page sent successfully'
+else:
+	print '''
+<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
+<html>
+<head><title>Something is borked?</title></head>
+<body>
+<p>By submitting to this page your IP is being logged.  And please think before waking someone up</p>
+	<form method="post">
+		Name: <select name='who'>
+				<option value="">Select</option>
+				<option value="mmcgrath">Mike McGrath</option>
+				<option value="ausil">Dennis Gilmore</option>
+				<option value="lmacken">Luke Macken</option>
+				<option value="ricky">Ricky Zhou</option>
+			</select><br>
+		Message: <textarea name="message"></textarea>(keep it short)<br>
+		From (email): <input type="textbox" name="fromAddr">
+		<br><input type="submit">
+	</form>
+</body>
+</html>
+'''
diff --git a/configs/web/admin.fedoraproject.org/pager.conf b/configs/web/admin.fedoraproject.org/pager.conf
index f7bb810..49dd4da 100644
--- a/configs/web/admin.fedoraproject.org/pager.conf
+++ b/configs/web/admin.fedoraproject.org/pager.conf
@@ -1 +1 @@
-ProxyPass	/pager	http://lockbox.fedora.phx.redhat.com/pager
+ProxyPass /pager http://noc1.fedora.phx.redhat.com/pager
diff --git a/configs/web/applications/pager.conf b/configs/web/applications/pager.conf
new file mode 100644
index 0000000..91fdd52
--- /dev/null
+++ b/configs/web/applications/pager.conf
@@ -0,0 +1 @@
+ScriptAlias /pager /srv/web/pager.py
diff --git a/manifests/nodes/noc1.fedora.phx.redhat.com.pp b/manifests/nodes/noc1.fedora.phx.redhat.com.pp
index 6c42758..5981dce 100644
--- a/manifests/nodes/noc1.fedora.phx.redhat.com.pp
+++ b/manifests/nodes/noc1.fedora.phx.redhat.com.pp
@@ -3,4 +3,5 @@ node noc1{
     include noc
     include vpn
     include dhcpserver
+    include pager
 }
diff --git a/manifests/services/pager.pp b/manifests/services/pager.pp
new file mode 100644
index 0000000..32440f3
--- /dev/null
+++ b/manifests/services/pager.pp
@@ -0,0 +1,14 @@
+# class for our maps (fedoraproject.org/maps) setup
+
+class pager {
+    include apache::base
+
+    script { '/srv/web/pager.py':
+        source => 'system/pager.py'
+    }
+
+    apachefile { "/etc/httpd/conf.d/pager.conf":
+        source => 'web/applications/pager.conf'
+    }
+
+}

commit 4cb10533fc000f8c6f721ebe4720e7478ef13ae9
Author: Ricky Zhou <[email-masked]>
Date:   Sat Jul 19 02:14:09 2008 +0000

    Include query string for koji.

diff --git a/modules/awstats/files/awstats.koji.fedoraproject.org.conf b/modules/awstats/files/awstats.koji.fedoraproject.org.conf
index aeb353b..c8dcea8 100644
--- a/modules/awstats/files/awstats.koji.fedoraproject.org.conf
+++ b/modules/awstats/files/awstats.koji.fedoraproject.org.conf
@@ -651,7 +651,7 @@ URLQuerySeparators="?;"
 # 1 - Full URL with query string is used     (ie: "/mypage.html?p=x&q=y")
 # Default: 0
 # 
-URLWithQuery=0
+URLWithQuery=1

 # When URLWithQuery is on, you will get the full URL with all parameters in

commit efe44f7cc25020bded3e9371a7651e18d95e2954
Author: Ricky Zhou <[email-masked]>
Date:   Sat Jul 19 02:09:37 2008 +0000

    Fix typo.

diff --git a/modules/awstats/manifests/init.pp b/modules/awstats/manifests/init.pp
index 676175a..5d26489 100644
--- a/modules/awstats/manifests/init.pp
+++ b/modules/awstats/manifests/init.pp
@@ -42,7 +42,7 @@ class awstats::base {
     }
 
     file { '/etc/awstats/awstats.koji.fedoraproject.org.conf':
-        source => 'puppet:///awstats/koji.fedoraproject.org.conf',
+        source => 'puppet:///awstats/awstats.koji.fedoraproject.org.conf',
     }
 
     file { '/etc/awstats/awstats.fedorahosted.org.conf':

commit d3f6c61619f0f414456956259a1d745dec259d39
Author: Ricky Zhou <[email-masked]>
Date:   Sat Jul 19 02:07:11 2008 +0000

    Add koji.fp.o.

diff --git a/modules/awstats/files/awstats.cron b/modules/awstats/files/awstats.cron
index 9b76c3f..d8a57cd 100755
--- a/modules/awstats/files/awstats.cron
+++ b/modules/awstats/files/awstats.cron
@@ -25,6 +25,11 @@ mkdir -p /var/www/html/awstats/translate.fedoraproject.org
 /usr/share/awstats/tools/awstats_buildstaticpages.pl -config=translate.fedoraproject.org -update -dir=/var/www/html/awstats/translate.fedoraproject.org > /dev/null
 ln -sf /var/www/html/awstats/translate.fedoraproject.org/awstats.translate.fedoraproject.org.html  /var/www/html/awstats/translate.fedoraproject.org/index.html
 
+# koji.fedoraproject.org
+mkdir -p /var/www/html/awstats/koji.fedoraproject.org
+/usr/share/awstats/tools/awstats_buildstaticpages.pl -config=koji.fedoraproject.org -update -dir=/var/www/html/awstats/koji.fedoraproject.org > /dev/null
+ln -sf /var/www/html/awstats/koji.fedoraproject.org/awstats.koji.fedoraproject.org.html  /var/www/html/awstats/koji.fedoraproject.org/index.html
+
 # fedorahosted.org
 mkdir -p /var/www/html/awstats/fedorahosted.org
 /usr/share/awstats/tools/awstats_buildstaticpages.pl -config=fedorahosted.org -update -dir=/var/www/html/awstats/fedorahosted.org > /dev/null
diff --git a/modules/awstats/files/awstats.koji.fedoraproject.org.conf b/modules/awstats/files/awstats.koji.fedoraproject.org.conf
new file mode 100644
index 0000000..aeb353b
--- /dev/null
+++ b/modules/awstats/files/awstats.koji.fedoraproject.org.conf
@@ -0,0 +1,1499 @@
+# AWSTATS CONFIGURE FILE 6.6
+#-----------------------------------------------------------------------------
+# Copy this file into awstats.www.mydomain.conf and edit this new config file
+# to setup AWStats (See documentation in docs/ directory).
+# The config file must be in /etc/awstats, /usr/local/etc/awstats or /etc (for
+# Unix/Linux) or same directory than awstats.pl (Windows, Mac, Unix/Linux...)
+# To include an environment variable in any parameter (AWStats will replace
+# it with its value when reading it), follow the example:
+# Parameter="__ENVNAME__"
+# Note that environment variable AWSTATS_CURRENT_CONFIG is always defined with
+# the config value in an AWStats running session and can be used like others.
+#-----------------------------------------------------------------------------
+# $Revision: 1.327 $ - $Author: eldy $ - $Date: 2006/04/21 22:28:49 $
+
+
+
+#-----------------------------------------------------------------------------
+# MAIN SETUP SECTION (Required to make AWStats work)
+#-----------------------------------------------------------------------------
+
+# "LogFile" contains the web, ftp or mail server log file to analyze.
+# Possible values: A full path, or a relative path from awstats.pl directory.
+# Example: "/var/log/apache/access.log"
+# Example: "../logs/mycombinedlog.log"
+# You can also use tags in this filename if you need a dynamic file name
+# depending on date or time (Replacement is made by AWStats at the beginning
+# of its execution). This is available tags :
+#   %YYYY-n  is replaced with 4 digits year we were n hours ago
+#   %YY-n    is replaced with 2 digits year we were n hours ago
+#   %MM-n    is replaced with 2 digits month we were n hours ago
+#   %MO-n    is replaced with 3 letters month we were n hours ago
+#   %DD-n    is replaced with day we were n hours ago
+#   %HH-n    is replaced with hour we were n hours ago
+#   %NS-n    is replaced with number of seconds at 00:00 since 1970
+#   %WM-n    is replaced with the week number in month (1-5)
+#   %Wm-n    is replaced with the week number in month (0-4)
+#   %WY-n    is replaced with the week number in year (01-52)
+#   %Wy-n    is replaced with the week number in year (00-51)
+#   %DW-n    is replaced with the day number in week (1-7, 1=sunday)
+#                              use n=24 if you need (1-7, 1=monday)
+#   %Dw-n    is replaced with the day number in week (0-6, 0=sunday)
+#                              use n=24 if you need (0-6, 0=monday)
+#   Use 0 for n if you need current year, month, day, hour...
+# Example: "/var/log/access_log.%YYYY-0%MM-0%DD-0.log"
+# Example: "C:/WINNT/system32/LogFiles/W3SVC1/ex%YY-24%MM-24%DD-24.log"
+# You can also use a pipe if log file come from a pipe :
+# Example: "gzip -d </var/log/apache/access.log.gz |"
+# If there are several log files from load balancing servers :
+# Example: "/pathtotools/logresolvemerge.pl *.log |"
+#
+LogFile="/usr/share/awstats/tools/logresolvemerge.pl /var/log/hosts/koji.fedoraproject.org/*/*/*/http/koji.fedoraproject.org-access.log | sed -e 's/^ //' |"
+
+
+# Enter the log file type you want to analyze.
+# Possible values:
+#  W - For a web log file
+#  S - For a streaming log file
+#  M - For a mail log file
+#  F - For a ftp log file
+# Example: W
+# Default: W
+#
+LogType=W
+
+
+# Enter here your log format (Must match your web server config. See setup
+# instructions in documentation to know how to configure your web server to
+# have the required log format).
+# Possible values: 1,2,3,4 or "your_own_personalized_log_format"
+# 1 - Apache or Lotus Notes/Domino native combined log format (NCSA combined/XLF/ELF log format)
+# 2 - IIS or ISA format (IIS W3C log format). See FAQ-COM115 For ISA.
+# 3 - Webstar native log format.
+# 4 - Apache or Squid native common log format (NCSA common/CLF log format)
+#     With LogFormat=4, some features (browsers, os, keywords...) can't work.
+# "your_own_personalized_log_format" = If your log is ftp, mail or other format,
+#     you must use following keys to define the log format string (See FAQ for
+#     ftp, mail or exotic web log format examples):
+#   %host             Client hostname or IP address (or Sender host for mail log)
+#   %host_r           Receiver hostname or IP address (for mail log)
+#   %lognamequot      Authenticated login/user with format: "john"
+#   %logname          Authenticated login/user with format: john
+#   %time1            Date and time with format: [dd/mon/yyyy:hh:mm:ss +0000] or [dd/mon/yyyy:hh:mm:ss]
+#   %time2            Date and time with format: yyyy-mm-dd hh:mm:ss
+#   %time3            Date and time with format: Mon dd hh:mm:ss or Mon dd hh:mm:ss yyyy
+#   %time4            Date and time with unix timestamp format: dddddddddd
+#   %methodurl        Method and URL with format: "GET /index.html HTTP/x.x"
+#   %methodurlnoprot  Method and URL with format: "GET /index.html"
+#   %method           Method with format: GET
+#   %url              URL only with format: /index.html
+#   %query            Query string (used by URLWithQuery option)
+#   %code             Return code status (with format for web log: 999)
+#   %bytesd           Size of document in bytes
+#   %refererquot      Referer page with format: "http://from.com/from.htm"
+#   %referer          Referer page with format: http://from.com/from.htm
+#   %uabracket        User agent with format: [Mozilla/4.0 (compatible, ...)]
+#   %uaquot           User agent with format: "Mozilla/4.0 (compatible, ...)"
+#   %ua               User agent with format: Mozilla/4.0_(compatible...)
+#   %gzipin           mod_gzip compression input bytes: In:XXX
+#   %gzipout          mod_gzip compression output bytes & ratio: Out:YYY:ZZpct.
+#   %gzipratio        mod_gzip compression ratio: ZZpct.
+#   %deflateratio     mod_deflate compression ratio with format: (ZZ)
+#   %email            EMail sender (for mail log)
+#   %email_r          EMail receiver (for mail log)
+#   %virtualname      Web sever virtual hostname. Use this tag when same log
+#                     contains data of several virtual web servers. AWStats
+#                     will discard records not in SiteDomain nor HostAliases
+#   %cluster          If log file is provided from several computers (merged by
+#                     logresolvemerge.pl), use this to define cluster id field.
+#   %extraX           Another field that you plan to use for building a
+#                     personalized report with ExtraSection feature (See later).
+#   If your log format has some fields not included in this list, use:
+#   %other            Means another not used field
+#   %otherquot        Means another not used double quoted field
+#
+# Examples for Apache combined logs (following two examples are equivalent):
+# LogFormat = 1
+# LogFormat = "%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot"
+#
+# Example for IIS:
+# LogFormat = 2
+#
+LogFormat = 1
+
+
+# If your log field's separator is not a space, you can change this parameter.
+# This parameter is not used if LogFormat is a predefined value (1,2,3,4)
+# Backslash can be used as escape character.
+# Example: " "
+# Example: "\t"
+# Example: "\|"
+# Example: ","
+# Default: " "
+#
+LogSeparator=" "
+
+
+# "SiteDomain" must contain the main domain name, or the main intranet web
+# server name, used to reach the web site.
+# If you share the same log file for several virtual web servers, this
+# parameter is used to tell AWStats to filter record that contains records for
+# this virtual host name only (So check that this virtual hostname can be
+# found in your log file and use a personalized log format that include the
+# %virtualname tag).
+# But for multi hosting a better solution is to have one log file for each
+# virtual web server. In this case, this parameter is only used to generate
+# full URL's links when ShowLinksOnUrl option is set to 1.
+# If analyzing mail log, enter here the domain name of mail server.
+# Example: "myintranetserver"
+# Example: "www.domain.com"
+# Example: "ftp.domain.com"
+# Example: "domain.com"
+#
+SiteDomain="koji.fedoraproject.org"
+
+
+# Enter here all other possible domain names, addresses or virtual host
+# aliases someone can use to access your site. Try to keep only the minimum
+# number of possible names/addresses to have the best performances.
+# You can repeat the "SiteDomain" value in this list.
+# This parameter is used to analyze referer field in log file and to help
+# AWStats to know if a referer URL is a local URL of same site or an URL of
+# another site.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Note: You can also use @/mypath/myfile if list of aliases are in a file.
+# Example: "www.myserver.com localhost 127.0.0.1 REGEX[mydomain\.(net|org)$]"
+#
+HostAliases="REGEX[.*\.fedoraproject\.org]"
+
+
+# If you want to have hosts reported by name instead of ip address, AWStats
+# need to make reverse DNS lookups (if not already done in your log file).
+# With DNSLookup to 0, all hosts will be reported by their IP addresses and
+# not by the full hostname of visitors (except if names are already available
+# in log file).
+# If you want/need to set DNSLookup to 1, don't forget that this will reduce
+# dramatically AWStats update process speed. Do not use on large web sites.
+# Note: Reverse DNS lookup is done on IPv4 only (Enable ipv6 plugin for IPv6).
+# Note: Result of DNS Lookup can be used to build the Country report. However
+# it is highly recommanded to enable the plugin 'geoipfree' or 'geoip' to
+# have an accurate Country report with no need of DNS Lookup.
+# Possible values:
+# 0 - No DNS Lookup
+# 1 - DNS Lookup is fully enabled
+# 2 - DNS Lookup is made only from static DNS cache file (if it exists)
+# Default: 2
+# 
+DNSLookup=2
+
+
+# When AWStats updates its statistics, it stores results of its analysis in 
+# files (AWStats database). All those files are written in the directory
+# defined by the "DirData" parameter. Set this value to the directory where
+# you want AWStats to save its database and working files into.
+# Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser"
+# feature (see later), you need "Write" permissions by web server user on this
+# directory (and "Modify" for Windows NTFS file systems).
+# Example: "/var/lib/awstats"
+# Example: "../data"
+# Example: "C:/awstats_data_dir"
+# Default: "."          (means same directory as awstats.pl)
+#
+DirData="/var/lib/awstats"
+
+
+# Relative or absolute web URL of your awstats cgi-bin directory.
+# This parameter is used only when AWStats is run from command line
+# with -output option (to generate links in HTML reported page).
+# Example: "/awstats"
+# Default: "/cgi-bin"   (means awstats.pl is in "/yourwwwroot/cgi-bin")
+#
+DirCgi="/awstats"
+
+
+# Relative or absolute web URL of your awstats icon directory.
+# If you build static reports ("... -output > outputpath/output.html"), enter
+# path of icon directory relative to the output directory 'outputpath'.
+# Example: "/awstatsicons"
+# Example: "../icon"
+# Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon")
+#
+DirIcons="/awstatsicons"
+
+
+# When this parameter is set to 1, AWStats adds a button on report page to
+# allow to "update" statistics from a web browser. Warning, when "update" is
+# made from a browser, AWStats is run as a CGI by the web server user defined
+# in your web server (user "nobody" by default with Apache, "IUSR_XXX" with
+# IIS), so the "DirData" directory and all already existing history files
+# awstatsMMYYYY[.xxx].txt must be writable by this user. Change permissions if
+# necessary to "Read/Write" (and "Modify" for Windows NTFS file systems).
+# Warning: Update process can be long so you might experience "time out"
+# browser errors if you don't launch AWStats frequently enough.
+# When set to 0, update is only made when AWStats is run from the command
+# line interface (or a task scheduler).
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowToUpdateStatsFromBrowser=0
+
+
+# AWStats saves and sorts its database on a month basis (except if using
+# databasebreak option from command line). 
+# However, if you choose the -month=all from command line or
+# value '-Year-' from CGI combo form to have a report for all year, AWStats
+# needs to reload all data for full year (each month), and sort them,
+# requiring a large amount of time, memory and CPU. This might be a problem
+# for web hosting providers that offer AWStats for large sites, on shared
+# servers, to non CPU cautious customers.
+# For this reason, the 'full year' is only enabled on Command Line by default.
+# You can change this by setting this parameter to 0, 1, 2 or 3.
+# Possible values:
+#  0 - Never allowed
+#  1 - Allowed on CLI only, -Year- value in combo is not visible
+#  2 - Allowed on CLI only, -Year- value in combo is visible but not allowed
+#  3 - Possible on CLI and CGI
+# Default: 2
+#
+AllowFullYearView=2
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When the update process runs, AWStats can set a lock file in TEMP or TMP
+# directory. This lock is to avoid to have 2 update processes running at the
+# same time to prevent unknown conflicts problems and avoid DoS attacks when
+# AllowToUpdateStatsFromBrowser is set to 1.
+# Because, when you use lock file, you can experience sometimes problems in
+# lock file not correctly removed (killed process for example requires that
+# you remove the file manualy), this option is not enabled by default (Do
+# not enable this option with no console server access).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+EnableLockForUpdate=1
+
+
+# AWStats can do reverse DNS lookups through a static DNS cache file that was
+# previously created manually. If no path is given in static DNS cache file
+# name, AWStats will search DirData directory. This file is never changed.
+# This option is not used if DNSLookup=0.
+# Note: DNS cache file format is 'minsince1970 ipaddress resolved_hostname'
+# or just 'ipaddress resolved_hostname'
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscache"
+# Default: "dnscache.txt"
+#
+DNSStaticCacheFile="dnscache.txt"
+
+
+# AWStats can do reverse DNS lookups through a DNS cache file that was created
+# by a previous run of AWStats. This file is erased and recreated after each
+# statistics update process. You don't need to create and/or edit it.
+# AWStats will read and save this file in DirData directory.
+# This option is used only if DNSLookup=1.
+# Note: If a DNSStaticCacheFile is available, AWStats will check for DNS
+# lookup in DNSLastUpdateCacheFile after checking into DNSStaticCacheFile.
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscachelastupdate"
+# Default: "dnscachelastupdate.txt"
+#
+DNSLastUpdateCacheFile="dnscachelastupdate.txt"
+
+
+# You can specify specific IP addresses that should NOT be looked up in DNS.
+# This option is used only if DNSLookup=1.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "123.123.123.123 REGEX[^192\.168\.]"
+# Default: ""
+#
+SkipDNSLookupFor=""
+
+
+# The following two parameters allow you to protect a config file from being
+# read by AWStats when called from a browser if web user has not been
+# authenticated. Your AWStats program must be in a web protected "realm" (With
+# Apache, you can use .htaccess files to do so. With other web servers, see
+# your server setup manual).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowAccessFromWebToAuthenticatedUsersOnly=0
+
+
+# This parameter gives the list of all authorized authenticated users to view
+# statistics for this domain/config file. This parameter is used only if
+# AllowAccessFromWebToAuthenticatedUsersOnly is set to 1.
+# Change : Effective immediatly
+# Example: "user1 user2"
+# Example: "__REMOTE_USER__"
+# Default: ""
+#
+AllowAccessFromWebToFollowingAuthenticatedUsers=""
+
+
+# When this parameter is defined to something, the IP address of the user that
+# reads its statistics from a browser (when AWStats is used as a CGI) is
+# checked and must match one of the IP address values or ranges.
+# Change : Effective immediatly
+# Example: "127.0.0.1 123.123.123.1-123.123.123.255"
+# Default: ""
+#
+AllowAccessFromWebToFollowingIPAddresses=""
+
+
+# If the "DirData" directory (see above) does not exist, AWStats return an
+# error. However, you can ask AWStats to create it.
+# This option can be used by some Web Hosting Providers that has defined a 
+# dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and
+# don't want to have to create a new directory each time they add a new user.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+CreateDirDataIfNotExists=0
+
+
+# You can choose in which format the Awstats history database is saved.
+# Note: Using "xml" format make AWStats building database files three times
+# larger than using "text" format.
+# Change : Database format is switched after next update
+# Possible values: text or xml
+# Default: text
+#
+BuildHistoryFormat=text
+
+
+# If you prefer having the report output pages be built as XML compliant pages
+# instead of simple HTML pages, you can set this to 'xhtml' (May not work
+# properly with old browsers).
+# Change : Effective immediatly
+# Possible values: html or xhtml
+# Default: html
+#
+BuildReportFormat=html
+
+
+# AWStats databases can be updated from command line of from a browser (when
+# used as a cgi program). So AWStats database files need write permission
+# for both command line user and default web server user (nobody for Unix,
+# IUSR_xxx for IIS/Windows,...).
+# To avoid permission problems between update process (run by an admin user)
+# and CGI process (ran by a low level user), AWStats can save its database 
+# files with read and write permissions for everyone.
+# By default, AWStats keeps default user permissions on updated files. If you 
+# set AllowToUpdateStatsFromBrowser to 1, you can change this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+SaveDatabaseFilesWithPermissionsForEveryone=0
+
+
+# AWStats can purge log file, after analyzing it. Note that AWStats is able
+# to detect new lines in a log file, to process only them, so you can launch
+# AWStats as often as you want, even with this parameter to 0.
+# With 0, no purge is made, so you must use a scheduled task or a web server
+# that make this purge frequently.
+# With 1, the purge of the log file is made each time AWStats update is run.
+# This parameter doesn't work with IIS (This web server doesn't let its log
+# file to be purged).
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+PurgeLogFile=0
+
+
+# When PurgeLogFile is setup to 1, AWStats will clean your log file after
+# processing it. You can however keep an archive file of all processed log
+# records by setting this parameter (For example if you want to use another
+# log analyzer). The archived log file is saved in "DirData" with name
+# awstats_archive.configname[.suffix].log
+# This parameter is not used if PurgeLogFile=0
+# Change : Effective for new updates only
+# Possible values: 0, 1, or tags (See LogFile parameter) for suffix
+# Example: 1
+# Example: %YYYY%MM%DD
+# Default: 0
+#
+ArchiveLogRecords=0
+
+
+# Each time you run the update process, AWStats overwrites the 'historic file'
+# for the month (awstatsMMYYYY[.*].txt) with the updated one.
+# When write errors occurs (IO, disk full,...), this historic file can be
+# corrupted and must be deleted. Because this file contains information of all
+# past processed log files, you will loose old stats if removed. So you can
+# ask AWStats to save last non corrupted file in a .bak file. This file is
+# stored in "DirData" directory with other 'historic files'.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+KeepBackupOfHistoricFiles=0
+
+
+# Default index page name for your web server.
+# Change : Effective for new updates only
+# Example: "index.php index.html default.html"
+# Default: "index.html"
+#
+DefaultFile="index.html"
+
+
+# Do not include access from clients that match following criteria.
+# If your log file contains IP addresses in host field, you must enter here
+# matching IP addresses criteria.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "SkipHosts" is "OnlyHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Example: "localhost REGEX[^.*\.localdomain$]"
+# Default: ""
+#
+SkipHosts="127.0.0.1"
+
+
+# Do not include access from clients with a user agent that match following
+# criteria. If you want to exclude a robot, you should update the robots.pm
+# file instead of this parameter.
+# The opposite parameter of "SkipUserAgents" is "OnlyUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "konqueror REGEX[ua_test_v\d\.\d]"
+# Default: ""
+#
+SkipUserAgents=""
+
+
+# Use SkipFiles to ignore access to URLs that match one of following entries.
+# You can enter a list of not important URLs (like framed menus, hidden pages,
+# etc...) to exclude them from statistics. You must enter here exact relative
+# URL as found in log file, or a matching REGEX value. Check apply on URL with
+# all its query paramaters.
+# For example, to ignore /badpage.php, just add "/badpage.php". To ignore all
+# pages in a particular directory, add "REGEX[^\/directorytoexclude]".
+# The opposite parameter of "SkipFiles" is "OnlyFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "/badpage.php /page.php?param=x REGEX[^\/excludedirectory]"
+# Default: ""
+#
+SkipFiles=""
+
+
+# Use SkipReferrersBlackList if you want to exclude records coming from a SPAM
+# referrer. Parameter must receive a local file name containing rules applied
+# on referrer field. If parameter is empty, no filter is applied.
+# An example of such a file is available in lib/blacklist.txt
+# You can download updated version at http://www.jayallen.org/comment_spam/
+# Change : Effective for new updates only
+# Example: "/mylibpath/blacklist.txt"
+# Default: ""
+#
+# WARNING!! Using this feature make AWStats running very slower (5 times slower
+# with black list file provided with AWStats !
+#
+SkipReferrersBlackList=""
+
+
+# Include in stats, only accesses from hosts that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular hosts, you can add those host names in
+# this parameter.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "OnlyHosts" is "SkipHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Default: ""
+#
+OnlyHosts=""
+
+
+# Include in stats, only accesses from user agent that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular browsers, you can add their user agents
+# string in this parameter.
+# The opposite parameter of "OnlyUserAgents" is "SkipUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "msie"
+# Default: ""
+#
+OnlyUserAgents=""
+
+
+# Include in stats, only accesses to URLs that match one of following entries.
+# For example, if you want AWStats to filter access to keep only stats that
+# match a particular string, like a particular directory, you can add this
+# directory name in this parameter.
+# The opposite parameter of "OnlyFiles" is "SkipFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "REGEX[marketing_directory] REGEX[office\/.*\.(csv|sxw)$]"
+# Default: ""
+#
+OnlyFiles=""
+
+
+# Add here a list of kind of url (file extension) that must be counted as
+# "Hit only" and not as a "Hit" and "Page/Download". You can set here all
+# image extensions as they are hit downloaded that must be counted but they
+# are not viewed pages. URLs with such extensions are not included in the TOP
+# Pages/URL report.
+# Note: If you want to exclude particular URLs from stats (No Pages and no
+# Hits reported), you must use SkipFiles parameter.
+# Change : Effective for new updates only
+# Example: "css js class gif jpg jpeg png bmp ico zip arj gz z wav mp3 wma mpg"
+# Example: ""
+# Default: "css js class gif jpg jpeg png bmp ico"
+#
+NotPageList="css js class gif jpg jpeg png bmp ico swf"
+
+
+# By default, AWStats considers that records found in web log file are
+# successful hits if HTTP code returned by server is a valid HTTP code (200
+# and 304). Any other code are reported in HTTP status chart.
+# Note that HTTP 'control codes', like redirection (302, 305) are not added by
+# default in this list as they are not pages seen by a visitor but are
+# protocol exchange codes to tell the browser to ask another page. Because
+# this other page will be counted and seen with a 200 or 304 code, if you 
+# add such codes, you will have 2 pages viewed reported for only one in facts.
+# Change : Effective for new updates only
+# Example: "200 304 302 305"
+# Default: "200 304"
+#
+ValidHTTPCodes="200 304"
+
+
+# By default, AWStats considers that records found in mail log file are
+# successful mail transfers if field that represent return code in analyzed
+# log file match values defined by this parameter.
+# Change : Effective for new updates only
+# Example: "1 250 200"
+# Default: "1 250"
+#
+ValidSMTPCodes="1 250"
+
+
+# Some web servers on some Operating systems (IIS-Windows) consider that a
+# login with same value but different case are the same login. To tell AWStats
+# to also consider them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+AuthenticatedUsersNotCaseSensitive=0
+
+
+# Some web servers on some Operating systems (IIS-Windows) considers that two
+# URLs with same value but different case are the same URL. To tell AWStats to
+# also considers them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+URLNotCaseSensitive=0
+
+
+# Keep or remove the anchor string you can find in some URLs.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+URLWithAnchor=0
+
+
+# In URL links, "?" char is used to add parameter's list in URLs. Syntax is:
+# /mypage.html?param1=value1&param2=value2
+# However, some servers/sites use also other chars to isolate dynamic part of
+# their URLs. You can complete this list with all such characters.
+# Change : Effective for new updates only
+# Example: "?;,"
+# Default: "?;"
+#
+URLQuerySeparators="?;"
+
+
+# Keep or remove the query string to the URL in the statistics for individual
+# pages. This is primarily used to differentiate between the URLs of dynamic
+# pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as two
+# different pages.
+# Warning, when set to 1, memory required to run AWStats is dramatically
+# increased if you have a lot of changing URLs (for example URLs with a random
+# id inside). Such web sites should not set this option to 1 or use seriously
+# the next parameter URLWithQueryWithOnlyFollowingParameters (or eventually 
+# URLWithQueryWithoutFollowingParameters).
+# Change : Effective for new updates only
+# Possible values:
+# 0 - URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used     (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLWithQuery=0
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to keep only parameters
+# you need (if you know them) before counting, manipulating and storing URL.
+# Enter here list of wanted parameters. For example, with "param", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithoutFollowingParameters.
+# Change : Effective for new updates only
+# Example: "param"
+# Default: ""
+# 
+URLWithQueryWithOnlyFollowingParameters=""
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to remove such parameters
+# from the URL before counting, manipulating and storing URL. Enter here list
+# of all non wanted parameters. For example if you enter "id", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithOnlyFollowingParameters.
+# Change : Effective for new updates only
+# Example: "PHPSESSID jsessionid"
+# Default: ""
+# 
+URLWithQueryWithoutFollowingParameters=""
+
+
+# Keep or remove the query string to the referrer URL in the statistics for
+# external referrer pages. This is used to differentiate between the URLs of
+# dynamic referrer pages. If set to 1, mypage.html?id=x and mypage.html?id=y
+# are counted as two different referrer pages.
+# Change : Effective for new updates only
+# Possible values:
+# 0 - Referrer URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used      (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLReferrerWithQuery=0
+
+
+# AWStats can detect setup problems or show you important informations to have
+# a better use. Keep this to 1, except if AWStats says you can change it.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 1
+#
+WarningMessages=1
+
+
+# When an error occurs, AWStats outputs a message related to errors. If you
+# want (in most cases for security reasons) to have no error messages, you
+# can set this parameter to your personalized generic message.
+# Change : Effective immediatly
+# Example: "An error occurred. Contact your Administrator"
+# Default: ""
+#
+ErrorMessages=""
+
+
+# AWStat can be run with debug=x parameter to output various informations
+# to help in debugging or solving troubles. If you want to allow this (not
+# enabled by default for security reasons), set this parameter to 0.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+DebugMessages=0
+
+
+# To help you to detect if your log format is good, AWStats reports an error
+# if all the first NbOfLinesForCorruptedLog lines have a format that does not
+# match the LogFormat parameter.
+# However, some worm virus attack on your web server can result in a very high
+# number of corrupted lines in your log. So if you experience awstats stop
+# because of bad virus records at the beginning of your log file, you can
+# increase this parameter (very rare).
+# Change : Effective for new updates only
+# Default: 50
+#
+NbOfLinesForCorruptedLog=50
+
+
+# For some particular integration needs, you may want to have CGI links to
+# point to another script than awstats.pl.
+# Use the name of this script in WrapperScript parameter.
+# Change : Effective immediatly
+# Example: "awstatslauncher.pl"
+# Default: ""
+#
+WrapperScript=""
+
+
+# DecodeUA must be set to 1 if you use Roxen web server. This server converts
+# all spaces in user agent field into %20. This make the AWStats robots, OS
+# and browsers detection fail in some cases. Just change it to 1 if and only
+# if your web server is Roxen.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+DecodeUA=0
+
+
+# MiscTrackerUrl can be used to make AWStats able to detect some miscellaneous
+# things, that can not be tracked on other way, like:
+# - Javascript disabled
+# - Java enabled
+# - Screen size
+# - Color depth
+# - Macromedia Director plugin
+# - Macromedia Shockwave plugin
+# - Realplayer G2 plugin
+# - QuickTime plugin
+# - Mediaplayer plugin
+# - Acrobat PDF plugin
+# To enable all these features, you must copy the awstats_misc_tracker.js file
+# into a /js/ directory stored in your web document root and add the following
+# HTML code at the end of your index page (but before </BODY>) :
+#
+# <script language=javascript src="/js/awstats_misc_tracker.js"></script>
+# <noscript><img src="/js/awstats_misc_tracker.js?nojs=y" height=0 width=0 border=0 style="display: none"></noscript>
+#
+# If code is not added in index page, all those detection capabilities will be
+# disabled. You must also check that ShowScreenSizeStats and ShowMiscStats
+# parameters are set to 1 to make results appear in AWStats report page.
+# If you want to use another directory than /js/, you must also change the
+# awstatsmisctrackerurl variable into the awstats_misc_tracker.js file.
+# Change : Effective for new updates only.
+# Possible value: URL of javascript tracker file added in your HTML code.
+# Default: "/js/awstats_misc_tracker.js"
+#
+MiscTrackerUrl="/js/awstats_misc_tracker.js"
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# The following values allow you to define accuracy of AWStats entities
+# (robots, browsers, os, referers, file types) detection.
+# It might be a good idea for large web sites or ISP that provides AWStats to
+# high number of customers, to set this parameter to 1 (or 0), instead of 2.
+# Possible values:
+#    0      = No detection,
+#    1      = Medium/Standard detection
+#    2      = Full detection
+# Change : Effective for new updates only
+# Note   : LevelForBrowsersDetection can also accept value "allphones". This
+#          enable detailed detection of phone/pda browsers.
+# Default: 2 (0 for LevelForWormsDetection)
+#
+LevelForBrowsersDetection=2         # 0 disables Browsers detection.
+                                    # 2 reduces AWStats speed by 2%
+                                    # allphones reduces AWStats speed by 5%
+LevelForOSDetection=2               # 0 disables OS detection.
+                                    # 2 reduces AWStats speed by 3%
+LevelForRefererAnalyze=2            # 0 disables Origin detection.
+                                    # 2 reduces AWStats speed by 14%
+LevelForRobotsDetection=2           # 0 disables Robots detection.
+                                    # 2 reduces AWStats speed by 2.5%
+LevelForSearchEnginesDetection=2    # 0 disables Search engines detection.
+                                    # 2 reduces AWStats speed by 9%
+LevelForKeywordsDetection=2         # 0 disables Keyphrases/Keywords detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForFileTypesDetection=2        # 0 disables File types detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForWormsDetection=0            # 0 disables Worms detection.
+                                    # 2 reduces AWStats speed by 15%
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When you use AWStats as a CGI, you can have the reports shown in HTML frames.
+# Frames are only available for report viewed dynamically. When you build
+# pages from command line, this option is not used and no frames are built.
+# Possible values: 0 or 1
+# Default: 1
+#
+UseFramesWhenCGI=1
+
+
+# This parameter asks your browser to open detailed reports into a different
+# window than the main page.
+# Possible values:
+# 0 - Open all in same browser window
+# 1 - Open detailed reports in another window except if using frames
+# 2 - Open always in a different window even if reports are framed
+# Default: 1
+#
+DetailedReportsOnNewWindows=1
+
+
+# You can add, in the HTML report page, a cache lifetime (in seconds) that
+# will be returned to the browser in HTTP header answer by server.
+# This parameter is not used when reports are built with -staticlinks option.
+# Example: 3600
+# Default: 0
+#
+Expires=3600
+
+
+# To avoid too large web pages, you can ask AWStats to limit number of rows of
+# all reported charts to this number when no other limits apply.
+# Default: 1000
+#
+MaxRowsInHTMLOutput=1000
+
+
+# Set your primary language (ISO-639-1 language codes).
+# Possible values:
+#  Albanian=al, Bosnian=ba, Bulgarian=bg, Catalan=ca,
+#  Chinese (Taiwan)=tw, Chinese (Simpliefied)=cn, Croatian=hr, Czech=cz,
+#  Danish=dk, Dutch=nl, English=en, Estonian=et, Euskara=eu, Finnish=fi,
+#  French=fr, Galician=gl, German=de, Greek=gr, Hebrew=he, Hungarian=hu,
+#  Icelandic=is, Indonesian=id, Italian=it, Japanese=jp, Korean=ko,
+#  Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl,
+#  Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru,
+#  Serbian=sr, Slovak=sk, Slovenian=si, Spanish=es, Swedish=se, Turkish=tr,
+#  Ukrainian=ua, Welsh=cy.
+#  First available language accepted by browser=auto
+# Default: "auto"
+#
+Lang="auto"
+
+
+# Set the location of language files.
+# Example: "/usr/share/awstats/lang"
+# Default: "./lang" (means lang directory is in same location than awstats.pl)
+#
+DirLang="./lang"
+
+
+# Show menu header with reports' links
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowMenu=1					
+
+
+# You choose here which reports you want to see in the main page and what you
+# want to see in those reports.
+# Possible values:
+#  0  - Report is not shown at all
+#  1  - Report is shown in main page with an entry in menu and default columns
+# XYZ - Report shows column informations defined by code X,Y,Z...
+#       X,Y,Z... are code letters among the following:
+#        U = Unique visitors
+#        V = Visits
+#        P = Number of pages
+#        H = Number of hits (or mails)
+#        B = Bandwith (or total mail size for mail logs)
+#        L = Last access date
+#        E = Entry pages
+#        X = Exit pages
+#        C = Web compression (mod_gzip,mod_deflate)
+#        M = Average mail size (mail logs)
+#
+
+# Show monthly summary
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowSummary=UVPHB
+
+# Show monthly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowMonthStats=UVPHB
+
+# Show days of month chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: VPHB, Possible column codes: VPHB
+ShowDaysOfMonthStats=VPHB
+
+# Show days of week chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDaysOfWeekStats=PHB
+
+# Show hourly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowHoursStats=PHB
+
+# Show domains/country chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDomainsStats=PHB
+
+# Show hosts chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHBL, Possible column codes: PHBL
+ShowHostsStats=PHBL
+
+# Show authenticated users chart
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHBL
+ShowAuthenticatedUsers=0
+
+# Show robots chart
+# Context: Web, Streaming
+# Default: HBL, Possible column codes: HBL
+ShowRobotsStats=HBL
+
+# Show worms chart
+# Context: Web, Streaming
+# Default: 0 (If set to other than 0, see also LevelForWormsDetection), Possible column codes: HBL
+ShowWormsStats=0
+
+# Show email senders chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailSenders=0
+
+# Show email receivers chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailReceivers=0
+
+# Show session chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowSessionsStats=1
+
+# Show pages-url chart.
+# Context: Web, Streaming, Ftp
+# Default: PBEX, Possible column codes: PBEX
+ShowPagesStats=PBEX
+
+# Show file types chart.
+# Context: Web, Streaming, Ftp
+# Default: HB, Possible column codes: HBC
+ShowFileTypesStats=HB
+
+# Show file size chart (Not yet available)
+# Context: Web, Streaming, Mail, Ftp
+# Default: 1, Possible column codes: None
+ShowFileSizesStats=0		
+
+# Show operating systems chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowOSStats=1
+
+# Show browsers chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowBrowsersStats=1
+
+# Show screen size chart
+# Context: Web, Streaming
+# Default: 0 (If set to 1, see also MiscTrackerUrl), Possible column codes: None
+ShowScreenSizeStats=0
+
+# Show origin chart
+# Context: Web, Streaming
+# Default: PH, Possible column codes: PH
+ShowOriginStats=PH
+
+# Show keyphrases chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeyphrasesStats=1
+
+# Show keywords chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeywordsStats=1
+
+# Show misc chart
+# Context: Web, Streaming
+# Default: a (See also MiscTrackerUrl parameter), Possible column codes: anjdfrqwp
+ShowMiscStats=a
+
+# Show http errors chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowHTTPErrorsStats=1
+
+# Show smtp errors chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: None
+ShowSMTPErrorsStats=0
+
+# Show the cluster report (Your LogFormat must contains the %cluster tag)
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHB
+ShowClusterStats=0
+
+
+# Some graphical reports are followed by the data array of values.
+# If you don't want this array (to reduce the report size for example), you
+# can set thoose options to 0.
+# Possible values: 0 or 1
+# Default: 1
+#
+# Data array values for the ShowMonthStats report
+AddDataArrayMonthStats=1
+# Data array values for the ShowDaysOfMonthStats report
+AddDataArrayShowDaysOfMonthStats=1
+# Data array values for the ShowDaysOfWeekStats report
+AddDataArrayShowDaysOfWeekStats=1
+# Data array values for the ShowHoursStats report
+AddDataArrayShowHoursStats=1
+
+
+# In the Origin chart, you have stats on where your hits came from. You can
+# include hits on pages that come from pages of same sites in this chart.
+# Possible values: 0 or 1
+# Default: 0
+#
+IncludeInternalLinksInOriginSection=0
+
+
+# The following parameters can be used to choose the maximum number of lines
+# shown for the particular following reports.
+#
+# Stats by countries/domains
+MaxNbOfDomain = 10
+MinHitDomain  = 1
+# Stats by hosts
+MaxNbOfHostsShown = 10
+MinHitHost    = 1
+# Stats by authenticated users
+MaxNbOfLoginShown = 10
+MinHitLogin   = 1
+# Stats by robots
+MaxNbOfRobotShown = 10
+MinHitRobot   = 1
+# Stats by pages
+MaxNbOfPageShown = 10
+MinHitFile    = 1
+# Stats by OS
+MaxNbOfOsShown = 10
+MinHitOs      = 1
+# Stats by browsers
+MaxNbOfBrowsersShown = 10
+MinHitBrowser = 1
+# Stats by screen size
+MaxNbOfScreenSizesShown = 5
+MinHitScreenSize = 1
+# Stats by window size (following 2 parameters are not yet used)
+MaxNbOfWindowSizesShown = 5
+MinHitWindowSize = 1
+# Stats by referers
+MaxNbOfRefererShown = 10
+MinHitRefer   = 1
+# Stats for keyphrases
+MaxNbOfKeyphrasesShown = 10
+MinHitKeyphrase = 1
+# Stats for keywords
+MaxNbOfKeywordsShown = 10
+MinHitKeyword = 1
+# Stats for sender or receiver emails
+MaxNbOfEMailsShown = 20
+MinHitEMail   = 1
+
+
+# Choose if you want the week report to start on sunday or monday
+# Possible values:
+# 0 - Week starts on sunday
+# 1 - Week starts on monday
+# Default: 1
+#
+FirstDayOfWeek=1
+
+
+# List of visible flags that link to other language translations.
+# See Lang parameter for list of allowed flag/language codes.
+# If you don't want any flag link, set ShowFlagLinks to "".
+# This parameter is used only if ShowMenu parameter is set to 1.
+# Possible values: "" or "language_codes_separated_by_space"
+# Example: "en es fr nl de"
+# Default: ""
+#
+ShowFlagLinks=""
+
+
+# Each URL, shown in stats report views, are links you can click.
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowLinksOnUrl=1
+
+
+# When AWStats builds HTML links in its report pages, it starts those links
+# with "http://". However some links might be HTTPS links, so you can enter
+# here the root of all your HTTPS links. If all your site is a SSL web site,
+# just enter "/".
+# This parameter is not used if ShowLinksOnUrl is 0.
+# Example: "/shopping"
+# Example: "/"
+# Default: ""
+#
+UseHTTPSLinkForUrl=""
+
+
+# Maximum length of URL part shown on stats page (number of characters).
+# This affects only URL visible text, links still work.
+# Default: 64
+#
+MaxLengthOfShownURL=64
+
+
+# You can enter HTML code that will be added at the top of AWStats reports.
+# Default: ""
+#
+HTMLHeadSection=""
+
+
+# You can enter HTML code that will be added at the end of AWStats reports.
+# Great to add advert ban.
+# Default: ""
+#
+HTMLEndSection=""
+
+
+# You can set Logo and LogoLink to use your own logo.
+# Logo must be the name of image file (must be in $DirIcons/other directory).
+# LogoLink is the expected URL when clicking on Logo.
+# Default: "awstats_logo6.png"
+#
+Logo="awstats_logo6.png"
+LogoLink="http://awstats.sourceforge.net"
+
+
+# Value of maximum bar width/height for horizontal/vertical HTML graphics bars.
+# Default: 260/90
+#
+BarWidth   = 260
+BarHeight  = 90
+
+
+# You can ask AWStats to use a particular CSS (Cascading Style Sheet) to
+# change its look. To create a style sheet, you can use samples provided with
+# AWStats in wwwroot/css directory.
+# Example: "/awstatscss/awstats_bw.css"
+# Example: "/css/awstats_bw.css"
+# Default: ""
+#
+StyleSheet=""
+
+
+# Those color parameters can be used (if StyleSheet parameter is not used)
+# to change AWStats look.
+# Example: color_name="RRGGBB"	# RRGGBB is Red Green Blue components in Hex
+#
+color_Background="FFFFFF"		# Background color for main page (Default = "FFFFFF")
+color_TableBGTitle="CCCCDD"		# Background color for table title (Default = "CCCCDD")
+color_TableTitle="000000"		# Table title font color (Default = "000000")
+color_TableBG="CCCCDD"			# Background color for table (Default = "CCCCDD")
+color_TableRowTitle="FFFFFF"	# Table row title font color (Default = "FFFFFF")
+color_TableBGRowTitle="ECECEC"	# Background color for row title (Default = "ECECEC")
+color_TableBorder="ECECEC"		# Table border color (Default = "ECECEC")
+color_text="000000"				# Color of text (Default = "000000")
+color_textpercent="606060"		# Color of text for percent values (Default = "606060")
+color_titletext="000000"		# Color of text title within colored Title Rows (Default = "000000")
+color_weekend="EAEAEA"			# Color for week-end days (Default = "EAEAEA")
+color_link="0011BB"				# Color of HTML links (Default = "0011BB")
+color_hover="605040"			# Color of HTML on-mouseover links (Default = "605040") 
+color_u="FFAA66"				# Background color for number of unique visitors (Default = "FFAA66")
+color_v="F4F090"				# Background color for number of visites (Default = "F4F090")
+color_p="4477DD"				# Background color for number of pages (Default = "4477DD")
+color_h="66DDEE"				# Background color for number of hits (Default = "66DDEE")
+color_k="2EA495"				# Background color for number of bytes (Default = "2EA495")
+color_s="8888DD"				# Background color for number of search (Default = "8888DD")
+color_e="CEC2E8"				# Background color for number of entry pages (Default = "CEC2E8")
+color_x="C1B2E2"				# Background color for number of exit pages (Default = "C1B2E2")
+
+
+
+#-----------------------------------------------------------------------------
+# PLUGINS
+#-----------------------------------------------------------------------------
+
+# Add here all plugin files you want to load.
+# Plugin files must be .pm files stored in 'plugins' directory.
+# Uncomment LoadPlugin lines to enable a plugin after checking that perl
+# modules required by the plugin are installed.
+
+# Plugin: Tooltips
+# Perl modules required: None
+# Add some tooltips help on HTML report pages.
+# Note that enabling this kind of help will increased HTML report pages size,
+# so server load and bandwidth.
+#
+LoadPlugin="tooltips"
+
+# Plugin: DecodeUTFKeys
+# Perl modules required: Encode and URI::Escape
+# Allow AWStats to show correctly (in language charset) keywords/keyphrases
+# strings even if they were UTF8 coded by the referer search engine.
+#
+#LoadPlugin="decodeutfkeys"
+
+# Plugin: IPv6
+# Perl modules required: Net::IP and Net::DNS
+# This plugin gives AWStats capability to make reverse DNS lookup on IPv6
+# addresses.
+# Note: If you are interested in having country report, you should use the
+# geoipfree or geoip plugin instead of enabled reverse DNS lookup.
+#
+#LoadPlugin="ipv6"
+
+# Plugin: HashFiles
+# Perl modules required: Storable
+# AWStats DNS cache files are read/saved as native hash files. This increases
+# DNS cache files loading speed, above all for very large web sites.
+#
+LoadPlugin="hashfiles"
+
+# Plugin: GeoIP
+# Perl modules required: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IP module 
+# from Maxmind, database more up to date) or the GeoIPfree plugin (need
+# Perl Geo::IPfree module, database less up to date).
+# This plugin reduces AWStats speed of 8% !
+#
+LoadPlugin="geoip GEOIP_STANDARD /usr/share/GeoIP/GeoIP.dat"
+
+# Plugin: GeoIPfree
+# Perl modules required: Geo::IPfree version 0.2+ (from Graciliano M.P.)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IPfree
+# module, database less up to date) or the GeoIP plugin (need Perl Geo::IP
+# module from Maxmind, database more up to date).
+# Note: Activestate provide a corrupted version of Geo::IPfree 0.2 Perl
+# module, so install it from elsewhere (from www.cpan.org for example).
+# This plugin reduces AWStats speed of 10% !
+#
+#LoadPlugin="geoipfree"
+
+# Plugin: GeoIP_Region_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by regions. Only regions for US and 
+# Canada can be detected.
+# Note: This plugin need Maxmind GeoIP Perl module AND the region database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Region database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_region_maxmind GEOIP_STANDARD /pathto/GeoIPRegion.dat"
+
+# Plugin: GeoIP_City_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by cities (with country and regions
+# informations for major countries).
+# Note: This plugin need Maxmind GeoIP Perl module AND the city database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the City database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /pathto/GeoIPCity.dat"
+
+# Plugin: GeoIP_ISP_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by ISP.
+# Note: This plugin need Maxmind GeoIP Perl module AND the ISP database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the ISP database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_isp_maxmind GEOIP_STANDARD /pathto/GeoIPISP.dat"
+
+# Plugin: GeoIP_Org_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by Organization name
+# Note: This plugin need Maxmind GeoIP Perl module AND the Org database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Org database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_org_maxmind GEOIP_STANDARD /pathto/GeoIPOrg.dat"
+
+# Plugin: UserInfo
+# Perl modules required: None
+# Add a text (Firtname, Lastname, Office Department, ...) in authenticated user
+# reports for each login value.
+# A text file called userinfo.myconfig.txt, with two fields (first is login,
+# second is text to show, separated by a tab char) must be created in DirData
+# directory.
+#
+#LoadPlugin="userinfo"
+
+# Plugin: HostInfo
+# Perl modules required: Net::XWhois
+# Add a column into host chart with a link to open a popup window that shows
+# info on host (like whois records).
+#
+#LoadPlugin="hostinfo"
+
+# Plugin: ClusterInfo
+# Perl modules required: None
+# Add a text (for example a full hostname) in cluster reports for each cluster
+# number.
+# A text file called clusterinfo.myconfig.txt, with two fields (first is
+# cluster number, second is text to show) separated by a tab char. must be
+# created into DirData directory.
+# Note this plugin is useless if ShowClusterStats is set to 0 or if you don't
+# use a personalized log format that contains %cluster tag.
+#
+#LoadPlugin="clusterinfo"
+
+# Plugin: UrlAliases
+# Perl modules required: None
+# Add a text (Page title, description...) in URL reports before URL value.
+# A text file called urlalias.myconfig.txt, with two fields (first is URL,
+# second is text to show, separated by a tab char) must be created into
+# DirData directory.
+#
+#LoadPlugin="urlalias"
+
+# Plugin: TimeHiRes
+# Perl modules required: Time::HiRes (if Perl < 5.8)
+# Time reported by -showsteps option is in millisecond. For debug purpose.
+#
+#LoadPlugin="timehires"		
+
+# Plugin: TimeZone
+# Perl modules required: Time::Local
+# Allow AWStats to correct a bad timezone for user of some IIS that use
+# GMT date in its log instead of local server time.
+# This module is useless for Apache and most IIS version.
+# This plugin reduces AWStats speed of 40% !!!!!!!
+#
+#LoadPlugin="timezone +2"
+
+# Plugin: Rawlog
+# Perl modules required: None
+# This plugin adds a form in AWStats main page to allow users to see raw
+# content of current log files. A filter is also available.
+#
+#LoadPlugin="rawlog"
+
+# Plugin: GraphApplet
+# Perl modules required: None
+# Supported charts are built by a 3D graphic applet.
+#
+#LoadPlugin="graphapplet /awstatsclasses"				# EXPERIMENTAL FEATURE
+
+
+
+#-----------------------------------------------------------------------------
+# EXTRA SECTIONS
+#-----------------------------------------------------------------------------
+
+# You can define your own charts, you choose here what are rows and columns
+# keys. This feature is particularly useful for marketing purpose, tracking
+# products orders for example.
+# For this, edit all parameters of Extra section. Each set of parameter is a
+# different chart. For several charts, duplicate section changing the number.
+# Note: Each Extra section reduces AWStats speed by 8%.
+#
+# WARNING: A wrong setup of Extra section might result in too large arrays
+# that will consume all your memory, making AWStats unusable after several
+# updates, so be sure to setup it correctly.
+# In most cases, you don't need this feature.
+#
+# ExtraSectionNameX is title of your personalized chart.
+# ExtraSectionCodeFilterX is list of codes the record code field must match.
+#   Put an empty string for no test on code.
+# ExtraSectionConditionX are conditions you can use to count or not the hit,
+#   Use one of the field condition
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,extraX)
+#   and a regex to match, after a coma. Use "||" for "OR".
+# ExtraSectionFirstColumnTitleX is the first column title of the chart.
+# ExtraSectionFirstColumnValuesX is a string to tell AWStats which field to
+#   extract value from
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,VHOST,extraX)
+#   and how to extract the value (using regex syntax). Each different value
+#   found will appear in first column of report on a different row. Be sure
+#   that list of different possible values will not grow indefinitely.
+# ExtraSectionFirstColumnFormatX is the string used to write value.
+# ExtraSectionStatTypesX are things you want to count. You can use standard
+#   code letters (P for pages,H for hits,B for bandwidth,L for last access).
+# ExtraSectionAddAverageRowX add a row at bottom of chart with average values.
+# ExtraSectionAddSumRowX add a row at bottom of chart with sum values.
+# MaxNbOfExtraX is maximum number of rows shown in chart.
+# MinHitExtraX is minimum number of hits required to be shown in chart.
+#
+
+# Example to report the 20 products the most ordered by "order.cgi" script
+#ExtraSectionName1="Product orders"
+#ExtraSectionCodeFilter1="200 304"
+#ExtraSectionCondition1="URL,\/cgi\-bin\/order\.cgi||URL,\/cgi\-bin\/order2\.cgi"
+#ExtraSectionFirstColumnTitle1="Product ID"
+#ExtraSectionFirstColumnValues1="QUERY_STRING,productid=([^&]+)"
+#ExtraSectionFirstColumnFormat1="%s"
+#ExtraSectionStatTypes1=PL
+#ExtraSectionAddAverageRow1=0
+#ExtraSectionAddSumRow1=1
+#MaxNbOfExtra1=20
+#MinHitExtra1=1
+
+
+# There is also a global parameter ExtraTrackedRowsLimit that limits the
+# number of possible rows an ExtraSection can report. This parameter is
+# here to protect too much memory use when you make a bad setup in your
+# ExtraSection. It applies to all ExtraSection independently meaning that
+# none ExtraSection can report more rows than value defined by ExtraTrackedRowsLimit.
+# If you know an ExtraSection will report more rows than its value, you should
+# increase this parameter or AWStats will stop with an error.
+# Example: 2000
+# Default: 500
+#
+ExtraTrackedRowsLimit=500
+
+
+#-----------------------------------------------------------------------------
+# INCLUDES
+#-----------------------------------------------------------------------------
+
+# You can include other config files using the directive with the name of the
+# config file.
+# This is particularly useful for users who have a lot of virtual servers, so
+# a lot of config files and want to maintain common values in only one file.
+# Note that when a variable is defined both in a config file and in an
+# included file, AWStats will use the last value read for parameters that
+# contains one value and AWStats will concat all values from both files for
+# parameters that are lists of values.
+#
+
+#Include ""
+
diff --git a/modules/awstats/manifests/init.pp b/modules/awstats/manifests/init.pp
index d9733b8..676175a 100644
--- a/modules/awstats/manifests/init.pp
+++ b/modules/awstats/manifests/init.pp
@@ -41,6 +41,10 @@ class awstats::base {
         source => 'puppet:///awstats/awstats.translate.fedoraproject.org.conf',
     }
 
+    file { '/etc/awstats/awstats.koji.fedoraproject.org.conf':
+        source => 'puppet:///awstats/koji.fedoraproject.org.conf',
+    }
+
     file { '/etc/awstats/awstats.fedorahosted.org.conf':
         source => 'puppet:///awstats/awstats.fedorahosted.org.conf',
     }

commit f5a328bbfe10a2c811753e0495f6f09009c48525
Author: Ricky Zhou <[email-masked]>
Date:   Sat Jul 19 01:32:29 2008 +0000

    Add fedorahosted.org.

diff --git a/modules/awstats/files/awstats.cron b/modules/awstats/files/awstats.cron
index 0c011b0..9b76c3f 100755
--- a/modules/awstats/files/awstats.cron
+++ b/modules/awstats/files/awstats.cron
@@ -24,3 +24,8 @@ ln -sf /var/www/html/awstats/download.fedoraproject.org/awstats.download.fedorap
 mkdir -p /var/www/html/awstats/translate.fedoraproject.org
 /usr/share/awstats/tools/awstats_buildstaticpages.pl -config=translate.fedoraproject.org -update -dir=/var/www/html/awstats/translate.fedoraproject.org > /dev/null
 ln -sf /var/www/html/awstats/translate.fedoraproject.org/awstats.translate.fedoraproject.org.html  /var/www/html/awstats/translate.fedoraproject.org/index.html
+
+# fedorahosted.org
+mkdir -p /var/www/html/awstats/fedorahosted.org
+/usr/share/awstats/tools/awstats_buildstaticpages.pl -config=fedorahosted.org -update -dir=/var/www/html/awstats/fedorahosted.org > /dev/null
+ln -sf /var/www/html/awstats/fedorahosted.org/awstats.fedorahosted.org.html  /var/www/html/awstats/fedorahosted.org/index.html
diff --git a/modules/awstats/files/awstats.fedorahosted.org.conf b/modules/awstats/files/awstats.fedorahosted.org.conf
new file mode 100644
index 0000000..8741bde
--- /dev/null
+++ b/modules/awstats/files/awstats.fedorahosted.org.conf
@@ -0,0 +1,1499 @@
+# AWSTATS CONFIGURE FILE 6.6
+#-----------------------------------------------------------------------------
+# Copy this file into awstats.www.mydomain.conf and edit this new config file
+# to setup AWStats (See documentation in docs/ directory).
+# The config file must be in /etc/awstats, /usr/local/etc/awstats or /etc (for
+# Unix/Linux) or same directory than awstats.pl (Windows, Mac, Unix/Linux...)
+# To include an environment variable in any parameter (AWStats will replace
+# it with its value when reading it), follow the example:
+# Parameter="__ENVNAME__"
+# Note that environment variable AWSTATS_CURRENT_CONFIG is always defined with
+# the config value in an AWStats running session and can be used like others.
+#-----------------------------------------------------------------------------
+# $Revision: 1.327 $ - $Author: eldy $ - $Date: 2006/04/21 22:28:49 $
+
+
+
+#-----------------------------------------------------------------------------
+# MAIN SETUP SECTION (Required to make AWStats work)
+#-----------------------------------------------------------------------------
+
+# "LogFile" contains the web, ftp or mail server log file to analyze.
+# Possible values: A full path, or a relative path from awstats.pl directory.
+# Example: "/var/log/apache/access.log"
+# Example: "../logs/mycombinedlog.log"
+# You can also use tags in this filename if you need a dynamic file name
+# depending on date or time (Replacement is made by AWStats at the beginning
+# of its execution). This is available tags :
+#   %YYYY-n  is replaced with 4 digits year we were n hours ago
+#   %YY-n    is replaced with 2 digits year we were n hours ago
+#   %MM-n    is replaced with 2 digits month we were n hours ago
+#   %MO-n    is replaced with 3 letters month we were n hours ago
+#   %DD-n    is replaced with day we were n hours ago
+#   %HH-n    is replaced with hour we were n hours ago
+#   %NS-n    is replaced with number of seconds at 00:00 since 1970
+#   %WM-n    is replaced with the week number in month (1-5)
+#   %Wm-n    is replaced with the week number in month (0-4)
+#   %WY-n    is replaced with the week number in year (01-52)
+#   %Wy-n    is replaced with the week number in year (00-51)
+#   %DW-n    is replaced with the day number in week (1-7, 1=sunday)
+#                              use n=24 if you need (1-7, 1=monday)
+#   %Dw-n    is replaced with the day number in week (0-6, 0=sunday)
+#                              use n=24 if you need (0-6, 0=monday)
+#   Use 0 for n if you need current year, month, day, hour...
+# Example: "/var/log/access_log.%YYYY-0%MM-0%DD-0.log"
+# Example: "C:/WINNT/system32/LogFiles/W3SVC1/ex%YY-24%MM-24%DD-24.log"
+# You can also use a pipe if log file come from a pipe :
+# Example: "gzip -d </var/log/apache/access.log.gz |"
+# If there are several log files from load balancing servers :
+# Example: "/pathtotools/logresolvemerge.pl *.log |"
+#
+LogFile="/usr/share/awstats/tools/logresolvemerge.pl /var/log/hosts/192.168.1.17/*/*/*/http/fedorahosted.org-access.log | sed -e 's/^ //' |"
+
+
+# Enter the log file type you want to analyze.
+# Possible values:
+#  W - For a web log file
+#  S - For a streaming log file
+#  M - For a mail log file
+#  F - For a ftp log file
+# Example: W
+# Default: W
+#
+LogType=W
+
+
+# Enter here your log format (Must match your web server config. See setup
+# instructions in documentation to know how to configure your web server to
+# have the required log format).
+# Possible values: 1,2,3,4 or "your_own_personalized_log_format"
+# 1 - Apache or Lotus Notes/Domino native combined log format (NCSA combined/XLF/ELF log format)
+# 2 - IIS or ISA format (IIS W3C log format). See FAQ-COM115 For ISA.
+# 3 - Webstar native log format.
+# 4 - Apache or Squid native common log format (NCSA common/CLF log format)
+#     With LogFormat=4, some features (browsers, os, keywords...) can't work.
+# "your_own_personalized_log_format" = If your log is ftp, mail or other format,
+#     you must use following keys to define the log format string (See FAQ for
+#     ftp, mail or exotic web log format examples):
+#   %host             Client hostname or IP address (or Sender host for mail log)
+#   %host_r           Receiver hostname or IP address (for mail log)
+#   %lognamequot      Authenticated login/user with format: "john"
+#   %logname          Authenticated login/user with format: john
+#   %time1            Date and time with format: [dd/mon/yyyy:hh:mm:ss +0000] or [dd/mon/yyyy:hh:mm:ss]
+#   %time2            Date and time with format: yyyy-mm-dd hh:mm:ss
+#   %time3            Date and time with format: Mon dd hh:mm:ss or Mon dd hh:mm:ss yyyy
+#   %time4            Date and time with unix timestamp format: dddddddddd
+#   %methodurl        Method and URL with format: "GET /index.html HTTP/x.x"
+#   %methodurlnoprot  Method and URL with format: "GET /index.html"
+#   %method           Method with format: GET
+#   %url              URL only with format: /index.html
+#   %query            Query string (used by URLWithQuery option)
+#   %code             Return code status (with format for web log: 999)
+#   %bytesd           Size of document in bytes
+#   %refererquot      Referer page with format: "http://from.com/from.htm"
+#   %referer          Referer page with format: http://from.com/from.htm
+#   %uabracket        User agent with format: [Mozilla/4.0 (compatible, ...)]
+#   %uaquot           User agent with format: "Mozilla/4.0 (compatible, ...)"
+#   %ua               User agent with format: Mozilla/4.0_(compatible...)
+#   %gzipin           mod_gzip compression input bytes: In:XXX
+#   %gzipout          mod_gzip compression output bytes & ratio: Out:YYY:ZZpct.
+#   %gzipratio        mod_gzip compression ratio: ZZpct.
+#   %deflateratio     mod_deflate compression ratio with format: (ZZ)
+#   %email            EMail sender (for mail log)
+#   %email_r          EMail receiver (for mail log)
+#   %virtualname      Web sever virtual hostname. Use this tag when same log
+#                     contains data of several virtual web servers. AWStats
+#                     will discard records not in SiteDomain nor HostAliases
+#   %cluster          If log file is provided from several computers (merged by
+#                     logresolvemerge.pl), use this to define cluster id field.
+#   %extraX           Another field that you plan to use for building a
+#                     personalized report with ExtraSection feature (See later).
+#   If your log format has some fields not included in this list, use:
+#   %other            Means another not used field
+#   %otherquot        Means another not used double quoted field
+#
+# Examples for Apache combined logs (following two examples are equivalent):
+# LogFormat = 1
+# LogFormat = "%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot"
+#
+# Example for IIS:
+# LogFormat = 2
+#
+LogFormat = 1
+
+
+# If your log field's separator is not a space, you can change this parameter.
+# This parameter is not used if LogFormat is a predefined value (1,2,3,4)
+# Backslash can be used as escape character.
+# Example: " "
+# Example: "\t"
+# Example: "\|"
+# Example: ","
+# Default: " "
+#
+LogSeparator=" "
+
+
+# "SiteDomain" must contain the main domain name, or the main intranet web
+# server name, used to reach the web site.
+# If you share the same log file for several virtual web servers, this
+# parameter is used to tell AWStats to filter record that contains records for
+# this virtual host name only (So check that this virtual hostname can be
+# found in your log file and use a personalized log format that include the
+# %virtualname tag).
+# But for multi hosting a better solution is to have one log file for each
+# virtual web server. In this case, this parameter is only used to generate
+# full URL's links when ShowLinksOnUrl option is set to 1.
+# If analyzing mail log, enter here the domain name of mail server.
+# Example: "myintranetserver"
+# Example: "www.domain.com"
+# Example: "ftp.domain.com"
+# Example: "domain.com"
+#
+SiteDomain="fedorahosted.org"
+
+
+# Enter here all other possible domain names, addresses or virtual host
+# aliases someone can use to access your site. Try to keep only the minimum
+# number of possible names/addresses to have the best performances.
+# You can repeat the "SiteDomain" value in this list.
+# This parameter is used to analyze referer field in log file and to help
+# AWStats to know if a referer URL is a local URL of same site or an URL of
+# another site.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Note: You can also use @/mypath/myfile if list of aliases are in a file.
+# Example: "www.myserver.com localhost 127.0.0.1 REGEX[mydomain\.(net|org)$]"
+#
+HostAliases="REGEX[.*\.fedorahosted\.org]"
+
+
+# If you want to have hosts reported by name instead of ip address, AWStats
+# need to make reverse DNS lookups (if not already done in your log file).
+# With DNSLookup to 0, all hosts will be reported by their IP addresses and
+# not by the full hostname of visitors (except if names are already available
+# in log file).
+# If you want/need to set DNSLookup to 1, don't forget that this will reduce
+# dramatically AWStats update process speed. Do not use on large web sites.
+# Note: Reverse DNS lookup is done on IPv4 only (Enable ipv6 plugin for IPv6).
+# Note: Result of DNS Lookup can be used to build the Country report. However
+# it is highly recommanded to enable the plugin 'geoipfree' or 'geoip' to
+# have an accurate Country report with no need of DNS Lookup.
+# Possible values:
+# 0 - No DNS Lookup
+# 1 - DNS Lookup is fully enabled
+# 2 - DNS Lookup is made only from static DNS cache file (if it exists)
+# Default: 2
+# 
+DNSLookup=2
+
+
+# When AWStats updates its statistics, it stores results of its analysis in 
+# files (AWStats database). All those files are written in the directory
+# defined by the "DirData" parameter. Set this value to the directory where
+# you want AWStats to save its database and working files into.
+# Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser"
+# feature (see later), you need "Write" permissions by web server user on this
+# directory (and "Modify" for Windows NTFS file systems).
+# Example: "/var/lib/awstats"
+# Example: "../data"
+# Example: "C:/awstats_data_dir"
+# Default: "."          (means same directory as awstats.pl)
+#
+DirData="/var/lib/awstats"
+
+
+# Relative or absolute web URL of your awstats cgi-bin directory.
+# This parameter is used only when AWStats is run from command line
+# with -output option (to generate links in HTML reported page).
+# Example: "/awstats"
+# Default: "/cgi-bin"   (means awstats.pl is in "/yourwwwroot/cgi-bin")
+#
+DirCgi="/awstats"
+
+
+# Relative or absolute web URL of your awstats icon directory.
+# If you build static reports ("... -output > outputpath/output.html"), enter
+# path of icon directory relative to the output directory 'outputpath'.
+# Example: "/awstatsicons"
+# Example: "../icon"
+# Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon")
+#
+DirIcons="/awstatsicons"
+
+
+# When this parameter is set to 1, AWStats adds a button on report page to
+# allow to "update" statistics from a web browser. Warning, when "update" is
+# made from a browser, AWStats is run as a CGI by the web server user defined
+# in your web server (user "nobody" by default with Apache, "IUSR_XXX" with
+# IIS), so the "DirData" directory and all already existing history files
+# awstatsMMYYYY[.xxx].txt must be writable by this user. Change permissions if
+# necessary to "Read/Write" (and "Modify" for Windows NTFS file systems).
+# Warning: Update process can be long so you might experience "time out"
+# browser errors if you don't launch AWStats frequently enough.
+# When set to 0, update is only made when AWStats is run from the command
+# line interface (or a task scheduler).
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowToUpdateStatsFromBrowser=0
+
+
+# AWStats saves and sorts its database on a month basis (except if using
+# databasebreak option from command line). 
+# However, if you choose the -month=all from command line or
+# value '-Year-' from CGI combo form to have a report for all year, AWStats
+# needs to reload all data for full year (each month), and sort them,
+# requiring a large amount of time, memory and CPU. This might be a problem
+# for web hosting providers that offer AWStats for large sites, on shared
+# servers, to non CPU cautious customers.
+# For this reason, the 'full year' is only enabled on Command Line by default.
+# You can change this by setting this parameter to 0, 1, 2 or 3.
+# Possible values:
+#  0 - Never allowed
+#  1 - Allowed on CLI only, -Year- value in combo is not visible
+#  2 - Allowed on CLI only, -Year- value in combo is visible but not allowed
+#  3 - Possible on CLI and CGI
+# Default: 2
+#
+AllowFullYearView=2
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When the update process runs, AWStats can set a lock file in TEMP or TMP
+# directory. This lock is to avoid to have 2 update processes running at the
+# same time to prevent unknown conflicts problems and avoid DoS attacks when
+# AllowToUpdateStatsFromBrowser is set to 1.
+# Because, when you use lock file, you can experience sometimes problems in
+# lock file not correctly removed (killed process for example requires that
+# you remove the file manualy), this option is not enabled by default (Do
+# not enable this option with no console server access).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+EnableLockForUpdate=1
+
+
+# AWStats can do reverse DNS lookups through a static DNS cache file that was
+# previously created manually. If no path is given in static DNS cache file
+# name, AWStats will search DirData directory. This file is never changed.
+# This option is not used if DNSLookup=0.
+# Note: DNS cache file format is 'minsince1970 ipaddress resolved_hostname'
+# or just 'ipaddress resolved_hostname'
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscache"
+# Default: "dnscache.txt"
+#
+DNSStaticCacheFile="dnscache.txt"
+
+
+# AWStats can do reverse DNS lookups through a DNS cache file that was created
+# by a previous run of AWStats. This file is erased and recreated after each
+# statistics update process. You don't need to create and/or edit it.
+# AWStats will read and save this file in DirData directory.
+# This option is used only if DNSLookup=1.
+# Note: If a DNSStaticCacheFile is available, AWStats will check for DNS
+# lookup in DNSLastUpdateCacheFile after checking into DNSStaticCacheFile.
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscachelastupdate"
+# Default: "dnscachelastupdate.txt"
+#
+DNSLastUpdateCacheFile="dnscachelastupdate.txt"
+
+
+# You can specify specific IP addresses that should NOT be looked up in DNS.
+# This option is used only if DNSLookup=1.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "123.123.123.123 REGEX[^192\.168\.]"
+# Default: ""
+#
+SkipDNSLookupFor=""
+
+
+# The following two parameters allow you to protect a config file from being
+# read by AWStats when called from a browser if web user has not been
+# authenticated. Your AWStats program must be in a web protected "realm" (With
+# Apache, you can use .htaccess files to do so. With other web servers, see
+# your server setup manual).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowAccessFromWebToAuthenticatedUsersOnly=0
+
+
+# This parameter gives the list of all authorized authenticated users to view
+# statistics for this domain/config file. This parameter is used only if
+# AllowAccessFromWebToAuthenticatedUsersOnly is set to 1.
+# Change : Effective immediatly
+# Example: "user1 user2"
+# Example: "__REMOTE_USER__"
+# Default: ""
+#
+AllowAccessFromWebToFollowingAuthenticatedUsers=""
+
+
+# When this parameter is defined to something, the IP address of the user that
+# reads its statistics from a browser (when AWStats is used as a CGI) is
+# checked and must match one of the IP address values or ranges.
+# Change : Effective immediatly
+# Example: "127.0.0.1 123.123.123.1-123.123.123.255"
+# Default: ""
+#
+AllowAccessFromWebToFollowingIPAddresses=""
+
+
+# If the "DirData" directory (see above) does not exist, AWStats return an
+# error. However, you can ask AWStats to create it.
+# This option can be used by some Web Hosting Providers that has defined a 
+# dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and
+# don't want to have to create a new directory each time they add a new user.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+CreateDirDataIfNotExists=0
+
+
+# You can choose in which format the Awstats history database is saved.
+# Note: Using "xml" format make AWStats building database files three times
+# larger than using "text" format.
+# Change : Database format is switched after next update
+# Possible values: text or xml
+# Default: text
+#
+BuildHistoryFormat=text
+
+
+# If you prefer having the report output pages be built as XML compliant pages
+# instead of simple HTML pages, you can set this to 'xhtml' (May not work
+# properly with old browsers).
+# Change : Effective immediatly
+# Possible values: html or xhtml
+# Default: html
+#
+BuildReportFormat=html
+
+
+# AWStats databases can be updated from command line of from a browser (when
+# used as a cgi program). So AWStats database files need write permission
+# for both command line user and default web server user (nobody for Unix,
+# IUSR_xxx for IIS/Windows,...).
+# To avoid permission problems between update process (run by an admin user)
+# and CGI process (ran by a low level user), AWStats can save its database 
+# files with read and write permissions for everyone.
+# By default, AWStats keeps default user permissions on updated files. If you 
+# set AllowToUpdateStatsFromBrowser to 1, you can change this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+SaveDatabaseFilesWithPermissionsForEveryone=0
+
+
+# AWStats can purge log file, after analyzing it. Note that AWStats is able
+# to detect new lines in a log file, to process only them, so you can launch
+# AWStats as often as you want, even with this parameter to 0.
+# With 0, no purge is made, so you must use a scheduled task or a web server
+# that make this purge frequently.
+# With 1, the purge of the log file is made each time AWStats update is run.
+# This parameter doesn't work with IIS (This web server doesn't let its log
+# file to be purged).
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+PurgeLogFile=0
+
+
+# When PurgeLogFile is setup to 1, AWStats will clean your log file after
+# processing it. You can however keep an archive file of all processed log
+# records by setting this parameter (For example if you want to use another
+# log analyzer). The archived log file is saved in "DirData" with name
+# awstats_archive.configname[.suffix].log
+# This parameter is not used if PurgeLogFile=0
+# Change : Effective for new updates only
+# Possible values: 0, 1, or tags (See LogFile parameter) for suffix
+# Example: 1
+# Example: %YYYY%MM%DD
+# Default: 0
+#
+ArchiveLogRecords=0
+
+
+# Each time you run the update process, AWStats overwrites the 'historic file'
+# for the month (awstatsMMYYYY[.*].txt) with the updated one.
+# When write errors occurs (IO, disk full,...), this historic file can be
+# corrupted and must be deleted. Because this file contains information of all
+# past processed log files, you will loose old stats if removed. So you can
+# ask AWStats to save last non corrupted file in a .bak file. This file is
+# stored in "DirData" directory with other 'historic files'.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+KeepBackupOfHistoricFiles=0
+
+
+# Default index page name for your web server.
+# Change : Effective for new updates only
+# Example: "index.php index.html default.html"
+# Default: "index.html"
+#
+DefaultFile="index.html"
+
+
+# Do not include access from clients that match following criteria.
+# If your log file contains IP addresses in host field, you must enter here
+# matching IP addresses criteria.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "SkipHosts" is "OnlyHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Example: "localhost REGEX[^.*\.localdomain$]"
+# Default: ""
+#
+SkipHosts="127.0.0.1"
+
+
+# Do not include access from clients with a user agent that match following
+# criteria. If you want to exclude a robot, you should update the robots.pm
+# file instead of this parameter.
+# The opposite parameter of "SkipUserAgents" is "OnlyUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "konqueror REGEX[ua_test_v\d\.\d]"
+# Default: ""
+#
+SkipUserAgents=""
+
+
+# Use SkipFiles to ignore access to URLs that match one of following entries.
+# You can enter a list of not important URLs (like framed menus, hidden pages,
+# etc...) to exclude them from statistics. You must enter here exact relative
+# URL as found in log file, or a matching REGEX value. Check apply on URL with
+# all its query paramaters.
+# For example, to ignore /badpage.php, just add "/badpage.php". To ignore all
+# pages in a particular directory, add "REGEX[^\/directorytoexclude]".
+# The opposite parameter of "SkipFiles" is "OnlyFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "/badpage.php /page.php?param=x REGEX[^\/excludedirectory]"
+# Default: ""
+#
+SkipFiles=""
+
+
+# Use SkipReferrersBlackList if you want to exclude records coming from a SPAM
+# referrer. Parameter must receive a local file name containing rules applied
+# on referrer field. If parameter is empty, no filter is applied.
+# An example of such a file is available in lib/blacklist.txt
+# You can download updated version at http://www.jayallen.org/comment_spam/
+# Change : Effective for new updates only
+# Example: "/mylibpath/blacklist.txt"
+# Default: ""
+#
+# WARNING!! Using this feature make AWStats running very slower (5 times slower
+# with black list file provided with AWStats !
+#
+SkipReferrersBlackList=""
+
+
+# Include in stats, only accesses from hosts that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular hosts, you can add those host names in
+# this parameter.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "OnlyHosts" is "SkipHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Default: ""
+#
+OnlyHosts=""
+
+
+# Include in stats, only accesses from user agent that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular browsers, you can add their user agents
+# string in this parameter.
+# The opposite parameter of "OnlyUserAgents" is "SkipUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "msie"
+# Default: ""
+#
+OnlyUserAgents=""
+
+
+# Include in stats, only accesses to URLs that match one of following entries.
+# For example, if you want AWStats to filter access to keep only stats that
+# match a particular string, like a particular directory, you can add this
+# directory name in this parameter.
+# The opposite parameter of "OnlyFiles" is "SkipFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "REGEX[marketing_directory] REGEX[office\/.*\.(csv|sxw)$]"
+# Default: ""
+#
+OnlyFiles=""
+
+
+# Add here a list of kind of url (file extension) that must be counted as
+# "Hit only" and not as a "Hit" and "Page/Download". You can set here all
+# image extensions as they are hit downloaded that must be counted but they
+# are not viewed pages. URLs with such extensions are not included in the TOP
+# Pages/URL report.
+# Note: If you want to exclude particular URLs from stats (No Pages and no
+# Hits reported), you must use SkipFiles parameter.
+# Change : Effective for new updates only
+# Example: "css js class gif jpg jpeg png bmp ico zip arj gz z wav mp3 wma mpg"
+# Example: ""
+# Default: "css js class gif jpg jpeg png bmp ico"
+#
+NotPageList="css js class gif jpg jpeg png bmp ico swf"
+
+
+# By default, AWStats considers that records found in web log file are
+# successful hits if HTTP code returned by server is a valid HTTP code (200
+# and 304). Any other code are reported in HTTP status chart.
+# Note that HTTP 'control codes', like redirection (302, 305) are not added by
+# default in this list as they are not pages seen by a visitor but are
+# protocol exchange codes to tell the browser to ask another page. Because
+# this other page will be counted and seen with a 200 or 304 code, if you 
+# add such codes, you will have 2 pages viewed reported for only one in facts.
+# Change : Effective for new updates only
+# Example: "200 304 302 305"
+# Default: "200 304"
+#
+ValidHTTPCodes="200 304"
+
+
+# By default, AWStats considers that records found in mail log file are
+# successful mail transfers if field that represent return code in analyzed
+# log file match values defined by this parameter.
+# Change : Effective for new updates only
+# Example: "1 250 200"
+# Default: "1 250"
+#
+ValidSMTPCodes="1 250"
+
+
+# Some web servers on some Operating systems (IIS-Windows) consider that a
+# login with same value but different case are the same login. To tell AWStats
+# to also consider them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+AuthenticatedUsersNotCaseSensitive=0
+
+
+# Some web servers on some Operating systems (IIS-Windows) considers that two
+# URLs with same value but different case are the same URL. To tell AWStats to
+# also considers them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+URLNotCaseSensitive=0
+
+
+# Keep or remove the anchor string you can find in some URLs.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+URLWithAnchor=0
+
+
+# In URL links, "?" char is used to add parameter's list in URLs. Syntax is:
+# /mypage.html?param1=value1&param2=value2
+# However, some servers/sites use also other chars to isolate dynamic part of
+# their URLs. You can complete this list with all such characters.
+# Change : Effective for new updates only
+# Example: "?;,"
+# Default: "?;"
+#
+URLQuerySeparators="?;"
+
+
+# Keep or remove the query string to the URL in the statistics for individual
+# pages. This is primarily used to differentiate between the URLs of dynamic
+# pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as two
+# different pages.
+# Warning, when set to 1, memory required to run AWStats is dramatically
+# increased if you have a lot of changing URLs (for example URLs with a random
+# id inside). Such web sites should not set this option to 1 or use seriously
+# the next parameter URLWithQueryWithOnlyFollowingParameters (or eventually 
+# URLWithQueryWithoutFollowingParameters).
+# Change : Effective for new updates only
+# Possible values:
+# 0 - URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used     (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLWithQuery=0
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to keep only parameters
+# you need (if you know them) before counting, manipulating and storing URL.
+# Enter here list of wanted parameters. For example, with "param", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithoutFollowingParameters.
+# Change : Effective for new updates only
+# Example: "param"
+# Default: ""
+# 
+URLWithQueryWithOnlyFollowingParameters=""
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to remove such parameters
+# from the URL before counting, manipulating and storing URL. Enter here list
+# of all non wanted parameters. For example if you enter "id", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithOnlyFollowingParameters.
+# Change : Effective for new updates only
+# Example: "PHPSESSID jsessionid"
+# Default: ""
+# 
+URLWithQueryWithoutFollowingParameters=""
+
+
+# Keep or remove the query string to the referrer URL in the statistics for
+# external referrer pages. This is used to differentiate between the URLs of
+# dynamic referrer pages. If set to 1, mypage.html?id=x and mypage.html?id=y
+# are counted as two different referrer pages.
+# Change : Effective for new updates only
+# Possible values:
+# 0 - Referrer URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used      (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLReferrerWithQuery=0
+
+
+# AWStats can detect setup problems or show you important informations to have
+# a better use. Keep this to 1, except if AWStats says you can change it.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 1
+#
+WarningMessages=1
+
+
+# When an error occurs, AWStats outputs a message related to errors. If you
+# want (in most cases for security reasons) to have no error messages, you
+# can set this parameter to your personalized generic message.
+# Change : Effective immediatly
+# Example: "An error occurred. Contact your Administrator"
+# Default: ""
+#
+ErrorMessages=""
+
+
+# AWStat can be run with debug=x parameter to output various informations
+# to help in debugging or solving troubles. If you want to allow this (not
+# enabled by default for security reasons), set this parameter to 0.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+DebugMessages=0
+
+
+# To help you to detect if your log format is good, AWStats reports an error
+# if all the first NbOfLinesForCorruptedLog lines have a format that does not
+# match the LogFormat parameter.
+# However, some worm virus attack on your web server can result in a very high
+# number of corrupted lines in your log. So if you experience awstats stop
+# because of bad virus records at the beginning of your log file, you can
+# increase this parameter (very rare).
+# Change : Effective for new updates only
+# Default: 50
+#
+NbOfLinesForCorruptedLog=50
+
+
+# For some particular integration needs, you may want to have CGI links to
+# point to another script than awstats.pl.
+# Use the name of this script in WrapperScript parameter.
+# Change : Effective immediatly
+# Example: "awstatslauncher.pl"
+# Default: ""
+#
+WrapperScript=""
+
+
+# DecodeUA must be set to 1 if you use Roxen web server. This server converts
+# all spaces in user agent field into %20. This make the AWStats robots, OS
+# and browsers detection fail in some cases. Just change it to 1 if and only
+# if your web server is Roxen.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+DecodeUA=0
+
+
+# MiscTrackerUrl can be used to make AWStats able to detect some miscellaneous
+# things, that can not be tracked on other way, like:
+# - Javascript disabled
+# - Java enabled
+# - Screen size
+# - Color depth
+# - Macromedia Director plugin
+# - Macromedia Shockwave plugin
+# - Realplayer G2 plugin
+# - QuickTime plugin
+# - Mediaplayer plugin
+# - Acrobat PDF plugin
+# To enable all these features, you must copy the awstats_misc_tracker.js file
+# into a /js/ directory stored in your web document root and add the following
+# HTML code at the end of your index page (but before </BODY>) :
+#
+# <script language=javascript src="/js/awstats_misc_tracker.js"></script>
+# <noscript><img src="/js/awstats_misc_tracker.js?nojs=y" height=0 width=0 border=0 style="display: none"></noscript>
+#
+# If code is not added in index page, all those detection capabilities will be
+# disabled. You must also check that ShowScreenSizeStats and ShowMiscStats
+# parameters are set to 1 to make results appear in AWStats report page.
+# If you want to use another directory than /js/, you must also change the
+# awstatsmisctrackerurl variable into the awstats_misc_tracker.js file.
+# Change : Effective for new updates only.
+# Possible value: URL of javascript tracker file added in your HTML code.
+# Default: "/js/awstats_misc_tracker.js"
+#
+MiscTrackerUrl="/js/awstats_misc_tracker.js"
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# The following values allow you to define accuracy of AWStats entities
+# (robots, browsers, os, referers, file types) detection.
+# It might be a good idea for large web sites or ISP that provides AWStats to
+# high number of customers, to set this parameter to 1 (or 0), instead of 2.
+# Possible values:
+#    0      = No detection,
+#    1      = Medium/Standard detection
+#    2      = Full detection
+# Change : Effective for new updates only
+# Note   : LevelForBrowsersDetection can also accept value "allphones". This
+#          enable detailed detection of phone/pda browsers.
+# Default: 2 (0 for LevelForWormsDetection)
+#
+LevelForBrowsersDetection=2         # 0 disables Browsers detection.
+                                    # 2 reduces AWStats speed by 2%
+                                    # allphones reduces AWStats speed by 5%
+LevelForOSDetection=2               # 0 disables OS detection.
+                                    # 2 reduces AWStats speed by 3%
+LevelForRefererAnalyze=2            # 0 disables Origin detection.
+                                    # 2 reduces AWStats speed by 14%
+LevelForRobotsDetection=2           # 0 disables Robots detection.
+                                    # 2 reduces AWStats speed by 2.5%
+LevelForSearchEnginesDetection=2    # 0 disables Search engines detection.
+                                    # 2 reduces AWStats speed by 9%
+LevelForKeywordsDetection=2         # 0 disables Keyphrases/Keywords detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForFileTypesDetection=2        # 0 disables File types detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForWormsDetection=0            # 0 disables Worms detection.
+                                    # 2 reduces AWStats speed by 15%
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When you use AWStats as a CGI, you can have the reports shown in HTML frames.
+# Frames are only available for report viewed dynamically. When you build
+# pages from command line, this option is not used and no frames are built.
+# Possible values: 0 or 1
+# Default: 1
+#
+UseFramesWhenCGI=1
+
+
+# This parameter asks your browser to open detailed reports into a different
+# window than the main page.
+# Possible values:
+# 0 - Open all in same browser window
+# 1 - Open detailed reports in another window except if using frames
+# 2 - Open always in a different window even if reports are framed
+# Default: 1
+#
+DetailedReportsOnNewWindows=1
+
+
+# You can add, in the HTML report page, a cache lifetime (in seconds) that
+# will be returned to the browser in HTTP header answer by server.
+# This parameter is not used when reports are built with -staticlinks option.
+# Example: 3600
+# Default: 0
+#
+Expires=3600
+
+
+# To avoid too large web pages, you can ask AWStats to limit number of rows of
+# all reported charts to this number when no other limits apply.
+# Default: 1000
+#
+MaxRowsInHTMLOutput=1000
+
+
+# Set your primary language (ISO-639-1 language codes).
+# Possible values:
+#  Albanian=al, Bosnian=ba, Bulgarian=bg, Catalan=ca,
+#  Chinese (Taiwan)=tw, Chinese (Simpliefied)=cn, Croatian=hr, Czech=cz,
+#  Danish=dk, Dutch=nl, English=en, Estonian=et, Euskara=eu, Finnish=fi,
+#  French=fr, Galician=gl, German=de, Greek=gr, Hebrew=he, Hungarian=hu,
+#  Icelandic=is, Indonesian=id, Italian=it, Japanese=jp, Korean=ko,
+#  Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl,
+#  Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru,
+#  Serbian=sr, Slovak=sk, Slovenian=si, Spanish=es, Swedish=se, Turkish=tr,
+#  Ukrainian=ua, Welsh=cy.
+#  First available language accepted by browser=auto
+# Default: "auto"
+#
+Lang="auto"
+
+
+# Set the location of language files.
+# Example: "/usr/share/awstats/lang"
+# Default: "./lang" (means lang directory is in same location than awstats.pl)
+#
+DirLang="./lang"
+
+
+# Show menu header with reports' links
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowMenu=1					
+
+
+# You choose here which reports you want to see in the main page and what you
+# want to see in those reports.
+# Possible values:
+#  0  - Report is not shown at all
+#  1  - Report is shown in main page with an entry in menu and default columns
+# XYZ - Report shows column informations defined by code X,Y,Z...
+#       X,Y,Z... are code letters among the following:
+#        U = Unique visitors
+#        V = Visits
+#        P = Number of pages
+#        H = Number of hits (or mails)
+#        B = Bandwith (or total mail size for mail logs)
+#        L = Last access date
+#        E = Entry pages
+#        X = Exit pages
+#        C = Web compression (mod_gzip,mod_deflate)
+#        M = Average mail size (mail logs)
+#
+
+# Show monthly summary
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowSummary=UVPHB
+
+# Show monthly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowMonthStats=UVPHB
+
+# Show days of month chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: VPHB, Possible column codes: VPHB
+ShowDaysOfMonthStats=VPHB
+
+# Show days of week chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDaysOfWeekStats=PHB
+
+# Show hourly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowHoursStats=PHB
+
+# Show domains/country chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDomainsStats=PHB
+
+# Show hosts chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHBL, Possible column codes: PHBL
+ShowHostsStats=PHBL
+
+# Show authenticated users chart
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHBL
+ShowAuthenticatedUsers=0
+
+# Show robots chart
+# Context: Web, Streaming
+# Default: HBL, Possible column codes: HBL
+ShowRobotsStats=HBL
+
+# Show worms chart
+# Context: Web, Streaming
+# Default: 0 (If set to other than 0, see also LevelForWormsDetection), Possible column codes: HBL
+ShowWormsStats=0
+
+# Show email senders chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailSenders=0
+
+# Show email receivers chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailReceivers=0
+
+# Show session chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowSessionsStats=1
+
+# Show pages-url chart.
+# Context: Web, Streaming, Ftp
+# Default: PBEX, Possible column codes: PBEX
+ShowPagesStats=PBEX
+
+# Show file types chart.
+# Context: Web, Streaming, Ftp
+# Default: HB, Possible column codes: HBC
+ShowFileTypesStats=HB
+
+# Show file size chart (Not yet available)
+# Context: Web, Streaming, Mail, Ftp
+# Default: 1, Possible column codes: None
+ShowFileSizesStats=0		
+
+# Show operating systems chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowOSStats=1
+
+# Show browsers chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowBrowsersStats=1
+
+# Show screen size chart
+# Context: Web, Streaming
+# Default: 0 (If set to 1, see also MiscTrackerUrl), Possible column codes: None
+ShowScreenSizeStats=0
+
+# Show origin chart
+# Context: Web, Streaming
+# Default: PH, Possible column codes: PH
+ShowOriginStats=PH
+
+# Show keyphrases chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeyphrasesStats=1
+
+# Show keywords chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeywordsStats=1
+
+# Show misc chart
+# Context: Web, Streaming
+# Default: a (See also MiscTrackerUrl parameter), Possible column codes: anjdfrqwp
+ShowMiscStats=a
+
+# Show http errors chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowHTTPErrorsStats=1
+
+# Show smtp errors chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: None
+ShowSMTPErrorsStats=0
+
+# Show the cluster report (Your LogFormat must contains the %cluster tag)
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHB
+ShowClusterStats=0
+
+
+# Some graphical reports are followed by the data array of values.
+# If you don't want this array (to reduce the report size for example), you
+# can set thoose options to 0.
+# Possible values: 0 or 1
+# Default: 1
+#
+# Data array values for the ShowMonthStats report
+AddDataArrayMonthStats=1
+# Data array values for the ShowDaysOfMonthStats report
+AddDataArrayShowDaysOfMonthStats=1
+# Data array values for the ShowDaysOfWeekStats report
+AddDataArrayShowDaysOfWeekStats=1
+# Data array values for the ShowHoursStats report
+AddDataArrayShowHoursStats=1
+
+
+# In the Origin chart, you have stats on where your hits came from. You can
+# include hits on pages that come from pages of same sites in this chart.
+# Possible values: 0 or 1
+# Default: 0
+#
+IncludeInternalLinksInOriginSection=0
+
+
+# The following parameters can be used to choose the maximum number of lines
+# shown for the particular following reports.
+#
+# Stats by countries/domains
+MaxNbOfDomain = 10
+MinHitDomain  = 1
+# Stats by hosts
+MaxNbOfHostsShown = 10
+MinHitHost    = 1
+# Stats by authenticated users
+MaxNbOfLoginShown = 10
+MinHitLogin   = 1
+# Stats by robots
+MaxNbOfRobotShown = 10
+MinHitRobot   = 1
+# Stats by pages
+MaxNbOfPageShown = 10
+MinHitFile    = 1
+# Stats by OS
+MaxNbOfOsShown = 10
+MinHitOs      = 1
+# Stats by browsers
+MaxNbOfBrowsersShown = 10
+MinHitBrowser = 1
+# Stats by screen size
+MaxNbOfScreenSizesShown = 5
+MinHitScreenSize = 1
+# Stats by window size (following 2 parameters are not yet used)
+MaxNbOfWindowSizesShown = 5
+MinHitWindowSize = 1
+# Stats by referers
+MaxNbOfRefererShown = 10
+MinHitRefer   = 1
+# Stats for keyphrases
+MaxNbOfKeyphrasesShown = 10
+MinHitKeyphrase = 1
+# Stats for keywords
+MaxNbOfKeywordsShown = 10
+MinHitKeyword = 1
+# Stats for sender or receiver emails
+MaxNbOfEMailsShown = 20
+MinHitEMail   = 1
+
+
+# Choose if you want the week report to start on sunday or monday
+# Possible values:
+# 0 - Week starts on sunday
+# 1 - Week starts on monday
+# Default: 1
+#
+FirstDayOfWeek=1
+
+
+# List of visible flags that link to other language translations.
+# See Lang parameter for list of allowed flag/language codes.
+# If you don't want any flag link, set ShowFlagLinks to "".
+# This parameter is used only if ShowMenu parameter is set to 1.
+# Possible values: "" or "language_codes_separated_by_space"
+# Example: "en es fr nl de"
+# Default: ""
+#
+ShowFlagLinks=""
+
+
+# Each URL, shown in stats report views, are links you can click.
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowLinksOnUrl=1
+
+
+# When AWStats builds HTML links in its report pages, it starts those links
+# with "http://". However some links might be HTTPS links, so you can enter
+# here the root of all your HTTPS links. If all your site is a SSL web site,
+# just enter "/".
+# This parameter is not used if ShowLinksOnUrl is 0.
+# Example: "/shopping"
+# Example: "/"
+# Default: ""
+#
+UseHTTPSLinkForUrl=""
+
+
+# Maximum length of URL part shown on stats page (number of characters).
+# This affects only URL visible text, links still work.
+# Default: 64
+#
+MaxLengthOfShownURL=64
+
+
+# You can enter HTML code that will be added at the top of AWStats reports.
+# Default: ""
+#
+HTMLHeadSection=""
+
+
+# You can enter HTML code that will be added at the end of AWStats reports.
+# Great to add advert ban.
+# Default: ""
+#
+HTMLEndSection=""
+
+
+# You can set Logo and LogoLink to use your own logo.
+# Logo must be the name of image file (must be in $DirIcons/other directory).
+# LogoLink is the expected URL when clicking on Logo.
+# Default: "awstats_logo6.png"
+#
+Logo="awstats_logo6.png"
+LogoLink="http://awstats.sourceforge.net"
+
+
+# Value of maximum bar width/height for horizontal/vertical HTML graphics bars.
+# Default: 260/90
+#
+BarWidth   = 260
+BarHeight  = 90
+
+
+# You can ask AWStats to use a particular CSS (Cascading Style Sheet) to
+# change its look. To create a style sheet, you can use samples provided with
+# AWStats in wwwroot/css directory.
+# Example: "/awstatscss/awstats_bw.css"
+# Example: "/css/awstats_bw.css"
+# Default: ""
+#
+StyleSheet=""
+
+
+# Those color parameters can be used (if StyleSheet parameter is not used)
+# to change AWStats look.
+# Example: color_name="RRGGBB"	# RRGGBB is Red Green Blue components in Hex
+#
+color_Background="FFFFFF"		# Background color for main page (Default = "FFFFFF")
+color_TableBGTitle="CCCCDD"		# Background color for table title (Default = "CCCCDD")
+color_TableTitle="000000"		# Table title font color (Default = "000000")
+color_TableBG="CCCCDD"			# Background color for table (Default = "CCCCDD")
+color_TableRowTitle="FFFFFF"	# Table row title font color (Default = "FFFFFF")
+color_TableBGRowTitle="ECECEC"	# Background color for row title (Default = "ECECEC")
+color_TableBorder="ECECEC"		# Table border color (Default = "ECECEC")
+color_text="000000"				# Color of text (Default = "000000")
+color_textpercent="606060"		# Color of text for percent values (Default = "606060")
+color_titletext="000000"		# Color of text title within colored Title Rows (Default = "000000")
+color_weekend="EAEAEA"			# Color for week-end days (Default = "EAEAEA")
+color_link="0011BB"				# Color of HTML links (Default = "0011BB")
+color_hover="605040"			# Color of HTML on-mouseover links (Default = "605040") 
+color_u="FFAA66"				# Background color for number of unique visitors (Default = "FFAA66")
+color_v="F4F090"				# Background color for number of visites (Default = "F4F090")
+color_p="4477DD"				# Background color for number of pages (Default = "4477DD")
+color_h="66DDEE"				# Background color for number of hits (Default = "66DDEE")
+color_k="2EA495"				# Background color for number of bytes (Default = "2EA495")
+color_s="8888DD"				# Background color for number of search (Default = "8888DD")
+color_e="CEC2E8"				# Background color for number of entry pages (Default = "CEC2E8")
+color_x="C1B2E2"				# Background color for number of exit pages (Default = "C1B2E2")
+
+
+
+#-----------------------------------------------------------------------------
+# PLUGINS
+#-----------------------------------------------------------------------------
+
+# Add here all plugin files you want to load.
+# Plugin files must be .pm files stored in 'plugins' directory.
+# Uncomment LoadPlugin lines to enable a plugin after checking that perl
+# modules required by the plugin are installed.
+
+# Plugin: Tooltips
+# Perl modules required: None
+# Add some tooltips help on HTML report pages.
+# Note that enabling this kind of help will increased HTML report pages size,
+# so server load and bandwidth.
+#
+LoadPlugin="tooltips"
+
+# Plugin: DecodeUTFKeys
+# Perl modules required: Encode and URI::Escape
+# Allow AWStats to show correctly (in language charset) keywords/keyphrases
+# strings even if they were UTF8 coded by the referer search engine.
+#
+#LoadPlugin="decodeutfkeys"
+
+# Plugin: IPv6
+# Perl modules required: Net::IP and Net::DNS
+# This plugin gives AWStats capability to make reverse DNS lookup on IPv6
+# addresses.
+# Note: If you are interested in having country report, you should use the
+# geoipfree or geoip plugin instead of enabled reverse DNS lookup.
+#
+#LoadPlugin="ipv6"
+
+# Plugin: HashFiles
+# Perl modules required: Storable
+# AWStats DNS cache files are read/saved as native hash files. This increases
+# DNS cache files loading speed, above all for very large web sites.
+#
+LoadPlugin="hashfiles"
+
+# Plugin: GeoIP
+# Perl modules required: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IP module 
+# from Maxmind, database more up to date) or the GeoIPfree plugin (need
+# Perl Geo::IPfree module, database less up to date).
+# This plugin reduces AWStats speed of 8% !
+#
+LoadPlugin="geoip GEOIP_STANDARD /usr/share/GeoIP/GeoIP.dat"
+
+# Plugin: GeoIPfree
+# Perl modules required: Geo::IPfree version 0.2+ (from Graciliano M.P.)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IPfree
+# module, database less up to date) or the GeoIP plugin (need Perl Geo::IP
+# module from Maxmind, database more up to date).
+# Note: Activestate provide a corrupted version of Geo::IPfree 0.2 Perl
+# module, so install it from elsewhere (from www.cpan.org for example).
+# This plugin reduces AWStats speed of 10% !
+#
+#LoadPlugin="geoipfree"
+
+# Plugin: GeoIP_Region_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by regions. Only regions for US and 
+# Canada can be detected.
+# Note: This plugin need Maxmind GeoIP Perl module AND the region database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Region database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_region_maxmind GEOIP_STANDARD /pathto/GeoIPRegion.dat"
+
+# Plugin: GeoIP_City_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by cities (with country and regions
+# informations for major countries).
+# Note: This plugin need Maxmind GeoIP Perl module AND the city database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the City database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /pathto/GeoIPCity.dat"
+
+# Plugin: GeoIP_ISP_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by ISP.
+# Note: This plugin need Maxmind GeoIP Perl module AND the ISP database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the ISP database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_isp_maxmind GEOIP_STANDARD /pathto/GeoIPISP.dat"
+
+# Plugin: GeoIP_Org_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by Organization name
+# Note: This plugin need Maxmind GeoIP Perl module AND the Org database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Org database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_org_maxmind GEOIP_STANDARD /pathto/GeoIPOrg.dat"
+
+# Plugin: UserInfo
+# Perl modules required: None
+# Add a text (Firtname, Lastname, Office Department, ...) in authenticated user
+# reports for each login value.
+# A text file called userinfo.myconfig.txt, with two fields (first is login,
+# second is text to show, separated by a tab char) must be created in DirData
+# directory.
+#
+#LoadPlugin="userinfo"
+
+# Plugin: HostInfo
+# Perl modules required: Net::XWhois
+# Add a column into host chart with a link to open a popup window that shows
+# info on host (like whois records).
+#
+#LoadPlugin="hostinfo"
+
+# Plugin: ClusterInfo
+# Perl modules required: None
+# Add a text (for example a full hostname) in cluster reports for each cluster
+# number.
+# A text file called clusterinfo.myconfig.txt, with two fields (first is
+# cluster number, second is text to show) separated by a tab char. must be
+# created into DirData directory.
+# Note this plugin is useless if ShowClusterStats is set to 0 or if you don't
+# use a personalized log format that contains %cluster tag.
+#
+#LoadPlugin="clusterinfo"
+
+# Plugin: UrlAliases
+# Perl modules required: None
+# Add a text (Page title, description...) in URL reports before URL value.
+# A text file called urlalias.myconfig.txt, with two fields (first is URL,
+# second is text to show, separated by a tab char) must be created into
+# DirData directory.
+#
+#LoadPlugin="urlalias"
+
+# Plugin: TimeHiRes
+# Perl modules required: Time::HiRes (if Perl < 5.8)
+# Time reported by -showsteps option is in millisecond. For debug purpose.
+#
+#LoadPlugin="timehires"		
+
+# Plugin: TimeZone
+# Perl modules required: Time::Local
+# Allow AWStats to correct a bad timezone for user of some IIS that use
+# GMT date in its log instead of local server time.
+# This module is useless for Apache and most IIS version.
+# This plugin reduces AWStats speed of 40% !!!!!!!
+#
+#LoadPlugin="timezone +2"
+
+# Plugin: Rawlog
+# Perl modules required: None
+# This plugin adds a form in AWStats main page to allow users to see raw
+# content of current log files. A filter is also available.
+#
+#LoadPlugin="rawlog"
+
+# Plugin: GraphApplet
+# Perl modules required: None
+# Supported charts are built by a 3D graphic applet.
+#
+#LoadPlugin="graphapplet /awstatsclasses"				# EXPERIMENTAL FEATURE
+
+
+
+#-----------------------------------------------------------------------------
+# EXTRA SECTIONS
+#-----------------------------------------------------------------------------
+
+# You can define your own charts, you choose here what are rows and columns
+# keys. This feature is particularly useful for marketing purpose, tracking
+# products orders for example.
+# For this, edit all parameters of Extra section. Each set of parameter is a
+# different chart. For several charts, duplicate section changing the number.
+# Note: Each Extra section reduces AWStats speed by 8%.
+#
+# WARNING: A wrong setup of Extra section might result in too large arrays
+# that will consume all your memory, making AWStats unusable after several
+# updates, so be sure to setup it correctly.
+# In most cases, you don't need this feature.
+#
+# ExtraSectionNameX is title of your personalized chart.
+# ExtraSectionCodeFilterX is list of codes the record code field must match.
+#   Put an empty string for no test on code.
+# ExtraSectionConditionX are conditions you can use to count or not the hit,
+#   Use one of the field condition
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,extraX)
+#   and a regex to match, after a coma. Use "||" for "OR".
+# ExtraSectionFirstColumnTitleX is the first column title of the chart.
+# ExtraSectionFirstColumnValuesX is a string to tell AWStats which field to
+#   extract value from
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,VHOST,extraX)
+#   and how to extract the value (using regex syntax). Each different value
+#   found will appear in first column of report on a different row. Be sure
+#   that list of different possible values will not grow indefinitely.
+# ExtraSectionFirstColumnFormatX is the string used to write value.
+# ExtraSectionStatTypesX are things you want to count. You can use standard
+#   code letters (P for pages,H for hits,B for bandwidth,L for last access).
+# ExtraSectionAddAverageRowX add a row at bottom of chart with average values.
+# ExtraSectionAddSumRowX add a row at bottom of chart with sum values.
+# MaxNbOfExtraX is maximum number of rows shown in chart.
+# MinHitExtraX is minimum number of hits required to be shown in chart.
+#
+
+# Example to report the 20 products the most ordered by "order.cgi" script
+#ExtraSectionName1="Product orders"
+#ExtraSectionCodeFilter1="200 304"
+#ExtraSectionCondition1="URL,\/cgi\-bin\/order\.cgi||URL,\/cgi\-bin\/order2\.cgi"
+#ExtraSectionFirstColumnTitle1="Product ID"
+#ExtraSectionFirstColumnValues1="QUERY_STRING,productid=([^&]+)"
+#ExtraSectionFirstColumnFormat1="%s"
+#ExtraSectionStatTypes1=PL
+#ExtraSectionAddAverageRow1=0
+#ExtraSectionAddSumRow1=1
+#MaxNbOfExtra1=20
+#MinHitExtra1=1
+
+
+# There is also a global parameter ExtraTrackedRowsLimit that limits the
+# number of possible rows an ExtraSection can report. This parameter is
+# here to protect too much memory use when you make a bad setup in your
+# ExtraSection. It applies to all ExtraSection independently meaning that
+# none ExtraSection can report more rows than value defined by ExtraTrackedRowsLimit.
+# If you know an ExtraSection will report more rows than its value, you should
+# increase this parameter or AWStats will stop with an error.
+# Example: 2000
+# Default: 500
+#
+ExtraTrackedRowsLimit=500
+
+
+#-----------------------------------------------------------------------------
+# INCLUDES
+#-----------------------------------------------------------------------------
+
+# You can include other config files using the directive with the name of the
+# config file.
+# This is particularly useful for users who have a lot of virtual servers, so
+# a lot of config files and want to maintain common values in only one file.
+# Note that when a variable is defined both in a config file and in an
+# included file, AWStats will use the last value read for parameters that
+# contains one value and AWStats will concat all values from both files for
+# parameters that are lists of values.
+#
+
+#Include ""
+
diff --git a/modules/awstats/manifests/init.pp b/modules/awstats/manifests/init.pp
index 5c1d3ec..d9733b8 100644
--- a/modules/awstats/manifests/init.pp
+++ b/modules/awstats/manifests/init.pp
@@ -41,5 +41,9 @@ class awstats::base {
         source => 'puppet:///awstats/awstats.translate.fedoraproject.org.conf',
     }
 
+    file { '/etc/awstats/awstats.fedorahosted.org.conf':
+        source => 'puppet:///awstats/awstats.fedorahosted.org.conf',
+    }
+
 }

commit 2e3b92e6052e6c86a0a6cfa9a256d186d0a403f7
Author: Ricky Zhou <[email-masked]>
Date:   Fri Jul 18 23:39:34 2008 +0000

    Keep query strings for mirrors.fp.o.

diff --git a/modules/awstats/files/awstats.mirrors.fedoraproject.org.conf b/modules/awstats/files/awstats.mirrors.fedoraproject.org.conf
index 3a36c6e..58ab8c3 100644
--- a/modules/awstats/files/awstats.mirrors.fedoraproject.org.conf
+++ b/modules/awstats/files/awstats.mirrors.fedoraproject.org.conf
@@ -651,7 +651,7 @@ URLQuerySeparators="?;"
 # 1 - Full URL with query string is used     (ie: "/mypage.html?p=x&q=y")
 # Default: 0
 # 
-URLWithQuery=0
+URLWithQuery=1

 # When URLWithQuery is on, you will get the full URL with all parameters in

commit f2607c24bbd3649fbc5a6ea14ba7453f3119b08c
Author: Ricky Zhou <[email-masked]>
Date:   Fri Jul 18 23:37:41 2008 +0000

    Must have gotten files mixed up.

diff --git a/modules/awstats/files/awstats.download.fedoraproject.org.conf b/modules/awstats/files/awstats.download.fedoraproject.org.conf
index 3a36c6e..ea2f254 100644
--- a/modules/awstats/files/awstats.download.fedoraproject.org.conf
+++ b/modules/awstats/files/awstats.download.fedoraproject.org.conf
@@ -48,7 +48,7 @@
 # If there are several log files from load balancing servers :
 # Example: "/pathtotools/logresolvemerge.pl *.log |"
 #
-LogFile="/usr/share/awstats/tools/logresolvemerge.pl /var/log/hosts/proxy*/*/*/*/http/mirrors.fedoraproject.org-access.log | sed -e 's/^ //' |"
+LogFile="/usr/share/awstats/tools/logresolvemerge.pl /var/log/hosts/proxy*/*/*/*/http/download.fedoraproject.org-access.log | sed -e 's/^ //' |"

 # Enter the log file type you want to analyze.
@@ -150,7 +150,7 @@ LogSeparator=" "
 # Example: "ftp.domain.com"
 # Example: "domain.com"
 #
-SiteDomain="mirrors.fedoraproject.org"
+SiteDomain="download.fedoraproject.org"

 # Enter here all other possible domain names, addresses or virtual host

commit 7b8d7a65c12b32f526da50b083a446f82558dd55
Author: Ricky Zhou <[email-masked]>
Date:   Fri Jul 18 23:31:58 2008 +0000

    Forgot to add to the manifest.

diff --git a/modules/awstats/manifests/init.pp b/modules/awstats/manifests/init.pp
index 66c9e8c..5c1d3ec 100644
--- a/modules/awstats/manifests/init.pp
+++ b/modules/awstats/manifests/init.pp
@@ -33,6 +33,10 @@ class awstats::base {
         source => 'puppet:///awstats/awstats.mirrors.fedoraproject.org.conf',
     }
 
+    file { '/etc/awstats/awstats.download.fedoraproject.org.conf':
+        source => 'puppet:///awstats/awstats.download.fedoraproject.org.conf',
+    }
+
     file { '/etc/awstats/awstats.translate.fedoraproject.org.conf':
         source => 'puppet:///awstats/awstats.translate.fedoraproject.org.conf',
     }

commit 4e544c3399fe9b53e33757572430c318136d1b54
Author: Ricky Zhou <[email-masked]>
Date:   Fri Jul 18 23:28:24 2008 +0000

    Add mirrors.fedoraproject.ogr, add 301 just in case.

diff --git a/modules/awstats/files/awstats.cron b/modules/awstats/files/awstats.cron
index abb0a19..0c011b0 100755
--- a/modules/awstats/files/awstats.cron
+++ b/modules/awstats/files/awstats.cron
@@ -15,6 +15,11 @@ mkdir -p /var/www/html/awstats/mirrors.fedoraproject.org
 /usr/share/awstats/tools/awstats_buildstaticpages.pl -config=mirrors.fedoraproject.org -update -dir=/var/www/html/awstats/mirrors.fedoraproject.org > /dev/null
 ln -sf /var/www/html/awstats/mirrors.fedoraproject.org/awstats.mirrors.fedoraproject.org.html  /var/www/html/awstats/mirrors.fedoraproject.org/index.html
 
+# download.fedoraproject.org
+mkdir -p /var/www/html/awstats/download.fedoraproject.org
+/usr/share/awstats/tools/awstats_buildstaticpages.pl -config=download.fedoraproject.org -update -dir=/var/www/html/awstats/download.fedoraproject.org > /dev/null
+ln -sf /var/www/html/awstats/download.fedoraproject.org/awstats.download.fedoraproject.org.html  /var/www/html/awstats/download.fedoraproject.org/index.html
+
 # translate.fedoraproject.org
 mkdir -p /var/www/html/awstats/translate.fedoraproject.org
 /usr/share/awstats/tools/awstats_buildstaticpages.pl -config=translate.fedoraproject.org -update -dir=/var/www/html/awstats/translate.fedoraproject.org > /dev/null
diff --git a/modules/awstats/files/awstats.download.fedoraproject.org.conf b/modules/awstats/files/awstats.download.fedoraproject.org.conf
new file mode 100644
index 0000000..3a36c6e
--- /dev/null
+++ b/modules/awstats/files/awstats.download.fedoraproject.org.conf
@@ -0,0 +1,1499 @@
+# AWSTATS CONFIGURE FILE 6.6
+#-----------------------------------------------------------------------------
+# Copy this file into awstats.www.mydomain.conf and edit this new config file
+# to setup AWStats (See documentation in docs/ directory).
+# The config file must be in /etc/awstats, /usr/local/etc/awstats or /etc (for
+# Unix/Linux) or same directory than awstats.pl (Windows, Mac, Unix/Linux...)
+# To include an environment variable in any parameter (AWStats will replace
+# it with its value when reading it), follow the example:
+# Parameter="__ENVNAME__"
+# Note that environment variable AWSTATS_CURRENT_CONFIG is always defined with
+# the config value in an AWStats running session and can be used like others.
+#-----------------------------------------------------------------------------
+# $Revision: 1.327 $ - $Author: eldy $ - $Date: 2006/04/21 22:28:49 $
+
+
+
+#-----------------------------------------------------------------------------
+# MAIN SETUP SECTION (Required to make AWStats work)
+#-----------------------------------------------------------------------------
+
+# "LogFile" contains the web, ftp or mail server log file to analyze.
+# Possible values: A full path, or a relative path from awstats.pl directory.
+# Example: "/var/log/apache/access.log"
+# Example: "../logs/mycombinedlog.log"
+# You can also use tags in this filename if you need a dynamic file name
+# depending on date or time (Replacement is made by AWStats at the beginning
+# of its execution). This is available tags :
+#   %YYYY-n  is replaced with 4 digits year we were n hours ago
+#   %YY-n    is replaced with 2 digits year we were n hours ago
+#   %MM-n    is replaced with 2 digits month we were n hours ago
+#   %MO-n    is replaced with 3 letters month we were n hours ago
+#   %DD-n    is replaced with day we were n hours ago
+#   %HH-n    is replaced with hour we were n hours ago
+#   %NS-n    is replaced with number of seconds at 00:00 since 1970
+#   %WM-n    is replaced with the week number in month (1-5)
+#   %Wm-n    is replaced with the week number in month (0-4)
+#   %WY-n    is replaced with the week number in year (01-52)
+#   %Wy-n    is replaced with the week number in year (00-51)
+#   %DW-n    is replaced with the day number in week (1-7, 1=sunday)
+#                              use n=24 if you need (1-7, 1=monday)
+#   %Dw-n    is replaced with the day number in week (0-6, 0=sunday)
+#                              use n=24 if you need (0-6, 0=monday)
+#   Use 0 for n if you need current year, month, day, hour...
+# Example: "/var/log/access_log.%YYYY-0%MM-0%DD-0.log"
+# Example: "C:/WINNT/system32/LogFiles/W3SVC1/ex%YY-24%MM-24%DD-24.log"
+# You can also use a pipe if log file come from a pipe :
+# Example: "gzip -d </var/log/apache/access.log.gz |"
+# If there are several log files from load balancing servers :
+# Example: "/pathtotools/logresolvemerge.pl *.log |"
+#
+LogFile="/usr/share/awstats/tools/logresolvemerge.pl /var/log/hosts/proxy*/*/*/*/http/mirrors.fedoraproject.org-access.log | sed -e 's/^ //' |"
+
+
+# Enter the log file type you want to analyze.
+# Possible values:
+#  W - For a web log file
+#  S - For a streaming log file
+#  M - For a mail log file
+#  F - For a ftp log file
+# Example: W
+# Default: W
+#
+LogType=W
+
+
+# Enter here your log format (Must match your web server config. See setup
+# instructions in documentation to know how to configure your web server to
+# have the required log format).
+# Possible values: 1,2,3,4 or "your_own_personalized_log_format"
+# 1 - Apache or Lotus Notes/Domino native combined log format (NCSA combined/XLF/ELF log format)
+# 2 - IIS or ISA format (IIS W3C log format). See FAQ-COM115 For ISA.
+# 3 - Webstar native log format.
+# 4 - Apache or Squid native common log format (NCSA common/CLF log format)
+#     With LogFormat=4, some features (browsers, os, keywords...) can't work.
+# "your_own_personalized_log_format" = If your log is ftp, mail or other format,
+#     you must use following keys to define the log format string (See FAQ for
+#     ftp, mail or exotic web log format examples):
+#   %host             Client hostname or IP address (or Sender host for mail log)
+#   %host_r           Receiver hostname or IP address (for mail log)
+#   %lognamequot      Authenticated login/user with format: "john"
+#   %logname          Authenticated login/user with format: john
+#   %time1            Date and time with format: [dd/mon/yyyy:hh:mm:ss +0000] or [dd/mon/yyyy:hh:mm:ss]
+#   %time2            Date and time with format: yyyy-mm-dd hh:mm:ss
+#   %time3            Date and time with format: Mon dd hh:mm:ss or Mon dd hh:mm:ss yyyy
+#   %time4            Date and time with unix timestamp format: dddddddddd
+#   %methodurl        Method and URL with format: "GET /index.html HTTP/x.x"
+#   %methodurlnoprot  Method and URL with format: "GET /index.html"
+#   %method           Method with format: GET
+#   %url              URL only with format: /index.html
+#   %query            Query string (used by URLWithQuery option)
+#   %code             Return code status (with format for web log: 999)
+#   %bytesd           Size of document in bytes
+#   %refererquot      Referer page with format: "http://from.com/from.htm"
+#   %referer          Referer page with format: http://from.com/from.htm
+#   %uabracket        User agent with format: [Mozilla/4.0 (compatible, ...)]
+#   %uaquot           User agent with format: "Mozilla/4.0 (compatible, ...)"
+#   %ua               User agent with format: Mozilla/4.0_(compatible...)
+#   %gzipin           mod_gzip compression input bytes: In:XXX
+#   %gzipout          mod_gzip compression output bytes & ratio: Out:YYY:ZZpct.
+#   %gzipratio        mod_gzip compression ratio: ZZpct.
+#   %deflateratio     mod_deflate compression ratio with format: (ZZ)
+#   %email            EMail sender (for mail log)
+#   %email_r          EMail receiver (for mail log)
+#   %virtualname      Web sever virtual hostname. Use this tag when same log
+#                     contains data of several virtual web servers. AWStats
+#                     will discard records not in SiteDomain nor HostAliases
+#   %cluster          If log file is provided from several computers (merged by
+#                     logresolvemerge.pl), use this to define cluster id field.
+#   %extraX           Another field that you plan to use for building a
+#                     personalized report with ExtraSection feature (See later).
+#   If your log format has some fields not included in this list, use:
+#   %other            Means another not used field
+#   %otherquot        Means another not used double quoted field
+#
+# Examples for Apache combined logs (following two examples are equivalent):
+# LogFormat = 1
+# LogFormat = "%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot"
+#
+# Example for IIS:
+# LogFormat = 2
+#
+LogFormat = 1
+
+
+# If your log field's separator is not a space, you can change this parameter.
+# This parameter is not used if LogFormat is a predefined value (1,2,3,4)
+# Backslash can be used as escape character.
+# Example: " "
+# Example: "\t"
+# Example: "\|"
+# Example: ","
+# Default: " "
+#
+LogSeparator=" "
+
+
+# "SiteDomain" must contain the main domain name, or the main intranet web
+# server name, used to reach the web site.
+# If you share the same log file for several virtual web servers, this
+# parameter is used to tell AWStats to filter record that contains records for
+# this virtual host name only (So check that this virtual hostname can be
+# found in your log file and use a personalized log format that include the
+# %virtualname tag).
+# But for multi hosting a better solution is to have one log file for each
+# virtual web server. In this case, this parameter is only used to generate
+# full URL's links when ShowLinksOnUrl option is set to 1.
+# If analyzing mail log, enter here the domain name of mail server.
+# Example: "myintranetserver"
+# Example: "www.domain.com"
+# Example: "ftp.domain.com"
+# Example: "domain.com"
+#
+SiteDomain="mirrors.fedoraproject.org"
+
+
+# Enter here all other possible domain names, addresses or virtual host
+# aliases someone can use to access your site. Try to keep only the minimum
+# number of possible names/addresses to have the best performances.
+# You can repeat the "SiteDomain" value in this list.
+# This parameter is used to analyze referer field in log file and to help
+# AWStats to know if a referer URL is a local URL of same site or an URL of
+# another site.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Note: You can also use @/mypath/myfile if list of aliases are in a file.
+# Example: "www.myserver.com localhost 127.0.0.1 REGEX[mydomain\.(net|org)$]"
+#
+HostAliases="REGEX[.*\.fedoraproject\.org]"
+
+
+# If you want to have hosts reported by name instead of ip address, AWStats
+# need to make reverse DNS lookups (if not already done in your log file).
+# With DNSLookup to 0, all hosts will be reported by their IP addresses and
+# not by the full hostname of visitors (except if names are already available
+# in log file).
+# If you want/need to set DNSLookup to 1, don't forget that this will reduce
+# dramatically AWStats update process speed. Do not use on large web sites.
+# Note: Reverse DNS lookup is done on IPv4 only (Enable ipv6 plugin for IPv6).
+# Note: Result of DNS Lookup can be used to build the Country report. However
+# it is highly recommanded to enable the plugin 'geoipfree' or 'geoip' to
+# have an accurate Country report with no need of DNS Lookup.
+# Possible values:
+# 0 - No DNS Lookup
+# 1 - DNS Lookup is fully enabled
+# 2 - DNS Lookup is made only from static DNS cache file (if it exists)
+# Default: 2
+# 
+DNSLookup=2
+
+
+# When AWStats updates its statistics, it stores results of its analysis in 
+# files (AWStats database). All those files are written in the directory
+# defined by the "DirData" parameter. Set this value to the directory where
+# you want AWStats to save its database and working files into.
+# Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser"
+# feature (see later), you need "Write" permissions by web server user on this
+# directory (and "Modify" for Windows NTFS file systems).
+# Example: "/var/lib/awstats"
+# Example: "../data"
+# Example: "C:/awstats_data_dir"
+# Default: "."          (means same directory as awstats.pl)
+#
+DirData="/var/lib/awstats"
+
+
+# Relative or absolute web URL of your awstats cgi-bin directory.
+# This parameter is used only when AWStats is run from command line
+# with -output option (to generate links in HTML reported page).
+# Example: "/awstats"
+# Default: "/cgi-bin"   (means awstats.pl is in "/yourwwwroot/cgi-bin")
+#
+DirCgi="/awstats"
+
+
+# Relative or absolute web URL of your awstats icon directory.
+# If you build static reports ("... -output > outputpath/output.html"), enter
+# path of icon directory relative to the output directory 'outputpath'.
+# Example: "/awstatsicons"
+# Example: "../icon"
+# Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon")
+#
+DirIcons="/awstatsicons"
+
+
+# When this parameter is set to 1, AWStats adds a button on report page to
+# allow to "update" statistics from a web browser. Warning, when "update" is
+# made from a browser, AWStats is run as a CGI by the web server user defined
+# in your web server (user "nobody" by default with Apache, "IUSR_XXX" with
+# IIS), so the "DirData" directory and all already existing history files
+# awstatsMMYYYY[.xxx].txt must be writable by this user. Change permissions if
+# necessary to "Read/Write" (and "Modify" for Windows NTFS file systems).
+# Warning: Update process can be long so you might experience "time out"
+# browser errors if you don't launch AWStats frequently enough.
+# When set to 0, update is only made when AWStats is run from the command
+# line interface (or a task scheduler).
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowToUpdateStatsFromBrowser=0
+
+
+# AWStats saves and sorts its database on a month basis (except if using
+# databasebreak option from command line). 
+# However, if you choose the -month=all from command line or
+# value '-Year-' from CGI combo form to have a report for all year, AWStats
+# needs to reload all data for full year (each month), and sort them,
+# requiring a large amount of time, memory and CPU. This might be a problem
+# for web hosting providers that offer AWStats for large sites, on shared
+# servers, to non CPU cautious customers.
+# For this reason, the 'full year' is only enabled on Command Line by default.
+# You can change this by setting this parameter to 0, 1, 2 or 3.
+# Possible values:
+#  0 - Never allowed
+#  1 - Allowed on CLI only, -Year- value in combo is not visible
+#  2 - Allowed on CLI only, -Year- value in combo is visible but not allowed
+#  3 - Possible on CLI and CGI
+# Default: 2
+#
+AllowFullYearView=2
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When the update process runs, AWStats can set a lock file in TEMP or TMP
+# directory. This lock is to avoid to have 2 update processes running at the
+# same time to prevent unknown conflicts problems and avoid DoS attacks when
+# AllowToUpdateStatsFromBrowser is set to 1.
+# Because, when you use lock file, you can experience sometimes problems in
+# lock file not correctly removed (killed process for example requires that
+# you remove the file manualy), this option is not enabled by default (Do
+# not enable this option with no console server access).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+EnableLockForUpdate=1
+
+
+# AWStats can do reverse DNS lookups through a static DNS cache file that was
+# previously created manually. If no path is given in static DNS cache file
+# name, AWStats will search DirData directory. This file is never changed.
+# This option is not used if DNSLookup=0.
+# Note: DNS cache file format is 'minsince1970 ipaddress resolved_hostname'
+# or just 'ipaddress resolved_hostname'
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscache"
+# Default: "dnscache.txt"
+#
+DNSStaticCacheFile="dnscache.txt"
+
+
+# AWStats can do reverse DNS lookups through a DNS cache file that was created
+# by a previous run of AWStats. This file is erased and recreated after each
+# statistics update process. You don't need to create and/or edit it.
+# AWStats will read and save this file in DirData directory.
+# This option is used only if DNSLookup=1.
+# Note: If a DNSStaticCacheFile is available, AWStats will check for DNS
+# lookup in DNSLastUpdateCacheFile after checking into DNSStaticCacheFile.
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscachelastupdate"
+# Default: "dnscachelastupdate.txt"
+#
+DNSLastUpdateCacheFile="dnscachelastupdate.txt"
+
+
+# You can specify specific IP addresses that should NOT be looked up in DNS.
+# This option is used only if DNSLookup=1.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "123.123.123.123 REGEX[^192\.168\.]"
+# Default: ""
+#
+SkipDNSLookupFor=""
+
+
+# The following two parameters allow you to protect a config file from being
+# read by AWStats when called from a browser if web user has not been
+# authenticated. Your AWStats program must be in a web protected "realm" (With
+# Apache, you can use .htaccess files to do so. With other web servers, see
+# your server setup manual).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowAccessFromWebToAuthenticatedUsersOnly=0
+
+
+# This parameter gives the list of all authorized authenticated users to view
+# statistics for this domain/config file. This parameter is used only if
+# AllowAccessFromWebToAuthenticatedUsersOnly is set to 1.
+# Change : Effective immediatly
+# Example: "user1 user2"
+# Example: "__REMOTE_USER__"
+# Default: ""
+#
+AllowAccessFromWebToFollowingAuthenticatedUsers=""
+
+
+# When this parameter is defined to something, the IP address of the user that
+# reads its statistics from a browser (when AWStats is used as a CGI) is
+# checked and must match one of the IP address values or ranges.
+# Change : Effective immediatly
+# Example: "127.0.0.1 123.123.123.1-123.123.123.255"
+# Default: ""
+#
+AllowAccessFromWebToFollowingIPAddresses=""
+
+
+# If the "DirData" directory (see above) does not exist, AWStats return an
+# error. However, you can ask AWStats to create it.
+# This option can be used by some Web Hosting Providers that has defined a 
+# dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and
+# don't want to have to create a new directory each time they add a new user.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+CreateDirDataIfNotExists=0
+
+
+# You can choose in which format the Awstats history database is saved.
+# Note: Using "xml" format make AWStats building database files three times
+# larger than using "text" format.
+# Change : Database format is switched after next update
+# Possible values: text or xml
+# Default: text
+#
+BuildHistoryFormat=text
+
+
+# If you prefer having the report output pages be built as XML compliant pages
+# instead of simple HTML pages, you can set this to 'xhtml' (May not work
+# properly with old browsers).
+# Change : Effective immediatly
+# Possible values: html or xhtml
+# Default: html
+#
+BuildReportFormat=html
+
+
+# AWStats databases can be updated from command line of from a browser (when
+# used as a cgi program). So AWStats database files need write permission
+# for both command line user and default web server user (nobody for Unix,
+# IUSR_xxx for IIS/Windows,...).
+# To avoid permission problems between update process (run by an admin user)
+# and CGI process (ran by a low level user), AWStats can save its database 
+# files with read and write permissions for everyone.
+# By default, AWStats keeps default user permissions on updated files. If you 
+# set AllowToUpdateStatsFromBrowser to 1, you can change this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+SaveDatabaseFilesWithPermissionsForEveryone=0
+
+
+# AWStats can purge log file, after analyzing it. Note that AWStats is able
+# to detect new lines in a log file, to process only them, so you can launch
+# AWStats as often as you want, even with this parameter to 0.
+# With 0, no purge is made, so you must use a scheduled task or a web server
+# that make this purge frequently.
+# With 1, the purge of the log file is made each time AWStats update is run.
+# This parameter doesn't work with IIS (This web server doesn't let its log
+# file to be purged).
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+PurgeLogFile=0
+
+
+# When PurgeLogFile is setup to 1, AWStats will clean your log file after
+# processing it. You can however keep an archive file of all processed log
+# records by setting this parameter (For example if you want to use another
+# log analyzer). The archived log file is saved in "DirData" with name
+# awstats_archive.configname[.suffix].log
+# This parameter is not used if PurgeLogFile=0
+# Change : Effective for new updates only
+# Possible values: 0, 1, or tags (See LogFile parameter) for suffix
+# Example: 1
+# Example: %YYYY%MM%DD
+# Default: 0
+#
+ArchiveLogRecords=0
+
+
+# Each time you run the update process, AWStats overwrites the 'historic file'
+# for the month (awstatsMMYYYY[.*].txt) with the updated one.
+# When write errors occurs (IO, disk full,...), this historic file can be
+# corrupted and must be deleted. Because this file contains information of all
+# past processed log files, you will loose old stats if removed. So you can
+# ask AWStats to save last non corrupted file in a .bak file. This file is
+# stored in "DirData" directory with other 'historic files'.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+KeepBackupOfHistoricFiles=0
+
+
+# Default index page name for your web server.
+# Change : Effective for new updates only
+# Example: "index.php index.html default.html"
+# Default: "index.html"
+#
+DefaultFile="index.html"
+
+
+# Do not include access from clients that match following criteria.
+# If your log file contains IP addresses in host field, you must enter here
+# matching IP addresses criteria.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "SkipHosts" is "OnlyHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Example: "localhost REGEX[^.*\.localdomain$]"
+# Default: ""
+#
+SkipHosts="127.0.0.1"
+
+
+# Do not include access from clients with a user agent that match following
+# criteria. If you want to exclude a robot, you should update the robots.pm
+# file instead of this parameter.
+# The opposite parameter of "SkipUserAgents" is "OnlyUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "konqueror REGEX[ua_test_v\d\.\d]"
+# Default: ""
+#
+SkipUserAgents=""
+
+
+# Use SkipFiles to ignore access to URLs that match one of following entries.
+# You can enter a list of not important URLs (like framed menus, hidden pages,
+# etc...) to exclude them from statistics. You must enter here exact relative
+# URL as found in log file, or a matching REGEX value. Check apply on URL with
+# all its query paramaters.
+# For example, to ignore /badpage.php, just add "/badpage.php". To ignore all
+# pages in a particular directory, add "REGEX[^\/directorytoexclude]".
+# The opposite parameter of "SkipFiles" is "OnlyFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "/badpage.php /page.php?param=x REGEX[^\/excludedirectory]"
+# Default: ""
+#
+SkipFiles=""
+
+
+# Use SkipReferrersBlackList if you want to exclude records coming from a SPAM
+# referrer. Parameter must receive a local file name containing rules applied
+# on referrer field. If parameter is empty, no filter is applied.
+# An example of such a file is available in lib/blacklist.txt
+# You can download updated version at http://www.jayallen.org/comment_spam/
+# Change : Effective for new updates only
+# Example: "/mylibpath/blacklist.txt"
+# Default: ""
+#
+# WARNING!! Using this feature make AWStats running very slower (5 times slower
+# with black list file provided with AWStats !
+#
+SkipReferrersBlackList=""
+
+
+# Include in stats, only accesses from hosts that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular hosts, you can add those host names in
+# this parameter.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "OnlyHosts" is "SkipHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Default: ""
+#
+OnlyHosts=""
+
+
+# Include in stats, only accesses from user agent that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular browsers, you can add their user agents
+# string in this parameter.
+# The opposite parameter of "OnlyUserAgents" is "SkipUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "msie"
+# Default: ""
+#
+OnlyUserAgents=""
+
+
+# Include in stats, only accesses to URLs that match one of following entries.
+# For example, if you want AWStats to filter access to keep only stats that
+# match a particular string, like a particular directory, you can add this
+# directory name in this parameter.
+# The opposite parameter of "OnlyFiles" is "SkipFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "REGEX[marketing_directory] REGEX[office\/.*\.(csv|sxw)$]"
+# Default: ""
+#
+OnlyFiles=""
+
+
+# Add here a list of kind of url (file extension) that must be counted as
+# "Hit only" and not as a "Hit" and "Page/Download". You can set here all
+# image extensions as they are hit downloaded that must be counted but they
+# are not viewed pages. URLs with such extensions are not included in the TOP
+# Pages/URL report.
+# Note: If you want to exclude particular URLs from stats (No Pages and no
+# Hits reported), you must use SkipFiles parameter.
+# Change : Effective for new updates only
+# Example: "css js class gif jpg jpeg png bmp ico zip arj gz z wav mp3 wma mpg"
+# Example: ""
+# Default: "css js class gif jpg jpeg png bmp ico"
+#
+NotPageList="css js class gif jpg jpeg png bmp ico swf"
+
+
+# By default, AWStats considers that records found in web log file are
+# successful hits if HTTP code returned by server is a valid HTTP code (200
+# and 304). Any other code are reported in HTTP status chart.
+# Note that HTTP 'control codes', like redirection (302, 305) are not added by
+# default in this list as they are not pages seen by a visitor but are
+# protocol exchange codes to tell the browser to ask another page. Because
+# this other page will be counted and seen with a 200 or 304 code, if you 
+# add such codes, you will have 2 pages viewed reported for only one in facts.
+# Change : Effective for new updates only
+# Example: "200 304 302 305"
+# Default: "200 304"
+#
+ValidHTTPCodes="200 301 302 304"
+
+
+# By default, AWStats considers that records found in mail log file are
+# successful mail transfers if field that represent return code in analyzed
+# log file match values defined by this parameter.
+# Change : Effective for new updates only
+# Example: "1 250 200"
+# Default: "1 250"
+#
+ValidSMTPCodes="1 250"
+
+
+# Some web servers on some Operating systems (IIS-Windows) consider that a
+# login with same value but different case are the same login. To tell AWStats
+# to also consider them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+AuthenticatedUsersNotCaseSensitive=0
+
+
+# Some web servers on some Operating systems (IIS-Windows) considers that two
+# URLs with same value but different case are the same URL. To tell AWStats to
+# also considers them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+URLNotCaseSensitive=0
+
+
+# Keep or remove the anchor string you can find in some URLs.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+URLWithAnchor=0
+
+
+# In URL links, "?" char is used to add parameter's list in URLs. Syntax is:
+# /mypage.html?param1=value1&param2=value2
+# However, some servers/sites use also other chars to isolate dynamic part of
+# their URLs. You can complete this list with all such characters.
+# Change : Effective for new updates only
+# Example: "?;,"
+# Default: "?;"
+#
+URLQuerySeparators="?;"
+
+
+# Keep or remove the query string to the URL in the statistics for individual
+# pages. This is primarily used to differentiate between the URLs of dynamic
+# pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as two
+# different pages.
+# Warning, when set to 1, memory required to run AWStats is dramatically
+# increased if you have a lot of changing URLs (for example URLs with a random
+# id inside). Such web sites should not set this option to 1 or use seriously
+# the next parameter URLWithQueryWithOnlyFollowingParameters (or eventually 
+# URLWithQueryWithoutFollowingParameters).
+# Change : Effective for new updates only
+# Possible values:
+# 0 - URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used     (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLWithQuery=0
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to keep only parameters
+# you need (if you know them) before counting, manipulating and storing URL.
+# Enter here list of wanted parameters. For example, with "param", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithoutFollowingParameters.
+# Change : Effective for new updates only
+# Example: "param"
+# Default: ""
+# 
+URLWithQueryWithOnlyFollowingParameters=""
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to remove such parameters
+# from the URL before counting, manipulating and storing URL. Enter here list
+# of all non wanted parameters. For example if you enter "id", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithOnlyFollowingParameters.
+# Change : Effective for new updates only
+# Example: "PHPSESSID jsessionid"
+# Default: ""
+# 
+URLWithQueryWithoutFollowingParameters=""
+
+
+# Keep or remove the query string to the referrer URL in the statistics for
+# external referrer pages. This is used to differentiate between the URLs of
+# dynamic referrer pages. If set to 1, mypage.html?id=x and mypage.html?id=y
+# are counted as two different referrer pages.
+# Change : Effective for new updates only
+# Possible values:
+# 0 - Referrer URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used      (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLReferrerWithQuery=0
+
+
+# AWStats can detect setup problems or show you important informations to have
+# a better use. Keep this to 1, except if AWStats says you can change it.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 1
+#
+WarningMessages=1
+
+
+# When an error occurs, AWStats outputs a message related to errors. If you
+# want (in most cases for security reasons) to have no error messages, you
+# can set this parameter to your personalized generic message.
+# Change : Effective immediatly
+# Example: "An error occurred. Contact your Administrator"
+# Default: ""
+#
+ErrorMessages=""
+
+
+# AWStat can be run with debug=x parameter to output various informations
+# to help in debugging or solving troubles. If you want to allow this (not
+# enabled by default for security reasons), set this parameter to 0.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+DebugMessages=0
+
+
+# To help you to detect if your log format is good, AWStats reports an error
+# if all the first NbOfLinesForCorruptedLog lines have a format that does not
+# match the LogFormat parameter.
+# However, some worm virus attack on your web server can result in a very high
+# number of corrupted lines in your log. So if you experience awstats stop
+# because of bad virus records at the beginning of your log file, you can
+# increase this parameter (very rare).
+# Change : Effective for new updates only
+# Default: 50
+#
+NbOfLinesForCorruptedLog=50
+
+
+# For some particular integration needs, you may want to have CGI links to
+# point to another script than awstats.pl.
+# Use the name of this script in WrapperScript parameter.
+# Change : Effective immediatly
+# Example: "awstatslauncher.pl"
+# Default: ""
+#
+WrapperScript=""
+
+
+# DecodeUA must be set to 1 if you use Roxen web server. This server converts
+# all spaces in user agent field into %20. This make the AWStats robots, OS
+# and browsers detection fail in some cases. Just change it to 1 if and only
+# if your web server is Roxen.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+DecodeUA=0
+
+
+# MiscTrackerUrl can be used to make AWStats able to detect some miscellaneous
+# things, that can not be tracked on other way, like:
+# - Javascript disabled
+# - Java enabled
+# - Screen size
+# - Color depth
+# - Macromedia Director plugin
+# - Macromedia Shockwave plugin
+# - Realplayer G2 plugin
+# - QuickTime plugin
+# - Mediaplayer plugin
+# - Acrobat PDF plugin
+# To enable all these features, you must copy the awstats_misc_tracker.js file
+# into a /js/ directory stored in your web document root and add the following
+# HTML code at the end of your index page (but before </BODY>) :
+#
+# <script language=javascript src="/js/awstats_misc_tracker.js"></script>
+# <noscript><img src="/js/awstats_misc_tracker.js?nojs=y" height=0 width=0 border=0 style="display: none"></noscript>
+#
+# If code is not added in index page, all those detection capabilities will be
+# disabled. You must also check that ShowScreenSizeStats and ShowMiscStats
+# parameters are set to 1 to make results appear in AWStats report page.
+# If you want to use another directory than /js/, you must also change the
+# awstatsmisctrackerurl variable into the awstats_misc_tracker.js file.
+# Change : Effective for new updates only.
+# Possible value: URL of javascript tracker file added in your HTML code.
+# Default: "/js/awstats_misc_tracker.js"
+#
+MiscTrackerUrl="/js/awstats_misc_tracker.js"
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# The following values allow you to define accuracy of AWStats entities
+# (robots, browsers, os, referers, file types) detection.
+# It might be a good idea for large web sites or ISP that provides AWStats to
+# high number of customers, to set this parameter to 1 (or 0), instead of 2.
+# Possible values:
+#    0      = No detection,
+#    1      = Medium/Standard detection
+#    2      = Full detection
+# Change : Effective for new updates only
+# Note   : LevelForBrowsersDetection can also accept value "allphones". This
+#          enable detailed detection of phone/pda browsers.
+# Default: 2 (0 for LevelForWormsDetection)
+#
+LevelForBrowsersDetection=2         # 0 disables Browsers detection.
+                                    # 2 reduces AWStats speed by 2%
+                                    # allphones reduces AWStats speed by 5%
+LevelForOSDetection=2               # 0 disables OS detection.
+                                    # 2 reduces AWStats speed by 3%
+LevelForRefererAnalyze=2            # 0 disables Origin detection.
+                                    # 2 reduces AWStats speed by 14%
+LevelForRobotsDetection=2           # 0 disables Robots detection.
+                                    # 2 reduces AWStats speed by 2.5%
+LevelForSearchEnginesDetection=2    # 0 disables Search engines detection.
+                                    # 2 reduces AWStats speed by 9%
+LevelForKeywordsDetection=2         # 0 disables Keyphrases/Keywords detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForFileTypesDetection=2        # 0 disables File types detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForWormsDetection=0            # 0 disables Worms detection.
+                                    # 2 reduces AWStats speed by 15%
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When you use AWStats as a CGI, you can have the reports shown in HTML frames.
+# Frames are only available for report viewed dynamically. When you build
+# pages from command line, this option is not used and no frames are built.
+# Possible values: 0 or 1
+# Default: 1
+#
+UseFramesWhenCGI=1
+
+
+# This parameter asks your browser to open detailed reports into a different
+# window than the main page.
+# Possible values:
+# 0 - Open all in same browser window
+# 1 - Open detailed reports in another window except if using frames
+# 2 - Open always in a different window even if reports are framed
+# Default: 1
+#
+DetailedReportsOnNewWindows=1
+
+
+# You can add, in the HTML report page, a cache lifetime (in seconds) that
+# will be returned to the browser in HTTP header answer by server.
+# This parameter is not used when reports are built with -staticlinks option.
+# Example: 3600
+# Default: 0
+#
+Expires=3600
+
+
+# To avoid too large web pages, you can ask AWStats to limit number of rows of
+# all reported charts to this number when no other limits apply.
+# Default: 1000
+#
+MaxRowsInHTMLOutput=1000
+
+
+# Set your primary language (ISO-639-1 language codes).
+# Possible values:
+#  Albanian=al, Bosnian=ba, Bulgarian=bg, Catalan=ca,
+#  Chinese (Taiwan)=tw, Chinese (Simpliefied)=cn, Croatian=hr, Czech=cz,
+#  Danish=dk, Dutch=nl, English=en, Estonian=et, Euskara=eu, Finnish=fi,
+#  French=fr, Galician=gl, German=de, Greek=gr, Hebrew=he, Hungarian=hu,
+#  Icelandic=is, Indonesian=id, Italian=it, Japanese=jp, Korean=ko,
+#  Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl,
+#  Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru,
+#  Serbian=sr, Slovak=sk, Slovenian=si, Spanish=es, Swedish=se, Turkish=tr,
+#  Ukrainian=ua, Welsh=cy.
+#  First available language accepted by browser=auto
+# Default: "auto"
+#
+Lang="auto"
+
+
+# Set the location of language files.
+# Example: "/usr/share/awstats/lang"
+# Default: "./lang" (means lang directory is in same location than awstats.pl)
+#
+DirLang="./lang"
+
+
+# Show menu header with reports' links
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowMenu=1					
+
+
+# You choose here which reports you want to see in the main page and what you
+# want to see in those reports.
+# Possible values:
+#  0  - Report is not shown at all
+#  1  - Report is shown in main page with an entry in menu and default columns
+# XYZ - Report shows column informations defined by code X,Y,Z...
+#       X,Y,Z... are code letters among the following:
+#        U = Unique visitors
+#        V = Visits
+#        P = Number of pages
+#        H = Number of hits (or mails)
+#        B = Bandwith (or total mail size for mail logs)
+#        L = Last access date
+#        E = Entry pages
+#        X = Exit pages
+#        C = Web compression (mod_gzip,mod_deflate)
+#        M = Average mail size (mail logs)
+#
+
+# Show monthly summary
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowSummary=UVPHB
+
+# Show monthly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowMonthStats=UVPHB
+
+# Show days of month chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: VPHB, Possible column codes: VPHB
+ShowDaysOfMonthStats=VPHB
+
+# Show days of week chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDaysOfWeekStats=PHB
+
+# Show hourly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowHoursStats=PHB
+
+# Show domains/country chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDomainsStats=PHB
+
+# Show hosts chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHBL, Possible column codes: PHBL
+ShowHostsStats=PHBL
+
+# Show authenticated users chart
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHBL
+ShowAuthenticatedUsers=0
+
+# Show robots chart
+# Context: Web, Streaming
+# Default: HBL, Possible column codes: HBL
+ShowRobotsStats=HBL
+
+# Show worms chart
+# Context: Web, Streaming
+# Default: 0 (If set to other than 0, see also LevelForWormsDetection), Possible column codes: HBL
+ShowWormsStats=0
+
+# Show email senders chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailSenders=0
+
+# Show email receivers chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailReceivers=0
+
+# Show session chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowSessionsStats=1
+
+# Show pages-url chart.
+# Context: Web, Streaming, Ftp
+# Default: PBEX, Possible column codes: PBEX
+ShowPagesStats=PBEX
+
+# Show file types chart.
+# Context: Web, Streaming, Ftp
+# Default: HB, Possible column codes: HBC
+ShowFileTypesStats=HB
+
+# Show file size chart (Not yet available)
+# Context: Web, Streaming, Mail, Ftp
+# Default: 1, Possible column codes: None
+ShowFileSizesStats=0		
+
+# Show operating systems chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowOSStats=1
+
+# Show browsers chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowBrowsersStats=1
+
+# Show screen size chart
+# Context: Web, Streaming
+# Default: 0 (If set to 1, see also MiscTrackerUrl), Possible column codes: None
+ShowScreenSizeStats=0
+
+# Show origin chart
+# Context: Web, Streaming
+# Default: PH, Possible column codes: PH
+ShowOriginStats=PH
+
+# Show keyphrases chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeyphrasesStats=1
+
+# Show keywords chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeywordsStats=1
+
+# Show misc chart
+# Context: Web, Streaming
+# Default: a (See also MiscTrackerUrl parameter), Possible column codes: anjdfrqwp
+ShowMiscStats=a
+
+# Show http errors chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowHTTPErrorsStats=1
+
+# Show smtp errors chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: None
+ShowSMTPErrorsStats=0
+
+# Show the cluster report (Your LogFormat must contains the %cluster tag)
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHB
+ShowClusterStats=0
+
+
+# Some graphical reports are followed by the data array of values.
+# If you don't want this array (to reduce the report size for example), you
+# can set thoose options to 0.
+# Possible values: 0 or 1
+# Default: 1
+#
+# Data array values for the ShowMonthStats report
+AddDataArrayMonthStats=1
+# Data array values for the ShowDaysOfMonthStats report
+AddDataArrayShowDaysOfMonthStats=1
+# Data array values for the ShowDaysOfWeekStats report
+AddDataArrayShowDaysOfWeekStats=1
+# Data array values for the ShowHoursStats report
+AddDataArrayShowHoursStats=1
+
+
+# In the Origin chart, you have stats on where your hits came from. You can
+# include hits on pages that come from pages of same sites in this chart.
+# Possible values: 0 or 1
+# Default: 0
+#
+IncludeInternalLinksInOriginSection=0
+
+
+# The following parameters can be used to choose the maximum number of lines
+# shown for the particular following reports.
+#
+# Stats by countries/domains
+MaxNbOfDomain = 10
+MinHitDomain  = 1
+# Stats by hosts
+MaxNbOfHostsShown = 10
+MinHitHost    = 1
+# Stats by authenticated users
+MaxNbOfLoginShown = 10
+MinHitLogin   = 1
+# Stats by robots
+MaxNbOfRobotShown = 10
+MinHitRobot   = 1
+# Stats by pages
+MaxNbOfPageShown = 10
+MinHitFile    = 1
+# Stats by OS
+MaxNbOfOsShown = 10
+MinHitOs      = 1
+# Stats by browsers
+MaxNbOfBrowsersShown = 10
+MinHitBrowser = 1
+# Stats by screen size
+MaxNbOfScreenSizesShown = 5
+MinHitScreenSize = 1
+# Stats by window size (following 2 parameters are not yet used)
+MaxNbOfWindowSizesShown = 5
+MinHitWindowSize = 1
+# Stats by referers
+MaxNbOfRefererShown = 10
+MinHitRefer   = 1
+# Stats for keyphrases
+MaxNbOfKeyphrasesShown = 10
+MinHitKeyphrase = 1
+# Stats for keywords
+MaxNbOfKeywordsShown = 10
+MinHitKeyword = 1
+# Stats for sender or receiver emails
+MaxNbOfEMailsShown = 20
+MinHitEMail   = 1
+
+
+# Choose if you want the week report to start on sunday or monday
+# Possible values:
+# 0 - Week starts on sunday
+# 1 - Week starts on monday
+# Default: 1
+#
+FirstDayOfWeek=1
+
+
+# List of visible flags that link to other language translations.
+# See Lang parameter for list of allowed flag/language codes.
+# If you don't want any flag link, set ShowFlagLinks to "".
+# This parameter is used only if ShowMenu parameter is set to 1.
+# Possible values: "" or "language_codes_separated_by_space"
+# Example: "en es fr nl de"
+# Default: ""
+#
+ShowFlagLinks=""
+
+
+# Each URL, shown in stats report views, are links you can click.
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowLinksOnUrl=1
+
+
+# When AWStats builds HTML links in its report pages, it starts those links
+# with "http://". However some links might be HTTPS links, so you can enter
+# here the root of all your HTTPS links. If all your site is a SSL web site,
+# just enter "/".
+# This parameter is not used if ShowLinksOnUrl is 0.
+# Example: "/shopping"
+# Example: "/"
+# Default: ""
+#
+UseHTTPSLinkForUrl=""
+
+
+# Maximum length of URL part shown on stats page (number of characters).
+# This affects only URL visible text, links still work.
+# Default: 64
+#
+MaxLengthOfShownURL=64
+
+
+# You can enter HTML code that will be added at the top of AWStats reports.
+# Default: ""
+#
+HTMLHeadSection=""
+
+
+# You can enter HTML code that will be added at the end of AWStats reports.
+# Great to add advert ban.
+# Default: ""
+#
+HTMLEndSection=""
+
+
+# You can set Logo and LogoLink to use your own logo.
+# Logo must be the name of image file (must be in $DirIcons/other directory).
+# LogoLink is the expected URL when clicking on Logo.
+# Default: "awstats_logo6.png"
+#
+Logo="awstats_logo6.png"
+LogoLink="http://awstats.sourceforge.net"
+
+
+# Value of maximum bar width/height for horizontal/vertical HTML graphics bars.
+# Default: 260/90
+#
+BarWidth   = 260
+BarHeight  = 90
+
+
+# You can ask AWStats to use a particular CSS (Cascading Style Sheet) to
+# change its look. To create a style sheet, you can use samples provided with
+# AWStats in wwwroot/css directory.
+# Example: "/awstatscss/awstats_bw.css"
+# Example: "/css/awstats_bw.css"
+# Default: ""
+#
+StyleSheet=""
+
+
+# Those color parameters can be used (if StyleSheet parameter is not used)
+# to change AWStats look.
+# Example: color_name="RRGGBB"	# RRGGBB is Red Green Blue components in Hex
+#
+color_Background="FFFFFF"		# Background color for main page (Default = "FFFFFF")
+color_TableBGTitle="CCCCDD"		# Background color for table title (Default = "CCCCDD")
+color_TableTitle="000000"		# Table title font color (Default = "000000")
+color_TableBG="CCCCDD"			# Background color for table (Default = "CCCCDD")
+color_TableRowTitle="FFFFFF"	# Table row title font color (Default = "FFFFFF")
+color_TableBGRowTitle="ECECEC"	# Background color for row title (Default = "ECECEC")
+color_TableBorder="ECECEC"		# Table border color (Default = "ECECEC")
+color_text="000000"				# Color of text (Default = "000000")
+color_textpercent="606060"		# Color of text for percent values (Default = "606060")
+color_titletext="000000"		# Color of text title within colored Title Rows (Default = "000000")
+color_weekend="EAEAEA"			# Color for week-end days (Default = "EAEAEA")
+color_link="0011BB"				# Color of HTML links (Default = "0011BB")
+color_hover="605040"			# Color of HTML on-mouseover links (Default = "605040") 
+color_u="FFAA66"				# Background color for number of unique visitors (Default = "FFAA66")
+color_v="F4F090"				# Background color for number of visites (Default = "F4F090")
+color_p="4477DD"				# Background color for number of pages (Default = "4477DD")
+color_h="66DDEE"				# Background color for number of hits (Default = "66DDEE")
+color_k="2EA495"				# Background color for number of bytes (Default = "2EA495")
+color_s="8888DD"				# Background color for number of search (Default = "8888DD")
+color_e="CEC2E8"				# Background color for number of entry pages (Default = "CEC2E8")
+color_x="C1B2E2"				# Background color for number of exit pages (Default = "C1B2E2")
+
+
+
+#-----------------------------------------------------------------------------
+# PLUGINS
+#-----------------------------------------------------------------------------
+
+# Add here all plugin files you want to load.
+# Plugin files must be .pm files stored in 'plugins' directory.
+# Uncomment LoadPlugin lines to enable a plugin after checking that perl
+# modules required by the plugin are installed.
+
+# Plugin: Tooltips
+# Perl modules required: None
+# Add some tooltips help on HTML report pages.
+# Note that enabling this kind of help will increased HTML report pages size,
+# so server load and bandwidth.
+#
+LoadPlugin="tooltips"
+
+# Plugin: DecodeUTFKeys
+# Perl modules required: Encode and URI::Escape
+# Allow AWStats to show correctly (in language charset) keywords/keyphrases
+# strings even if they were UTF8 coded by the referer search engine.
+#
+#LoadPlugin="decodeutfkeys"
+
+# Plugin: IPv6
+# Perl modules required: Net::IP and Net::DNS
+# This plugin gives AWStats capability to make reverse DNS lookup on IPv6
+# addresses.
+# Note: If you are interested in having country report, you should use the
+# geoipfree or geoip plugin instead of enabled reverse DNS lookup.
+#
+#LoadPlugin="ipv6"
+
+# Plugin: HashFiles
+# Perl modules required: Storable
+# AWStats DNS cache files are read/saved as native hash files. This increases
+# DNS cache files loading speed, above all for very large web sites.
+#
+LoadPlugin="hashfiles"
+
+# Plugin: GeoIP
+# Perl modules required: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IP module 
+# from Maxmind, database more up to date) or the GeoIPfree plugin (need
+# Perl Geo::IPfree module, database less up to date).
+# This plugin reduces AWStats speed of 8% !
+#
+LoadPlugin="geoip GEOIP_STANDARD /usr/share/GeoIP/GeoIP.dat"
+
+# Plugin: GeoIPfree
+# Perl modules required: Geo::IPfree version 0.2+ (from Graciliano M.P.)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IPfree
+# module, database less up to date) or the GeoIP plugin (need Perl Geo::IP
+# module from Maxmind, database more up to date).
+# Note: Activestate provide a corrupted version of Geo::IPfree 0.2 Perl
+# module, so install it from elsewhere (from www.cpan.org for example).
+# This plugin reduces AWStats speed of 10% !
+#
+#LoadPlugin="geoipfree"
+
+# Plugin: GeoIP_Region_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by regions. Only regions for US and 
+# Canada can be detected.
+# Note: This plugin need Maxmind GeoIP Perl module AND the region database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Region database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_region_maxmind GEOIP_STANDARD /pathto/GeoIPRegion.dat"
+
+# Plugin: GeoIP_City_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by cities (with country and regions
+# informations for major countries).
+# Note: This plugin need Maxmind GeoIP Perl module AND the city database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the City database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /pathto/GeoIPCity.dat"
+
+# Plugin: GeoIP_ISP_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by ISP.
+# Note: This plugin need Maxmind GeoIP Perl module AND the ISP database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the ISP database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_isp_maxmind GEOIP_STANDARD /pathto/GeoIPISP.dat"
+
+# Plugin: GeoIP_Org_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by Organization name
+# Note: This plugin need Maxmind GeoIP Perl module AND the Org database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Org database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_org_maxmind GEOIP_STANDARD /pathto/GeoIPOrg.dat"
+
+# Plugin: UserInfo
+# Perl modules required: None
+# Add a text (Firtname, Lastname, Office Department, ...) in authenticated user
+# reports for each login value.
+# A text file called userinfo.myconfig.txt, with two fields (first is login,
+# second is text to show, separated by a tab char) must be created in DirData
+# directory.
+#
+#LoadPlugin="userinfo"
+
+# Plugin: HostInfo
+# Perl modules required: Net::XWhois
+# Add a column into host chart with a link to open a popup window that shows
+# info on host (like whois records).
+#
+#LoadPlugin="hostinfo"
+
+# Plugin: ClusterInfo
+# Perl modules required: None
+# Add a text (for example a full hostname) in cluster reports for each cluster
+# number.
+# A text file called clusterinfo.myconfig.txt, with two fields (first is
+# cluster number, second is text to show) separated by a tab char. must be
+# created into DirData directory.
+# Note this plugin is useless if ShowClusterStats is set to 0 or if you don't
+# use a personalized log format that contains %cluster tag.
+#
+#LoadPlugin="clusterinfo"
+
+# Plugin: UrlAliases
+# Perl modules required: None
+# Add a text (Page title, description...) in URL reports before URL value.
+# A text file called urlalias.myconfig.txt, with two fields (first is URL,
+# second is text to show, separated by a tab char) must be created into
+# DirData directory.
+#
+#LoadPlugin="urlalias"
+
+# Plugin: TimeHiRes
+# Perl modules required: Time::HiRes (if Perl < 5.8)
+# Time reported by -showsteps option is in millisecond. For debug purpose.
+#
+#LoadPlugin="timehires"		
+
+# Plugin: TimeZone
+# Perl modules required: Time::Local
+# Allow AWStats to correct a bad timezone for user of some IIS that use
+# GMT date in its log instead of local server time.
+# This module is useless for Apache and most IIS version.
+# This plugin reduces AWStats speed of 40% !!!!!!!
+#
+#LoadPlugin="timezone +2"
+
+# Plugin: Rawlog
+# Perl modules required: None
+# This plugin adds a form in AWStats main page to allow users to see raw
+# content of current log files. A filter is also available.
+#
+#LoadPlugin="rawlog"
+
+# Plugin: GraphApplet
+# Perl modules required: None
+# Supported charts are built by a 3D graphic applet.
+#
+#LoadPlugin="graphapplet /awstatsclasses"				# EXPERIMENTAL FEATURE
+
+
+
+#-----------------------------------------------------------------------------
+# EXTRA SECTIONS
+#-----------------------------------------------------------------------------
+
+# You can define your own charts, you choose here what are rows and columns
+# keys. This feature is particularly useful for marketing purpose, tracking
+# products orders for example.
+# For this, edit all parameters of Extra section. Each set of parameter is a
+# different chart. For several charts, duplicate section changing the number.
+# Note: Each Extra section reduces AWStats speed by 8%.
+#
+# WARNING: A wrong setup of Extra section might result in too large arrays
+# that will consume all your memory, making AWStats unusable after several
+# updates, so be sure to setup it correctly.
+# In most cases, you don't need this feature.
+#
+# ExtraSectionNameX is title of your personalized chart.
+# ExtraSectionCodeFilterX is list of codes the record code field must match.
+#   Put an empty string for no test on code.
+# ExtraSectionConditionX are conditions you can use to count or not the hit,
+#   Use one of the field condition
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,extraX)
+#   and a regex to match, after a coma. Use "||" for "OR".
+# ExtraSectionFirstColumnTitleX is the first column title of the chart.
+# ExtraSectionFirstColumnValuesX is a string to tell AWStats which field to
+#   extract value from
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,VHOST,extraX)
+#   and how to extract the value (using regex syntax). Each different value
+#   found will appear in first column of report on a different row. Be sure
+#   that list of different possible values will not grow indefinitely.
+# ExtraSectionFirstColumnFormatX is the string used to write value.
+# ExtraSectionStatTypesX are things you want to count. You can use standard
+#   code letters (P for pages,H for hits,B for bandwidth,L for last access).
+# ExtraSectionAddAverageRowX add a row at bottom of chart with average values.
+# ExtraSectionAddSumRowX add a row at bottom of chart with sum values.
+# MaxNbOfExtraX is maximum number of rows shown in chart.
+# MinHitExtraX is minimum number of hits required to be shown in chart.
+#
+
+# Example to report the 20 products the most ordered by "order.cgi" script
+#ExtraSectionName1="Product orders"
+#ExtraSectionCodeFilter1="200 304"
+#ExtraSectionCondition1="URL,\/cgi\-bin\/order\.cgi||URL,\/cgi\-bin\/order2\.cgi"
+#ExtraSectionFirstColumnTitle1="Product ID"
+#ExtraSectionFirstColumnValues1="QUERY_STRING,productid=([^&]+)"
+#ExtraSectionFirstColumnFormat1="%s"
+#ExtraSectionStatTypes1=PL
+#ExtraSectionAddAverageRow1=0
+#ExtraSectionAddSumRow1=1
+#MaxNbOfExtra1=20
+#MinHitExtra1=1
+
+
+# There is also a global parameter ExtraTrackedRowsLimit that limits the
+# number of possible rows an ExtraSection can report. This parameter is
+# here to protect too much memory use when you make a bad setup in your
+# ExtraSection. It applies to all ExtraSection independently meaning that
+# none ExtraSection can report more rows than value defined by ExtraTrackedRowsLimit.
+# If you know an ExtraSection will report more rows than its value, you should
+# increase this parameter or AWStats will stop with an error.
+# Example: 2000
+# Default: 500
+#
+ExtraTrackedRowsLimit=500
+
+
+#-----------------------------------------------------------------------------
+# INCLUDES
+#-----------------------------------------------------------------------------
+
+# You can include other config files using the directive with the name of the
+# config file.
+# This is particularly useful for users who have a lot of virtual servers, so
+# a lot of config files and want to maintain common values in only one file.
+# Note that when a variable is defined both in a config file and in an
+# included file, AWStats will use the last value read for parameters that
+# contains one value and AWStats will concat all values from both files for
+# parameters that are lists of values.
+#
+
+#Include ""
+
diff --git a/modules/awstats/files/awstats.mirrors.fedoraproject.org.conf b/modules/awstats/files/awstats.mirrors.fedoraproject.org.conf
index 6491e97..3a36c6e 100644
--- a/modules/awstats/files/awstats.mirrors.fedoraproject.org.conf
+++ b/modules/awstats/files/awstats.mirrors.fedoraproject.org.conf
@@ -584,7 +584,7 @@ NotPageList="css js class gif jpg jpeg png bmp ico swf"
 # Example: "200 304 302 305"
 # Default: "200 304"
 #
-ValidHTTPCodes="200 302 304"
+ValidHTTPCodes="200 301 302 304"

 # By default, AWStats considers that records found in mail log file are

commit da2b3ab5ac58fe87687c1fda1703c4b613eeaf4b
Author: Ricky Zhou <[email-masked]>
Date:   Fri Jul 18 23:10:36 2008 +0000

    For mirrors.fp.o, 302s are useful.

diff --git a/modules/awstats/files/awstats.mirrors.fedoraproject.org.conf b/modules/awstats/files/awstats.mirrors.fedoraproject.org.conf
index 2e12a80..6491e97 100644
--- a/modules/awstats/files/awstats.mirrors.fedoraproject.org.conf
+++ b/modules/awstats/files/awstats.mirrors.fedoraproject.org.conf
@@ -584,7 +584,7 @@ NotPageList="css js class gif jpg jpeg png bmp ico swf"
 # Example: "200 304 302 305"
 # Default: "200 304"
 #
-ValidHTTPCodes="200 304"
+ValidHTTPCodes="200 302 304"

 # By default, AWStats considers that records found in mail log file are

commit 0d5cc5ee3e7a973c9bf341f37f8580786141460e
Author: Ricky Zhou <[email-masked]>
Date:   Fri Jul 18 23:08:34 2008 +0000

    Add index.html (should make the repeated stuff into a function).

diff --git a/modules/awstats/files/awstats.cron b/modules/awstats/files/awstats.cron
index a176a9b..abb0a19 100755
--- a/modules/awstats/files/awstats.cron
+++ b/modules/awstats/files/awstats.cron
@@ -3,15 +3,19 @@
 # fedoraproject.org
 mkdir -p /var/www/html/awstats/fedoraproject.org
 /usr/share/awstats/tools/awstats_buildstaticpages.pl -config=fedoraproject.org -update -dir=/var/www/html/awstats/fedoraproject.org > /dev/null
+ln -sf /var/www/html/awstats/fedoraproject.org/awstats.fedoraproject.org.html  /var/www/html/awstats/fedoraproject.org/index.html
 
 # docs.fedoraproject.org
 mkdir -p /var/www/html/awstats/docs.fedoraproject.org
 /usr/share/awstats/tools/awstats_buildstaticpages.pl -config=docs.fedoraproject.org -update -dir=/var/www/html/awstats/docs.fedoraproject.org > /dev/null
+ln -sf /var/www/html/awstats/docs.fedoraproject.org/awstats.docs.fedoraproject.org.html  /var/www/html/awstats/docs.fedoraproject.org/index.html
 
 # mirrors.fedoraproject.org
 mkdir -p /var/www/html/awstats/mirrors.fedoraproject.org
 /usr/share/awstats/tools/awstats_buildstaticpages.pl -config=mirrors.fedoraproject.org -update -dir=/var/www/html/awstats/mirrors.fedoraproject.org > /dev/null
+ln -sf /var/www/html/awstats/mirrors.fedoraproject.org/awstats.mirrors.fedoraproject.org.html  /var/www/html/awstats/mirrors.fedoraproject.org/index.html
 
 # translate.fedoraproject.org
 mkdir -p /var/www/html/awstats/translate.fedoraproject.org
 /usr/share/awstats/tools/awstats_buildstaticpages.pl -config=translate.fedoraproject.org -update -dir=/var/www/html/awstats/translate.fedoraproject.org > /dev/null
+ln -sf /var/www/html/awstats/translate.fedoraproject.org/awstats.translate.fedoraproject.org.html  /var/www/html/awstats/translate.fedoraproject.org/index.html

commit 9d9d7ef3108aa5d35d787d7585c8354ea5b1a7fd
Author: Ricky Zhou <[email-masked]>
Date:   Fri Jul 18 20:44:23 2008 +0000

    Fix typo.

diff --git a/configs/dns/master/fedoraproject.org b/configs/dns/master/fedoraproject.org
index 0f425df..1ab4988 100644
--- a/configs/dns/master/fedoraproject.org
+++ b/configs/dns/master/fedoraproject.org
@@ -1,6 +1,6 @@
 $TTL 3600
 @                IN        SOA     fedoraproject.org.        hostmaster.fedoraproject.org. (
-                        2008071801 ; Serial
+                        2008071802 ; Serial
                         8H ; refresh
                         2H ; retry
                         4W ; expire
@@ -91,7 +91,7 @@ mx2             IN    A     66.187.237.31
 mx3             IN    A     66.187.233.32
 noc2            IN    A     66.35.62.164
 ns1             IN    A     64.34.184.179
-ols             IN    A     fedorapeople.org.
+ols             IN    CNAME fedorapeople.org.
 people1         IN    A     152.3.220.168
 people          IN    CNAME fedorapeople.org.
 pki             IN    CNAME cvs.nscp.hosted.redhat.com.

commit 86609142790cf33e58c01a71bd1082ccf78edfa7
Author: Mike McGrath <[email-masked]>
Date:   Fri Jul 18 20:13:55 2008 +0000

    Added OLS for their new site

diff --git a/configs/dns/master/fedoraproject.org b/configs/dns/master/fedoraproject.org
index 6e1ca69..0f425df 100644
--- a/configs/dns/master/fedoraproject.org
+++ b/configs/dns/master/fedoraproject.org
@@ -1,6 +1,6 @@
 $TTL 3600
 @                IN        SOA     fedoraproject.org.        hostmaster.fedoraproject.org. (
-                        2008062701 ; Serial
+                        2008071801 ; Serial
                         8H ; refresh
                         2H ; retry
                         4W ; expire
@@ -91,6 +91,7 @@ mx2             IN    A     66.187.237.31
 mx3             IN    A     66.187.233.32
 noc2            IN    A     66.35.62.164
 ns1             IN    A     64.34.184.179
+ols             IN    A     fedorapeople.org.
 people1         IN    A     152.3.220.168
 people          IN    CNAME fedorapeople.org.
 pki             IN    CNAME cvs.nscp.hosted.redhat.com.

commit ad423247ccd336008bee4046fe5e751555f5e886
Author: Mike McGrath <[email-masked]>
Date:   Fri Jul 18 20:06:47 2008 +0000

    Exception for John Lockhart
    
    Enabling the group quota to be bigger then the user quota proved to not do what I'd hoped it would.  We'll have to re-think this long term but in the short-term this will work for the OLS papers.

diff --git a/configs/system/fedorapeople/set-quotas-for-all.cron b/configs/system/fedorapeople/set-quotas-for-all.cron
index d82dbc7..a9353bc 100644
--- a/configs/system/fedorapeople/set-quotas-for-all.cron
+++ b/configs/system/fedorapeople/set-quotas-for-all.cron
@@ -4,25 +4,14 @@ softblock='150000' #150M
 hardfile='0' # no limit on number of files (duh)
 softfile='0' # no limit on number of files
 
-grouphardblock='500000' # 500M
-groupsoftblock='400000' # 400M
-
-# Groups listed one by one for sanity as well as control/monitoring
-groups='ols sysadmin'
-
 users=`getent passwd | cut -d: -f1,6 | grep '/home/fedora/' | cut -d: -f1`
 for user in $users
    do
     user=`basename $user`
-    if /usr/bin/quota $user| grep -q ': none'; then
+    if [ $user == 'lockhart' ]; then
+        /usr/sbin/setquota -u $user $softblock 400000 $softfile $hardfile /srv
+    elif /usr/bin/quota $user| grep -q ': none'; then
           /usr/sbin/setquota -u $user $softblock $hardblock $softfile $hardfile /srv
     fi
    done
 
-
-for group in $groups
-   do
-    if /usr/bin/quota -g $group | grep -q ': none'; then
-        /usr/sbin/setquota -g $group $groupsoftblock $grouphardblock $softfile $hardfile /srv
-    fi
-   done

commit 5aaf4f9e56ebac330cd37ebc892b241c09889c53
Author: Mike McGrath <[email-masked]>
Date:   Fri Jul 18 15:22:04 2008 +0000

    Adding some initial group quota abilities

diff --git a/configs/system/fedorapeople/set-quotas-for-all.cron b/configs/system/fedorapeople/set-quotas-for-all.cron
index 8c5f409..d82dbc7 100644
--- a/configs/system/fedorapeople/set-quotas-for-all.cron
+++ b/configs/system/fedorapeople/set-quotas-for-all.cron
@@ -4,6 +4,12 @@ softblock='150000' #150M
 hardfile='0' # no limit on number of files (duh)
 softfile='0' # no limit on number of files
 
+grouphardblock='500000' # 500M
+groupsoftblock='400000' # 400M
+
+# Groups listed one by one for sanity as well as control/monitoring
+groups='ols sysadmin'
+
 users=`getent passwd | cut -d: -f1,6 | grep '/home/fedora/' | cut -d: -f1`
 for user in $users
    do
@@ -12,3 +18,11 @@ for user in $users
           /usr/sbin/setquota -u $user $softblock $hardblock $softfile $hardfile /srv
     fi
    done
+
+
+for group in $groups
+   do
+    if /usr/bin/quota -g $group | grep -q ': none'; then
+        /usr/sbin/setquota -g $group $groupsoftblock $grouphardblock $softfile $hardfile /srv
+    fi
+   done

commit 31dd9638fde42014f1fff5ae98396ebe0b7f6170
Author: Ricky Zhou <[email-masked]>
Date:   Fri Jul 18 08:45:05 2008 +0000

    script => file

diff --git a/modules/awstats/manifests/init.pp b/modules/awstats/manifests/init.pp
index 02696b9..66c9e8c 100644
--- a/modules/awstats/manifests/init.pp
+++ b/modules/awstats/manifests/init.pp
@@ -12,7 +12,8 @@ class awstats::base {
         replace => false,
     }
 
-    script { '/etc/cron.hourly/awstats':
+    file { '/etc/cron.hourly/awstats':
+        mode => 0755,
         source => 'puppet:///awstats/awstats.cron',
     }

commit 3b8768576f5819c0c2e4a9ba7a447d9d7a25960e
Author: Ricky Zhou <[email-masked]>
Date:   Fri Jul 18 08:40:28 2008 +0000

    Try a few more hosts...

diff --git a/modules/awstats/files/awstats.cron b/modules/awstats/files/awstats.cron
index fab3149..a176a9b 100755
--- a/modules/awstats/files/awstats.cron
+++ b/modules/awstats/files/awstats.cron
@@ -4,3 +4,14 @@
 mkdir -p /var/www/html/awstats/fedoraproject.org
 /usr/share/awstats/tools/awstats_buildstaticpages.pl -config=fedoraproject.org -update -dir=/var/www/html/awstats/fedoraproject.org > /dev/null
 
+# docs.fedoraproject.org
+mkdir -p /var/www/html/awstats/docs.fedoraproject.org
+/usr/share/awstats/tools/awstats_buildstaticpages.pl -config=docs.fedoraproject.org -update -dir=/var/www/html/awstats/docs.fedoraproject.org > /dev/null
+
+# mirrors.fedoraproject.org
+mkdir -p /var/www/html/awstats/mirrors.fedoraproject.org
+/usr/share/awstats/tools/awstats_buildstaticpages.pl -config=mirrors.fedoraproject.org -update -dir=/var/www/html/awstats/mirrors.fedoraproject.org > /dev/null
+
+# translate.fedoraproject.org
+mkdir -p /var/www/html/awstats/translate.fedoraproject.org
+/usr/share/awstats/tools/awstats_buildstaticpages.pl -config=translate.fedoraproject.org -update -dir=/var/www/html/awstats/translate.fedoraproject.org > /dev/null
diff --git a/modules/awstats/files/awstats.docs.fedoraproject.org.conf b/modules/awstats/files/awstats.docs.fedoraproject.org.conf
new file mode 100644
index 0000000..00cf9a5
--- /dev/null
+++ b/modules/awstats/files/awstats.docs.fedoraproject.org.conf
@@ -0,0 +1,1499 @@
+# AWSTATS CONFIGURE FILE 6.6
+#-----------------------------------------------------------------------------
+# Copy this file into awstats.www.mydomain.conf and edit this new config file
+# to setup AWStats (See documentation in docs/ directory).
+# The config file must be in /etc/awstats, /usr/local/etc/awstats or /etc (for
+# Unix/Linux) or same directory than awstats.pl (Windows, Mac, Unix/Linux...)
+# To include an environment variable in any parameter (AWStats will replace
+# it with its value when reading it), follow the example:
+# Parameter="__ENVNAME__"
+# Note that environment variable AWSTATS_CURRENT_CONFIG is always defined with
+# the config value in an AWStats running session and can be used like others.
+#-----------------------------------------------------------------------------
+# $Revision: 1.327 $ - $Author: eldy $ - $Date: 2006/04/21 22:28:49 $
+
+
+
+#-----------------------------------------------------------------------------
+# MAIN SETUP SECTION (Required to make AWStats work)
+#-----------------------------------------------------------------------------
+
+# "LogFile" contains the web, ftp or mail server log file to analyze.
+# Possible values: A full path, or a relative path from awstats.pl directory.
+# Example: "/var/log/apache/access.log"
+# Example: "../logs/mycombinedlog.log"
+# You can also use tags in this filename if you need a dynamic file name
+# depending on date or time (Replacement is made by AWStats at the beginning
+# of its execution). This is available tags :
+#   %YYYY-n  is replaced with 4 digits year we were n hours ago
+#   %YY-n    is replaced with 2 digits year we were n hours ago
+#   %MM-n    is replaced with 2 digits month we were n hours ago
+#   %MO-n    is replaced with 3 letters month we were n hours ago
+#   %DD-n    is replaced with day we were n hours ago
+#   %HH-n    is replaced with hour we were n hours ago
+#   %NS-n    is replaced with number of seconds at 00:00 since 1970
+#   %WM-n    is replaced with the week number in month (1-5)
+#   %Wm-n    is replaced with the week number in month (0-4)
+#   %WY-n    is replaced with the week number in year (01-52)
+#   %Wy-n    is replaced with the week number in year (00-51)
+#   %DW-n    is replaced with the day number in week (1-7, 1=sunday)
+#                              use n=24 if you need (1-7, 1=monday)
+#   %Dw-n    is replaced with the day number in week (0-6, 0=sunday)
+#                              use n=24 if you need (0-6, 0=monday)
+#   Use 0 for n if you need current year, month, day, hour...
+# Example: "/var/log/access_log.%YYYY-0%MM-0%DD-0.log"
+# Example: "C:/WINNT/system32/LogFiles/W3SVC1/ex%YY-24%MM-24%DD-24.log"
+# You can also use a pipe if log file come from a pipe :
+# Example: "gzip -d </var/log/apache/access.log.gz |"
+# If there are several log files from load balancing servers :
+# Example: "/pathtotools/logresolvemerge.pl *.log |"
+#
+LogFile="/usr/share/awstats/tools/logresolvemerge.pl /var/log/hosts/proxy*/*/*/*/http/docs.fedoraproject.org-access.log | sed -e 's/^ //' |"
+
+
+# Enter the log file type you want to analyze.
+# Possible values:
+#  W - For a web log file
+#  S - For a streaming log file
+#  M - For a mail log file
+#  F - For a ftp log file
+# Example: W
+# Default: W
+#
+LogType=W
+
+
+# Enter here your log format (Must match your web server config. See setup
+# instructions in documentation to know how to configure your web server to
+# have the required log format).
+# Possible values: 1,2,3,4 or "your_own_personalized_log_format"
+# 1 - Apache or Lotus Notes/Domino native combined log format (NCSA combined/XLF/ELF log format)
+# 2 - IIS or ISA format (IIS W3C log format). See FAQ-COM115 For ISA.
+# 3 - Webstar native log format.
+# 4 - Apache or Squid native common log format (NCSA common/CLF log format)
+#     With LogFormat=4, some features (browsers, os, keywords...) can't work.
+# "your_own_personalized_log_format" = If your log is ftp, mail or other format,
+#     you must use following keys to define the log format string (See FAQ for
+#     ftp, mail or exotic web log format examples):
+#   %host             Client hostname or IP address (or Sender host for mail log)
+#   %host_r           Receiver hostname or IP address (for mail log)
+#   %lognamequot      Authenticated login/user with format: "john"
+#   %logname          Authenticated login/user with format: john
+#   %time1            Date and time with format: [dd/mon/yyyy:hh:mm:ss +0000] or [dd/mon/yyyy:hh:mm:ss]
+#   %time2            Date and time with format: yyyy-mm-dd hh:mm:ss
+#   %time3            Date and time with format: Mon dd hh:mm:ss or Mon dd hh:mm:ss yyyy
+#   %time4            Date and time with unix timestamp format: dddddddddd
+#   %methodurl        Method and URL with format: "GET /index.html HTTP/x.x"
+#   %methodurlnoprot  Method and URL with format: "GET /index.html"
+#   %method           Method with format: GET
+#   %url              URL only with format: /index.html
+#   %query            Query string (used by URLWithQuery option)
+#   %code             Return code status (with format for web log: 999)
+#   %bytesd           Size of document in bytes
+#   %refererquot      Referer page with format: "http://from.com/from.htm"
+#   %referer          Referer page with format: http://from.com/from.htm
+#   %uabracket        User agent with format: [Mozilla/4.0 (compatible, ...)]
+#   %uaquot           User agent with format: "Mozilla/4.0 (compatible, ...)"
+#   %ua               User agent with format: Mozilla/4.0_(compatible...)
+#   %gzipin           mod_gzip compression input bytes: In:XXX
+#   %gzipout          mod_gzip compression output bytes & ratio: Out:YYY:ZZpct.
+#   %gzipratio        mod_gzip compression ratio: ZZpct.
+#   %deflateratio     mod_deflate compression ratio with format: (ZZ)
+#   %email            EMail sender (for mail log)
+#   %email_r          EMail receiver (for mail log)
+#   %virtualname      Web sever virtual hostname. Use this tag when same log
+#                     contains data of several virtual web servers. AWStats
+#                     will discard records not in SiteDomain nor HostAliases
+#   %cluster          If log file is provided from several computers (merged by
+#                     logresolvemerge.pl), use this to define cluster id field.
+#   %extraX           Another field that you plan to use for building a
+#                     personalized report with ExtraSection feature (See later).
+#   If your log format has some fields not included in this list, use:
+#   %other            Means another not used field
+#   %otherquot        Means another not used double quoted field
+#
+# Examples for Apache combined logs (following two examples are equivalent):
+# LogFormat = 1
+# LogFormat = "%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot"
+#
+# Example for IIS:
+# LogFormat = 2
+#
+LogFormat = 1
+
+
+# If your log field's separator is not a space, you can change this parameter.
+# This parameter is not used if LogFormat is a predefined value (1,2,3,4)
+# Backslash can be used as escape character.
+# Example: " "
+# Example: "\t"
+# Example: "\|"
+# Example: ","
+# Default: " "
+#
+LogSeparator=" "
+
+
+# "SiteDomain" must contain the main domain name, or the main intranet web
+# server name, used to reach the web site.
+# If you share the same log file for several virtual web servers, this
+# parameter is used to tell AWStats to filter record that contains records for
+# this virtual host name only (So check that this virtual hostname can be
+# found in your log file and use a personalized log format that include the
+# %virtualname tag).
+# But for multi hosting a better solution is to have one log file for each
+# virtual web server. In this case, this parameter is only used to generate
+# full URL's links when ShowLinksOnUrl option is set to 1.
+# If analyzing mail log, enter here the domain name of mail server.
+# Example: "myintranetserver"
+# Example: "www.domain.com"
+# Example: "ftp.domain.com"
+# Example: "domain.com"
+#
+SiteDomain="docs.fedoraproject.org"
+
+
+# Enter here all other possible domain names, addresses or virtual host
+# aliases someone can use to access your site. Try to keep only the minimum
+# number of possible names/addresses to have the best performances.
+# You can repeat the "SiteDomain" value in this list.
+# This parameter is used to analyze referer field in log file and to help
+# AWStats to know if a referer URL is a local URL of same site or an URL of
+# another site.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Note: You can also use @/mypath/myfile if list of aliases are in a file.
+# Example: "www.myserver.com localhost 127.0.0.1 REGEX[mydomain\.(net|org)$]"
+#
+HostAliases="REGEX[.*\.fedoraproject\.org]"
+
+
+# If you want to have hosts reported by name instead of ip address, AWStats
+# need to make reverse DNS lookups (if not already done in your log file).
+# With DNSLookup to 0, all hosts will be reported by their IP addresses and
+# not by the full hostname of visitors (except if names are already available
+# in log file).
+# If you want/need to set DNSLookup to 1, don't forget that this will reduce
+# dramatically AWStats update process speed. Do not use on large web sites.
+# Note: Reverse DNS lookup is done on IPv4 only (Enable ipv6 plugin for IPv6).
+# Note: Result of DNS Lookup can be used to build the Country report. However
+# it is highly recommanded to enable the plugin 'geoipfree' or 'geoip' to
+# have an accurate Country report with no need of DNS Lookup.
+# Possible values:
+# 0 - No DNS Lookup
+# 1 - DNS Lookup is fully enabled
+# 2 - DNS Lookup is made only from static DNS cache file (if it exists)
+# Default: 2
+# 
+DNSLookup=2
+
+
+# When AWStats updates its statistics, it stores results of its analysis in 
+# files (AWStats database). All those files are written in the directory
+# defined by the "DirData" parameter. Set this value to the directory where
+# you want AWStats to save its database and working files into.
+# Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser"
+# feature (see later), you need "Write" permissions by web server user on this
+# directory (and "Modify" for Windows NTFS file systems).
+# Example: "/var/lib/awstats"
+# Example: "../data"
+# Example: "C:/awstats_data_dir"
+# Default: "."          (means same directory as awstats.pl)
+#
+DirData="/var/lib/awstats"
+
+
+# Relative or absolute web URL of your awstats cgi-bin directory.
+# This parameter is used only when AWStats is run from command line
+# with -output option (to generate links in HTML reported page).
+# Example: "/awstats"
+# Default: "/cgi-bin"   (means awstats.pl is in "/yourwwwroot/cgi-bin")
+#
+DirCgi="/awstats"
+
+
+# Relative or absolute web URL of your awstats icon directory.
+# If you build static reports ("... -output > outputpath/output.html"), enter
+# path of icon directory relative to the output directory 'outputpath'.
+# Example: "/awstatsicons"
+# Example: "../icon"
+# Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon")
+#
+DirIcons="/awstatsicons"
+
+
+# When this parameter is set to 1, AWStats adds a button on report page to
+# allow to "update" statistics from a web browser. Warning, when "update" is
+# made from a browser, AWStats is run as a CGI by the web server user defined
+# in your web server (user "nobody" by default with Apache, "IUSR_XXX" with
+# IIS), so the "DirData" directory and all already existing history files
+# awstatsMMYYYY[.xxx].txt must be writable by this user. Change permissions if
+# necessary to "Read/Write" (and "Modify" for Windows NTFS file systems).
+# Warning: Update process can be long so you might experience "time out"
+# browser errors if you don't launch AWStats frequently enough.
+# When set to 0, update is only made when AWStats is run from the command
+# line interface (or a task scheduler).
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowToUpdateStatsFromBrowser=0
+
+
+# AWStats saves and sorts its database on a month basis (except if using
+# databasebreak option from command line). 
+# However, if you choose the -month=all from command line or
+# value '-Year-' from CGI combo form to have a report for all year, AWStats
+# needs to reload all data for full year (each month), and sort them,
+# requiring a large amount of time, memory and CPU. This might be a problem
+# for web hosting providers that offer AWStats for large sites, on shared
+# servers, to non CPU cautious customers.
+# For this reason, the 'full year' is only enabled on Command Line by default.
+# You can change this by setting this parameter to 0, 1, 2 or 3.
+# Possible values:
+#  0 - Never allowed
+#  1 - Allowed on CLI only, -Year- value in combo is not visible
+#  2 - Allowed on CLI only, -Year- value in combo is visible but not allowed
+#  3 - Possible on CLI and CGI
+# Default: 2
+#
+AllowFullYearView=2
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When the update process runs, AWStats can set a lock file in TEMP or TMP
+# directory. This lock is to avoid to have 2 update processes running at the
+# same time to prevent unknown conflicts problems and avoid DoS attacks when
+# AllowToUpdateStatsFromBrowser is set to 1.
+# Because, when you use lock file, you can experience sometimes problems in
+# lock file not correctly removed (killed process for example requires that
+# you remove the file manualy), this option is not enabled by default (Do
+# not enable this option with no console server access).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+EnableLockForUpdate=1
+
+
+# AWStats can do reverse DNS lookups through a static DNS cache file that was
+# previously created manually. If no path is given in static DNS cache file
+# name, AWStats will search DirData directory. This file is never changed.
+# This option is not used if DNSLookup=0.
+# Note: DNS cache file format is 'minsince1970 ipaddress resolved_hostname'
+# or just 'ipaddress resolved_hostname'
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscache"
+# Default: "dnscache.txt"
+#
+DNSStaticCacheFile="dnscache.txt"
+
+
+# AWStats can do reverse DNS lookups through a DNS cache file that was created
+# by a previous run of AWStats. This file is erased and recreated after each
+# statistics update process. You don't need to create and/or edit it.
+# AWStats will read and save this file in DirData directory.
+# This option is used only if DNSLookup=1.
+# Note: If a DNSStaticCacheFile is available, AWStats will check for DNS
+# lookup in DNSLastUpdateCacheFile after checking into DNSStaticCacheFile.
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscachelastupdate"
+# Default: "dnscachelastupdate.txt"
+#
+DNSLastUpdateCacheFile="dnscachelastupdate.txt"
+
+
+# You can specify specific IP addresses that should NOT be looked up in DNS.
+# This option is used only if DNSLookup=1.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "123.123.123.123 REGEX[^192\.168\.]"
+# Default: ""
+#
+SkipDNSLookupFor=""
+
+
+# The following two parameters allow you to protect a config file from being
+# read by AWStats when called from a browser if web user has not been
+# authenticated. Your AWStats program must be in a web protected "realm" (With
+# Apache, you can use .htaccess files to do so. With other web servers, see
+# your server setup manual).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowAccessFromWebToAuthenticatedUsersOnly=0
+
+
+# This parameter gives the list of all authorized authenticated users to view
+# statistics for this domain/config file. This parameter is used only if
+# AllowAccessFromWebToAuthenticatedUsersOnly is set to 1.
+# Change : Effective immediatly
+# Example: "user1 user2"
+# Example: "__REMOTE_USER__"
+# Default: ""
+#
+AllowAccessFromWebToFollowingAuthenticatedUsers=""
+
+
+# When this parameter is defined to something, the IP address of the user that
+# reads its statistics from a browser (when AWStats is used as a CGI) is
+# checked and must match one of the IP address values or ranges.
+# Change : Effective immediatly
+# Example: "127.0.0.1 123.123.123.1-123.123.123.255"
+# Default: ""
+#
+AllowAccessFromWebToFollowingIPAddresses=""
+
+
+# If the "DirData" directory (see above) does not exist, AWStats return an
+# error. However, you can ask AWStats to create it.
+# This option can be used by some Web Hosting Providers that has defined a 
+# dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and
+# don't want to have to create a new directory each time they add a new user.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+CreateDirDataIfNotExists=0
+
+
+# You can choose in which format the Awstats history database is saved.
+# Note: Using "xml" format make AWStats building database files three times
+# larger than using "text" format.
+# Change : Database format is switched after next update
+# Possible values: text or xml
+# Default: text
+#
+BuildHistoryFormat=text
+
+
+# If you prefer having the report output pages be built as XML compliant pages
+# instead of simple HTML pages, you can set this to 'xhtml' (May not work
+# properly with old browsers).
+# Change : Effective immediatly
+# Possible values: html or xhtml
+# Default: html
+#
+BuildReportFormat=html
+
+
+# AWStats databases can be updated from command line of from a browser (when
+# used as a cgi program). So AWStats database files need write permission
+# for both command line user and default web server user (nobody for Unix,
+# IUSR_xxx for IIS/Windows,...).
+# To avoid permission problems between update process (run by an admin user)
+# and CGI process (ran by a low level user), AWStats can save its database 
+# files with read and write permissions for everyone.
+# By default, AWStats keeps default user permissions on updated files. If you 
+# set AllowToUpdateStatsFromBrowser to 1, you can change this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+SaveDatabaseFilesWithPermissionsForEveryone=0
+
+
+# AWStats can purge log file, after analyzing it. Note that AWStats is able
+# to detect new lines in a log file, to process only them, so you can launch
+# AWStats as often as you want, even with this parameter to 0.
+# With 0, no purge is made, so you must use a scheduled task or a web server
+# that make this purge frequently.
+# With 1, the purge of the log file is made each time AWStats update is run.
+# This parameter doesn't work with IIS (This web server doesn't let its log
+# file to be purged).
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+PurgeLogFile=0
+
+
+# When PurgeLogFile is setup to 1, AWStats will clean your log file after
+# processing it. You can however keep an archive file of all processed log
+# records by setting this parameter (For example if you want to use another
+# log analyzer). The archived log file is saved in "DirData" with name
+# awstats_archive.configname[.suffix].log
+# This parameter is not used if PurgeLogFile=0
+# Change : Effective for new updates only
+# Possible values: 0, 1, or tags (See LogFile parameter) for suffix
+# Example: 1
+# Example: %YYYY%MM%DD
+# Default: 0
+#
+ArchiveLogRecords=0
+
+
+# Each time you run the update process, AWStats overwrites the 'historic file'
+# for the month (awstatsMMYYYY[.*].txt) with the updated one.
+# When write errors occurs (IO, disk full,...), this historic file can be
+# corrupted and must be deleted. Because this file contains information of all
+# past processed log files, you will loose old stats if removed. So you can
+# ask AWStats to save last non corrupted file in a .bak file. This file is
+# stored in "DirData" directory with other 'historic files'.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+KeepBackupOfHistoricFiles=0
+
+
+# Default index page name for your web server.
+# Change : Effective for new updates only
+# Example: "index.php index.html default.html"
+# Default: "index.html"
+#
+DefaultFile="index.html"
+
+
+# Do not include access from clients that match following criteria.
+# If your log file contains IP addresses in host field, you must enter here
+# matching IP addresses criteria.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "SkipHosts" is "OnlyHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Example: "localhost REGEX[^.*\.localdomain$]"
+# Default: ""
+#
+SkipHosts="127.0.0.1"
+
+
+# Do not include access from clients with a user agent that match following
+# criteria. If you want to exclude a robot, you should update the robots.pm
+# file instead of this parameter.
+# The opposite parameter of "SkipUserAgents" is "OnlyUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "konqueror REGEX[ua_test_v\d\.\d]"
+# Default: ""
+#
+SkipUserAgents=""
+
+
+# Use SkipFiles to ignore access to URLs that match one of following entries.
+# You can enter a list of not important URLs (like framed menus, hidden pages,
+# etc...) to exclude them from statistics. You must enter here exact relative
+# URL as found in log file, or a matching REGEX value. Check apply on URL with
+# all its query paramaters.
+# For example, to ignore /badpage.php, just add "/badpage.php". To ignore all
+# pages in a particular directory, add "REGEX[^\/directorytoexclude]".
+# The opposite parameter of "SkipFiles" is "OnlyFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "/badpage.php /page.php?param=x REGEX[^\/excludedirectory]"
+# Default: ""
+#
+SkipFiles=""
+
+
+# Use SkipReferrersBlackList if you want to exclude records coming from a SPAM
+# referrer. Parameter must receive a local file name containing rules applied
+# on referrer field. If parameter is empty, no filter is applied.
+# An example of such a file is available in lib/blacklist.txt
+# You can download updated version at http://www.jayallen.org/comment_spam/
+# Change : Effective for new updates only
+# Example: "/mylibpath/blacklist.txt"
+# Default: ""
+#
+# WARNING!! Using this feature make AWStats running very slower (5 times slower
+# with black list file provided with AWStats !
+#
+SkipReferrersBlackList=""
+
+
+# Include in stats, only accesses from hosts that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular hosts, you can add those host names in
+# this parameter.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "OnlyHosts" is "SkipHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Default: ""
+#
+OnlyHosts=""
+
+
+# Include in stats, only accesses from user agent that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular browsers, you can add their user agents
+# string in this parameter.
+# The opposite parameter of "OnlyUserAgents" is "SkipUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "msie"
+# Default: ""
+#
+OnlyUserAgents=""
+
+
+# Include in stats, only accesses to URLs that match one of following entries.
+# For example, if you want AWStats to filter access to keep only stats that
+# match a particular string, like a particular directory, you can add this
+# directory name in this parameter.
+# The opposite parameter of "OnlyFiles" is "SkipFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "REGEX[marketing_directory] REGEX[office\/.*\.(csv|sxw)$]"
+# Default: ""
+#
+OnlyFiles=""
+
+
+# Add here a list of kind of url (file extension) that must be counted as
+# "Hit only" and not as a "Hit" and "Page/Download". You can set here all
+# image extensions as they are hit downloaded that must be counted but they
+# are not viewed pages. URLs with such extensions are not included in the TOP
+# Pages/URL report.
+# Note: If you want to exclude particular URLs from stats (No Pages and no
+# Hits reported), you must use SkipFiles parameter.
+# Change : Effective for new updates only
+# Example: "css js class gif jpg jpeg png bmp ico zip arj gz z wav mp3 wma mpg"
+# Example: ""
+# Default: "css js class gif jpg jpeg png bmp ico"
+#
+NotPageList="css js class gif jpg jpeg png bmp ico swf"
+
+
+# By default, AWStats considers that records found in web log file are
+# successful hits if HTTP code returned by server is a valid HTTP code (200
+# and 304). Any other code are reported in HTTP status chart.
+# Note that HTTP 'control codes', like redirection (302, 305) are not added by
+# default in this list as they are not pages seen by a visitor but are
+# protocol exchange codes to tell the browser to ask another page. Because
+# this other page will be counted and seen with a 200 or 304 code, if you 
+# add such codes, you will have 2 pages viewed reported for only one in facts.
+# Change : Effective for new updates only
+# Example: "200 304 302 305"
+# Default: "200 304"
+#
+ValidHTTPCodes="200 304"
+
+
+# By default, AWStats considers that records found in mail log file are
+# successful mail transfers if field that represent return code in analyzed
+# log file match values defined by this parameter.
+# Change : Effective for new updates only
+# Example: "1 250 200"
+# Default: "1 250"
+#
+ValidSMTPCodes="1 250"
+
+
+# Some web servers on some Operating systems (IIS-Windows) consider that a
+# login with same value but different case are the same login. To tell AWStats
+# to also consider them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+AuthenticatedUsersNotCaseSensitive=0
+
+
+# Some web servers on some Operating systems (IIS-Windows) considers that two
+# URLs with same value but different case are the same URL. To tell AWStats to
+# also considers them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+URLNotCaseSensitive=0
+
+
+# Keep or remove the anchor string you can find in some URLs.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+URLWithAnchor=0
+
+
+# In URL links, "?" char is used to add parameter's list in URLs. Syntax is:
+# /mypage.html?param1=value1&param2=value2
+# However, some servers/sites use also other chars to isolate dynamic part of
+# their URLs. You can complete this list with all such characters.
+# Change : Effective for new updates only
+# Example: "?;,"
+# Default: "?;"
+#
+URLQuerySeparators="?;"
+
+
+# Keep or remove the query string to the URL in the statistics for individual
+# pages. This is primarily used to differentiate between the URLs of dynamic
+# pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as two
+# different pages.
+# Warning, when set to 1, memory required to run AWStats is dramatically
+# increased if you have a lot of changing URLs (for example URLs with a random
+# id inside). Such web sites should not set this option to 1 or use seriously
+# the next parameter URLWithQueryWithOnlyFollowingParameters (or eventually 
+# URLWithQueryWithoutFollowingParameters).
+# Change : Effective for new updates only
+# Possible values:
+# 0 - URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used     (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLWithQuery=0
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to keep only parameters
+# you need (if you know them) before counting, manipulating and storing URL.
+# Enter here list of wanted parameters. For example, with "param", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithoutFollowingParameters.
+# Change : Effective for new updates only
+# Example: "param"
+# Default: ""
+# 
+URLWithQueryWithOnlyFollowingParameters=""
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to remove such parameters
+# from the URL before counting, manipulating and storing URL. Enter here list
+# of all non wanted parameters. For example if you enter "id", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithOnlyFollowingParameters.
+# Change : Effective for new updates only
+# Example: "PHPSESSID jsessionid"
+# Default: ""
+# 
+URLWithQueryWithoutFollowingParameters=""
+
+
+# Keep or remove the query string to the referrer URL in the statistics for
+# external referrer pages. This is used to differentiate between the URLs of
+# dynamic referrer pages. If set to 1, mypage.html?id=x and mypage.html?id=y
+# are counted as two different referrer pages.
+# Change : Effective for new updates only
+# Possible values:
+# 0 - Referrer URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used      (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLReferrerWithQuery=0
+
+
+# AWStats can detect setup problems or show you important informations to have
+# a better use. Keep this to 1, except if AWStats says you can change it.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 1
+#
+WarningMessages=1
+
+
+# When an error occurs, AWStats outputs a message related to errors. If you
+# want (in most cases for security reasons) to have no error messages, you
+# can set this parameter to your personalized generic message.
+# Change : Effective immediatly
+# Example: "An error occurred. Contact your Administrator"
+# Default: ""
+#
+ErrorMessages=""
+
+
+# AWStat can be run with debug=x parameter to output various informations
+# to help in debugging or solving troubles. If you want to allow this (not
+# enabled by default for security reasons), set this parameter to 0.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+DebugMessages=0
+
+
+# To help you to detect if your log format is good, AWStats reports an error
+# if all the first NbOfLinesForCorruptedLog lines have a format that does not
+# match the LogFormat parameter.
+# However, some worm virus attack on your web server can result in a very high
+# number of corrupted lines in your log. So if you experience awstats stop
+# because of bad virus records at the beginning of your log file, you can
+# increase this parameter (very rare).
+# Change : Effective for new updates only
+# Default: 50
+#
+NbOfLinesForCorruptedLog=50
+
+
+# For some particular integration needs, you may want to have CGI links to
+# point to another script than awstats.pl.
+# Use the name of this script in WrapperScript parameter.
+# Change : Effective immediatly
+# Example: "awstatslauncher.pl"
+# Default: ""
+#
+WrapperScript=""
+
+
+# DecodeUA must be set to 1 if you use Roxen web server. This server converts
+# all spaces in user agent field into %20. This make the AWStats robots, OS
+# and browsers detection fail in some cases. Just change it to 1 if and only
+# if your web server is Roxen.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+DecodeUA=0
+
+
+# MiscTrackerUrl can be used to make AWStats able to detect some miscellaneous
+# things, that can not be tracked on other way, like:
+# - Javascript disabled
+# - Java enabled
+# - Screen size
+# - Color depth
+# - Macromedia Director plugin
+# - Macromedia Shockwave plugin
+# - Realplayer G2 plugin
+# - QuickTime plugin
+# - Mediaplayer plugin
+# - Acrobat PDF plugin
+# To enable all these features, you must copy the awstats_misc_tracker.js file
+# into a /js/ directory stored in your web document root and add the following
+# HTML code at the end of your index page (but before </BODY>) :
+#
+# <script language=javascript src="/js/awstats_misc_tracker.js"></script>
+# <noscript><img src="/js/awstats_misc_tracker.js?nojs=y" height=0 width=0 border=0 style="display: none"></noscript>
+#
+# If code is not added in index page, all those detection capabilities will be
+# disabled. You must also check that ShowScreenSizeStats and ShowMiscStats
+# parameters are set to 1 to make results appear in AWStats report page.
+# If you want to use another directory than /js/, you must also change the
+# awstatsmisctrackerurl variable into the awstats_misc_tracker.js file.
+# Change : Effective for new updates only.
+# Possible value: URL of javascript tracker file added in your HTML code.
+# Default: "/js/awstats_misc_tracker.js"
+#
+MiscTrackerUrl="/js/awstats_misc_tracker.js"
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# The following values allow you to define accuracy of AWStats entities
+# (robots, browsers, os, referers, file types) detection.
+# It might be a good idea for large web sites or ISP that provides AWStats to
+# high number of customers, to set this parameter to 1 (or 0), instead of 2.
+# Possible values:
+#    0      = No detection,
+#    1      = Medium/Standard detection
+#    2      = Full detection
+# Change : Effective for new updates only
+# Note   : LevelForBrowsersDetection can also accept value "allphones". This
+#          enable detailed detection of phone/pda browsers.
+# Default: 2 (0 for LevelForWormsDetection)
+#
+LevelForBrowsersDetection=2         # 0 disables Browsers detection.
+                                    # 2 reduces AWStats speed by 2%
+                                    # allphones reduces AWStats speed by 5%
+LevelForOSDetection=2               # 0 disables OS detection.
+                                    # 2 reduces AWStats speed by 3%
+LevelForRefererAnalyze=2            # 0 disables Origin detection.
+                                    # 2 reduces AWStats speed by 14%
+LevelForRobotsDetection=2           # 0 disables Robots detection.
+                                    # 2 reduces AWStats speed by 2.5%
+LevelForSearchEnginesDetection=2    # 0 disables Search engines detection.
+                                    # 2 reduces AWStats speed by 9%
+LevelForKeywordsDetection=2         # 0 disables Keyphrases/Keywords detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForFileTypesDetection=2        # 0 disables File types detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForWormsDetection=0            # 0 disables Worms detection.
+                                    # 2 reduces AWStats speed by 15%
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When you use AWStats as a CGI, you can have the reports shown in HTML frames.
+# Frames are only available for report viewed dynamically. When you build
+# pages from command line, this option is not used and no frames are built.
+# Possible values: 0 or 1
+# Default: 1
+#
+UseFramesWhenCGI=1
+
+
+# This parameter asks your browser to open detailed reports into a different
+# window than the main page.
+# Possible values:
+# 0 - Open all in same browser window
+# 1 - Open detailed reports in another window except if using frames
+# 2 - Open always in a different window even if reports are framed
+# Default: 1
+#
+DetailedReportsOnNewWindows=1
+
+
+# You can add, in the HTML report page, a cache lifetime (in seconds) that
+# will be returned to the browser in HTTP header answer by server.
+# This parameter is not used when reports are built with -staticlinks option.
+# Example: 3600
+# Default: 0
+#
+Expires=3600
+
+
+# To avoid too large web pages, you can ask AWStats to limit number of rows of
+# all reported charts to this number when no other limits apply.
+# Default: 1000
+#
+MaxRowsInHTMLOutput=1000
+
+
+# Set your primary language (ISO-639-1 language codes).
+# Possible values:
+#  Albanian=al, Bosnian=ba, Bulgarian=bg, Catalan=ca,
+#  Chinese (Taiwan)=tw, Chinese (Simpliefied)=cn, Croatian=hr, Czech=cz,
+#  Danish=dk, Dutch=nl, English=en, Estonian=et, Euskara=eu, Finnish=fi,
+#  French=fr, Galician=gl, German=de, Greek=gr, Hebrew=he, Hungarian=hu,
+#  Icelandic=is, Indonesian=id, Italian=it, Japanese=jp, Korean=ko,
+#  Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl,
+#  Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru,
+#  Serbian=sr, Slovak=sk, Slovenian=si, Spanish=es, Swedish=se, Turkish=tr,
+#  Ukrainian=ua, Welsh=cy.
+#  First available language accepted by browser=auto
+# Default: "auto"
+#
+Lang="auto"
+
+
+# Set the location of language files.
+# Example: "/usr/share/awstats/lang"
+# Default: "./lang" (means lang directory is in same location than awstats.pl)
+#
+DirLang="./lang"
+
+
+# Show menu header with reports' links
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowMenu=1					
+
+
+# You choose here which reports you want to see in the main page and what you
+# want to see in those reports.
+# Possible values:
+#  0  - Report is not shown at all
+#  1  - Report is shown in main page with an entry in menu and default columns
+# XYZ - Report shows column informations defined by code X,Y,Z...
+#       X,Y,Z... are code letters among the following:
+#        U = Unique visitors
+#        V = Visits
+#        P = Number of pages
+#        H = Number of hits (or mails)
+#        B = Bandwith (or total mail size for mail logs)
+#        L = Last access date
+#        E = Entry pages
+#        X = Exit pages
+#        C = Web compression (mod_gzip,mod_deflate)
+#        M = Average mail size (mail logs)
+#
+
+# Show monthly summary
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowSummary=UVPHB
+
+# Show monthly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowMonthStats=UVPHB
+
+# Show days of month chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: VPHB, Possible column codes: VPHB
+ShowDaysOfMonthStats=VPHB
+
+# Show days of week chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDaysOfWeekStats=PHB
+
+# Show hourly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowHoursStats=PHB
+
+# Show domains/country chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDomainsStats=PHB
+
+# Show hosts chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHBL, Possible column codes: PHBL
+ShowHostsStats=PHBL
+
+# Show authenticated users chart
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHBL
+ShowAuthenticatedUsers=0
+
+# Show robots chart
+# Context: Web, Streaming
+# Default: HBL, Possible column codes: HBL
+ShowRobotsStats=HBL
+
+# Show worms chart
+# Context: Web, Streaming
+# Default: 0 (If set to other than 0, see also LevelForWormsDetection), Possible column codes: HBL
+ShowWormsStats=0
+
+# Show email senders chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailSenders=0
+
+# Show email receivers chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailReceivers=0
+
+# Show session chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowSessionsStats=1
+
+# Show pages-url chart.
+# Context: Web, Streaming, Ftp
+# Default: PBEX, Possible column codes: PBEX
+ShowPagesStats=PBEX
+
+# Show file types chart.
+# Context: Web, Streaming, Ftp
+# Default: HB, Possible column codes: HBC
+ShowFileTypesStats=HB
+
+# Show file size chart (Not yet available)
+# Context: Web, Streaming, Mail, Ftp
+# Default: 1, Possible column codes: None
+ShowFileSizesStats=0		
+
+# Show operating systems chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowOSStats=1
+
+# Show browsers chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowBrowsersStats=1
+
+# Show screen size chart
+# Context: Web, Streaming
+# Default: 0 (If set to 1, see also MiscTrackerUrl), Possible column codes: None
+ShowScreenSizeStats=0
+
+# Show origin chart
+# Context: Web, Streaming
+# Default: PH, Possible column codes: PH
+ShowOriginStats=PH
+
+# Show keyphrases chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeyphrasesStats=1
+
+# Show keywords chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeywordsStats=1
+
+# Show misc chart
+# Context: Web, Streaming
+# Default: a (See also MiscTrackerUrl parameter), Possible column codes: anjdfrqwp
+ShowMiscStats=a
+
+# Show http errors chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowHTTPErrorsStats=1
+
+# Show smtp errors chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: None
+ShowSMTPErrorsStats=0
+
+# Show the cluster report (Your LogFormat must contains the %cluster tag)
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHB
+ShowClusterStats=0
+
+
+# Some graphical reports are followed by the data array of values.
+# If you don't want this array (to reduce the report size for example), you
+# can set thoose options to 0.
+# Possible values: 0 or 1
+# Default: 1
+#
+# Data array values for the ShowMonthStats report
+AddDataArrayMonthStats=1
+# Data array values for the ShowDaysOfMonthStats report
+AddDataArrayShowDaysOfMonthStats=1
+# Data array values for the ShowDaysOfWeekStats report
+AddDataArrayShowDaysOfWeekStats=1
+# Data array values for the ShowHoursStats report
+AddDataArrayShowHoursStats=1
+
+
+# In the Origin chart, you have stats on where your hits came from. You can
+# include hits on pages that come from pages of same sites in this chart.
+# Possible values: 0 or 1
+# Default: 0
+#
+IncludeInternalLinksInOriginSection=0
+
+
+# The following parameters can be used to choose the maximum number of lines
+# shown for the particular following reports.
+#
+# Stats by countries/domains
+MaxNbOfDomain = 10
+MinHitDomain  = 1
+# Stats by hosts
+MaxNbOfHostsShown = 10
+MinHitHost    = 1
+# Stats by authenticated users
+MaxNbOfLoginShown = 10
+MinHitLogin   = 1
+# Stats by robots
+MaxNbOfRobotShown = 10
+MinHitRobot   = 1
+# Stats by pages
+MaxNbOfPageShown = 10
+MinHitFile    = 1
+# Stats by OS
+MaxNbOfOsShown = 10
+MinHitOs      = 1
+# Stats by browsers
+MaxNbOfBrowsersShown = 10
+MinHitBrowser = 1
+# Stats by screen size
+MaxNbOfScreenSizesShown = 5
+MinHitScreenSize = 1
+# Stats by window size (following 2 parameters are not yet used)
+MaxNbOfWindowSizesShown = 5
+MinHitWindowSize = 1
+# Stats by referers
+MaxNbOfRefererShown = 10
+MinHitRefer   = 1
+# Stats for keyphrases
+MaxNbOfKeyphrasesShown = 10
+MinHitKeyphrase = 1
+# Stats for keywords
+MaxNbOfKeywordsShown = 10
+MinHitKeyword = 1
+# Stats for sender or receiver emails
+MaxNbOfEMailsShown = 20
+MinHitEMail   = 1
+
+
+# Choose if you want the week report to start on sunday or monday
+# Possible values:
+# 0 - Week starts on sunday
+# 1 - Week starts on monday
+# Default: 1
+#
+FirstDayOfWeek=1
+
+
+# List of visible flags that link to other language translations.
+# See Lang parameter for list of allowed flag/language codes.
+# If you don't want any flag link, set ShowFlagLinks to "".
+# This parameter is used only if ShowMenu parameter is set to 1.
+# Possible values: "" or "language_codes_separated_by_space"
+# Example: "en es fr nl de"
+# Default: ""
+#
+ShowFlagLinks=""
+
+
+# Each URL, shown in stats report views, are links you can click.
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowLinksOnUrl=1
+
+
+# When AWStats builds HTML links in its report pages, it starts those links
+# with "http://". However some links might be HTTPS links, so you can enter
+# here the root of all your HTTPS links. If all your site is a SSL web site,
+# just enter "/".
+# This parameter is not used if ShowLinksOnUrl is 0.
+# Example: "/shopping"
+# Example: "/"
+# Default: ""
+#
+UseHTTPSLinkForUrl=""
+
+
+# Maximum length of URL part shown on stats page (number of characters).
+# This affects only URL visible text, links still work.
+# Default: 64
+#
+MaxLengthOfShownURL=64
+
+
+# You can enter HTML code that will be added at the top of AWStats reports.
+# Default: ""
+#
+HTMLHeadSection=""
+
+
+# You can enter HTML code that will be added at the end of AWStats reports.
+# Great to add advert ban.
+# Default: ""
+#
+HTMLEndSection=""
+
+
+# You can set Logo and LogoLink to use your own logo.
+# Logo must be the name of image file (must be in $DirIcons/other directory).
+# LogoLink is the expected URL when clicking on Logo.
+# Default: "awstats_logo6.png"
+#
+Logo="awstats_logo6.png"
+LogoLink="http://awstats.sourceforge.net"
+
+
+# Value of maximum bar width/height for horizontal/vertical HTML graphics bars.
+# Default: 260/90
+#
+BarWidth   = 260
+BarHeight  = 90
+
+
+# You can ask AWStats to use a particular CSS (Cascading Style Sheet) to
+# change its look. To create a style sheet, you can use samples provided with
+# AWStats in wwwroot/css directory.
+# Example: "/awstatscss/awstats_bw.css"
+# Example: "/css/awstats_bw.css"
+# Default: ""
+#
+StyleSheet=""
+
+
+# Those color parameters can be used (if StyleSheet parameter is not used)
+# to change AWStats look.
+# Example: color_name="RRGGBB"	# RRGGBB is Red Green Blue components in Hex
+#
+color_Background="FFFFFF"		# Background color for main page (Default = "FFFFFF")
+color_TableBGTitle="CCCCDD"		# Background color for table title (Default = "CCCCDD")
+color_TableTitle="000000"		# Table title font color (Default = "000000")
+color_TableBG="CCCCDD"			# Background color for table (Default = "CCCCDD")
+color_TableRowTitle="FFFFFF"	# Table row title font color (Default = "FFFFFF")
+color_TableBGRowTitle="ECECEC"	# Background color for row title (Default = "ECECEC")
+color_TableBorder="ECECEC"		# Table border color (Default = "ECECEC")
+color_text="000000"				# Color of text (Default = "000000")
+color_textpercent="606060"		# Color of text for percent values (Default = "606060")
+color_titletext="000000"		# Color of text title within colored Title Rows (Default = "000000")
+color_weekend="EAEAEA"			# Color for week-end days (Default = "EAEAEA")
+color_link="0011BB"				# Color of HTML links (Default = "0011BB")
+color_hover="605040"			# Color of HTML on-mouseover links (Default = "605040") 
+color_u="FFAA66"				# Background color for number of unique visitors (Default = "FFAA66")
+color_v="F4F090"				# Background color for number of visites (Default = "F4F090")
+color_p="4477DD"				# Background color for number of pages (Default = "4477DD")
+color_h="66DDEE"				# Background color for number of hits (Default = "66DDEE")
+color_k="2EA495"				# Background color for number of bytes (Default = "2EA495")
+color_s="8888DD"				# Background color for number of search (Default = "8888DD")
+color_e="CEC2E8"				# Background color for number of entry pages (Default = "CEC2E8")
+color_x="C1B2E2"				# Background color for number of exit pages (Default = "C1B2E2")
+
+
+
+#-----------------------------------------------------------------------------
+# PLUGINS
+#-----------------------------------------------------------------------------
+
+# Add here all plugin files you want to load.
+# Plugin files must be .pm files stored in 'plugins' directory.
+# Uncomment LoadPlugin lines to enable a plugin after checking that perl
+# modules required by the plugin are installed.
+
+# Plugin: Tooltips
+# Perl modules required: None
+# Add some tooltips help on HTML report pages.
+# Note that enabling this kind of help will increased HTML report pages size,
+# so server load and bandwidth.
+#
+LoadPlugin="tooltips"
+
+# Plugin: DecodeUTFKeys
+# Perl modules required: Encode and URI::Escape
+# Allow AWStats to show correctly (in language charset) keywords/keyphrases
+# strings even if they were UTF8 coded by the referer search engine.
+#
+#LoadPlugin="decodeutfkeys"
+
+# Plugin: IPv6
+# Perl modules required: Net::IP and Net::DNS
+# This plugin gives AWStats capability to make reverse DNS lookup on IPv6
+# addresses.
+# Note: If you are interested in having country report, you should use the
+# geoipfree or geoip plugin instead of enabled reverse DNS lookup.
+#
+#LoadPlugin="ipv6"
+
+# Plugin: HashFiles
+# Perl modules required: Storable
+# AWStats DNS cache files are read/saved as native hash files. This increases
+# DNS cache files loading speed, above all for very large web sites.
+#
+LoadPlugin="hashfiles"
+
+# Plugin: GeoIP
+# Perl modules required: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IP module 
+# from Maxmind, database more up to date) or the GeoIPfree plugin (need
+# Perl Geo::IPfree module, database less up to date).
+# This plugin reduces AWStats speed of 8% !
+#
+LoadPlugin="geoip GEOIP_STANDARD /usr/share/GeoIP/GeoIP.dat"
+
+# Plugin: GeoIPfree
+# Perl modules required: Geo::IPfree version 0.2+ (from Graciliano M.P.)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IPfree
+# module, database less up to date) or the GeoIP plugin (need Perl Geo::IP
+# module from Maxmind, database more up to date).
+# Note: Activestate provide a corrupted version of Geo::IPfree 0.2 Perl
+# module, so install it from elsewhere (from www.cpan.org for example).
+# This plugin reduces AWStats speed of 10% !
+#
+#LoadPlugin="geoipfree"
+
+# Plugin: GeoIP_Region_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by regions. Only regions for US and 
+# Canada can be detected.
+# Note: This plugin need Maxmind GeoIP Perl module AND the region database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Region database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_region_maxmind GEOIP_STANDARD /pathto/GeoIPRegion.dat"
+
+# Plugin: GeoIP_City_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by cities (with country and regions
+# informations for major countries).
+# Note: This plugin need Maxmind GeoIP Perl module AND the city database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the City database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /pathto/GeoIPCity.dat"
+
+# Plugin: GeoIP_ISP_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by ISP.
+# Note: This plugin need Maxmind GeoIP Perl module AND the ISP database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the ISP database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_isp_maxmind GEOIP_STANDARD /pathto/GeoIPISP.dat"
+
+# Plugin: GeoIP_Org_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by Organization name
+# Note: This plugin need Maxmind GeoIP Perl module AND the Org database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Org database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_org_maxmind GEOIP_STANDARD /pathto/GeoIPOrg.dat"
+
+# Plugin: UserInfo
+# Perl modules required: None
+# Add a text (Firtname, Lastname, Office Department, ...) in authenticated user
+# reports for each login value.
+# A text file called userinfo.myconfig.txt, with two fields (first is login,
+# second is text to show, separated by a tab char) must be created in DirData
+# directory.
+#
+#LoadPlugin="userinfo"
+
+# Plugin: HostInfo
+# Perl modules required: Net::XWhois
+# Add a column into host chart with a link to open a popup window that shows
+# info on host (like whois records).
+#
+#LoadPlugin="hostinfo"
+
+# Plugin: ClusterInfo
+# Perl modules required: None
+# Add a text (for example a full hostname) in cluster reports for each cluster
+# number.
+# A text file called clusterinfo.myconfig.txt, with two fields (first is
+# cluster number, second is text to show) separated by a tab char. must be
+# created into DirData directory.
+# Note this plugin is useless if ShowClusterStats is set to 0 or if you don't
+# use a personalized log format that contains %cluster tag.
+#
+#LoadPlugin="clusterinfo"
+
+# Plugin: UrlAliases
+# Perl modules required: None
+# Add a text (Page title, description...) in URL reports before URL value.
+# A text file called urlalias.myconfig.txt, with two fields (first is URL,
+# second is text to show, separated by a tab char) must be created into
+# DirData directory.
+#
+#LoadPlugin="urlalias"
+
+# Plugin: TimeHiRes
+# Perl modules required: Time::HiRes (if Perl < 5.8)
+# Time reported by -showsteps option is in millisecond. For debug purpose.
+#
+#LoadPlugin="timehires"		
+
+# Plugin: TimeZone
+# Perl modules required: Time::Local
+# Allow AWStats to correct a bad timezone for user of some IIS that use
+# GMT date in its log instead of local server time.
+# This module is useless for Apache and most IIS version.
+# This plugin reduces AWStats speed of 40% !!!!!!!
+#
+#LoadPlugin="timezone +2"
+
+# Plugin: Rawlog
+# Perl modules required: None
+# This plugin adds a form in AWStats main page to allow users to see raw
+# content of current log files. A filter is also available.
+#
+#LoadPlugin="rawlog"
+
+# Plugin: GraphApplet
+# Perl modules required: None
+# Supported charts are built by a 3D graphic applet.
+#
+#LoadPlugin="graphapplet /awstatsclasses"				# EXPERIMENTAL FEATURE
+
+
+
+#-----------------------------------------------------------------------------
+# EXTRA SECTIONS
+#-----------------------------------------------------------------------------
+
+# You can define your own charts, you choose here what are rows and columns
+# keys. This feature is particularly useful for marketing purpose, tracking
+# products orders for example.
+# For this, edit all parameters of Extra section. Each set of parameter is a
+# different chart. For several charts, duplicate section changing the number.
+# Note: Each Extra section reduces AWStats speed by 8%.
+#
+# WARNING: A wrong setup of Extra section might result in too large arrays
+# that will consume all your memory, making AWStats unusable after several
+# updates, so be sure to setup it correctly.
+# In most cases, you don't need this feature.
+#
+# ExtraSectionNameX is title of your personalized chart.
+# ExtraSectionCodeFilterX is list of codes the record code field must match.
+#   Put an empty string for no test on code.
+# ExtraSectionConditionX are conditions you can use to count or not the hit,
+#   Use one of the field condition
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,extraX)
+#   and a regex to match, after a coma. Use "||" for "OR".
+# ExtraSectionFirstColumnTitleX is the first column title of the chart.
+# ExtraSectionFirstColumnValuesX is a string to tell AWStats which field to
+#   extract value from
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,VHOST,extraX)
+#   and how to extract the value (using regex syntax). Each different value
+#   found will appear in first column of report on a different row. Be sure
+#   that list of different possible values will not grow indefinitely.
+# ExtraSectionFirstColumnFormatX is the string used to write value.
+# ExtraSectionStatTypesX are things you want to count. You can use standard
+#   code letters (P for pages,H for hits,B for bandwidth,L for last access).
+# ExtraSectionAddAverageRowX add a row at bottom of chart with average values.
+# ExtraSectionAddSumRowX add a row at bottom of chart with sum values.
+# MaxNbOfExtraX is maximum number of rows shown in chart.
+# MinHitExtraX is minimum number of hits required to be shown in chart.
+#
+
+# Example to report the 20 products the most ordered by "order.cgi" script
+#ExtraSectionName1="Product orders"
+#ExtraSectionCodeFilter1="200 304"
+#ExtraSectionCondition1="URL,\/cgi\-bin\/order\.cgi||URL,\/cgi\-bin\/order2\.cgi"
+#ExtraSectionFirstColumnTitle1="Product ID"
+#ExtraSectionFirstColumnValues1="QUERY_STRING,productid=([^&]+)"
+#ExtraSectionFirstColumnFormat1="%s"
+#ExtraSectionStatTypes1=PL
+#ExtraSectionAddAverageRow1=0
+#ExtraSectionAddSumRow1=1
+#MaxNbOfExtra1=20
+#MinHitExtra1=1
+
+
+# There is also a global parameter ExtraTrackedRowsLimit that limits the
+# number of possible rows an ExtraSection can report. This parameter is
+# here to protect too much memory use when you make a bad setup in your
+# ExtraSection. It applies to all ExtraSection independently meaning that
+# none ExtraSection can report more rows than value defined by ExtraTrackedRowsLimit.
+# If you know an ExtraSection will report more rows than its value, you should
+# increase this parameter or AWStats will stop with an error.
+# Example: 2000
+# Default: 500
+#
+ExtraTrackedRowsLimit=500
+
+
+#-----------------------------------------------------------------------------
+# INCLUDES
+#-----------------------------------------------------------------------------
+
+# You can include other config files using the directive with the name of the
+# config file.
+# This is particularly useful for users who have a lot of virtual servers, so
+# a lot of config files and want to maintain common values in only one file.
+# Note that when a variable is defined both in a config file and in an
+# included file, AWStats will use the last value read for parameters that
+# contains one value and AWStats will concat all values from both files for
+# parameters that are lists of values.
+#
+
+#Include ""
+
diff --git a/modules/awstats/files/awstats.fedoraproject.org.conf b/modules/awstats/files/awstats.fedoraproject.org.conf
index 7f01811..71cb144 100644
--- a/modules/awstats/files/awstats.fedoraproject.org.conf
+++ b/modules/awstats/files/awstats.fedoraproject.org.conf
@@ -48,7 +48,6 @@
 # If there are several log files from load balancing servers :
 # Example: "/pathtotools/logresolvemerge.pl *.log |"
 #
-#LogFile="/usr/share/awstats/tools/logresolvemerge.pl /var/log/hosts/proxy*/*/*/*/http/fedoraproject.org-access.log |"
 LogFile="/usr/share/awstats/tools/logresolvemerge.pl /var/log/hosts/proxy*/*/*/*/http/fedoraproject.org-access.log | sed -e 's/^ //' |"

diff --git a/modules/awstats/files/awstats.mirrors.fedoraproject.org.conf b/modules/awstats/files/awstats.mirrors.fedoraproject.org.conf
new file mode 100644
index 0000000..2e12a80
--- /dev/null
+++ b/modules/awstats/files/awstats.mirrors.fedoraproject.org.conf
@@ -0,0 +1,1499 @@
+# AWSTATS CONFIGURE FILE 6.6
+#-----------------------------------------------------------------------------
+# Copy this file into awstats.www.mydomain.conf and edit this new config file
+# to setup AWStats (See documentation in docs/ directory).
+# The config file must be in /etc/awstats, /usr/local/etc/awstats or /etc (for
+# Unix/Linux) or same directory than awstats.pl (Windows, Mac, Unix/Linux...)
+# To include an environment variable in any parameter (AWStats will replace
+# it with its value when reading it), follow the example:
+# Parameter="__ENVNAME__"
+# Note that environment variable AWSTATS_CURRENT_CONFIG is always defined with
+# the config value in an AWStats running session and can be used like others.
+#-----------------------------------------------------------------------------
+# $Revision: 1.327 $ - $Author: eldy $ - $Date: 2006/04/21 22:28:49 $
+
+
+
+#-----------------------------------------------------------------------------
+# MAIN SETUP SECTION (Required to make AWStats work)
+#-----------------------------------------------------------------------------
+
+# "LogFile" contains the web, ftp or mail server log file to analyze.
+# Possible values: A full path, or a relative path from awstats.pl directory.
+# Example: "/var/log/apache/access.log"
+# Example: "../logs/mycombinedlog.log"
+# You can also use tags in this filename if you need a dynamic file name
+# depending on date or time (Replacement is made by AWStats at the beginning
+# of its execution). This is available tags :
+#   %YYYY-n  is replaced with 4 digits year we were n hours ago
+#   %YY-n    is replaced with 2 digits year we were n hours ago
+#   %MM-n    is replaced with 2 digits month we were n hours ago
+#   %MO-n    is replaced with 3 letters month we were n hours ago
+#   %DD-n    is replaced with day we were n hours ago
+#   %HH-n    is replaced with hour we were n hours ago
+#   %NS-n    is replaced with number of seconds at 00:00 since 1970
+#   %WM-n    is replaced with the week number in month (1-5)
+#   %Wm-n    is replaced with the week number in month (0-4)
+#   %WY-n    is replaced with the week number in year (01-52)
+#   %Wy-n    is replaced with the week number in year (00-51)
+#   %DW-n    is replaced with the day number in week (1-7, 1=sunday)
+#                              use n=24 if you need (1-7, 1=monday)
+#   %Dw-n    is replaced with the day number in week (0-6, 0=sunday)
+#                              use n=24 if you need (0-6, 0=monday)
+#   Use 0 for n if you need current year, month, day, hour...
+# Example: "/var/log/access_log.%YYYY-0%MM-0%DD-0.log"
+# Example: "C:/WINNT/system32/LogFiles/W3SVC1/ex%YY-24%MM-24%DD-24.log"
+# You can also use a pipe if log file come from a pipe :
+# Example: "gzip -d </var/log/apache/access.log.gz |"
+# If there are several log files from load balancing servers :
+# Example: "/pathtotools/logresolvemerge.pl *.log |"
+#
+LogFile="/usr/share/awstats/tools/logresolvemerge.pl /var/log/hosts/proxy*/*/*/*/http/mirrors.fedoraproject.org-access.log | sed -e 's/^ //' |"
+
+
+# Enter the log file type you want to analyze.
+# Possible values:
+#  W - For a web log file
+#  S - For a streaming log file
+#  M - For a mail log file
+#  F - For a ftp log file
+# Example: W
+# Default: W
+#
+LogType=W
+
+
+# Enter here your log format (Must match your web server config. See setup
+# instructions in documentation to know how to configure your web server to
+# have the required log format).
+# Possible values: 1,2,3,4 or "your_own_personalized_log_format"
+# 1 - Apache or Lotus Notes/Domino native combined log format (NCSA combined/XLF/ELF log format)
+# 2 - IIS or ISA format (IIS W3C log format). See FAQ-COM115 For ISA.
+# 3 - Webstar native log format.
+# 4 - Apache or Squid native common log format (NCSA common/CLF log format)
+#     With LogFormat=4, some features (browsers, os, keywords...) can't work.
+# "your_own_personalized_log_format" = If your log is ftp, mail or other format,
+#     you must use following keys to define the log format string (See FAQ for
+#     ftp, mail or exotic web log format examples):
+#   %host             Client hostname or IP address (or Sender host for mail log)
+#   %host_r           Receiver hostname or IP address (for mail log)
+#   %lognamequot      Authenticated login/user with format: "john"
+#   %logname          Authenticated login/user with format: john
+#   %time1            Date and time with format: [dd/mon/yyyy:hh:mm:ss +0000] or [dd/mon/yyyy:hh:mm:ss]
+#   %time2            Date and time with format: yyyy-mm-dd hh:mm:ss
+#   %time3            Date and time with format: Mon dd hh:mm:ss or Mon dd hh:mm:ss yyyy
+#   %time4            Date and time with unix timestamp format: dddddddddd
+#   %methodurl        Method and URL with format: "GET /index.html HTTP/x.x"
+#   %methodurlnoprot  Method and URL with format: "GET /index.html"
+#   %method           Method with format: GET
+#   %url              URL only with format: /index.html
+#   %query            Query string (used by URLWithQuery option)
+#   %code             Return code status (with format for web log: 999)
+#   %bytesd           Size of document in bytes
+#   %refererquot      Referer page with format: "http://from.com/from.htm"
+#   %referer          Referer page with format: http://from.com/from.htm
+#   %uabracket        User agent with format: [Mozilla/4.0 (compatible, ...)]
+#   %uaquot           User agent with format: "Mozilla/4.0 (compatible, ...)"
+#   %ua               User agent with format: Mozilla/4.0_(compatible...)
+#   %gzipin           mod_gzip compression input bytes: In:XXX
+#   %gzipout          mod_gzip compression output bytes & ratio: Out:YYY:ZZpct.
+#   %gzipratio        mod_gzip compression ratio: ZZpct.
+#   %deflateratio     mod_deflate compression ratio with format: (ZZ)
+#   %email            EMail sender (for mail log)
+#   %email_r          EMail receiver (for mail log)
+#   %virtualname      Web sever virtual hostname. Use this tag when same log
+#                     contains data of several virtual web servers. AWStats
+#                     will discard records not in SiteDomain nor HostAliases
+#   %cluster          If log file is provided from several computers (merged by
+#                     logresolvemerge.pl), use this to define cluster id field.
+#   %extraX           Another field that you plan to use for building a
+#                     personalized report with ExtraSection feature (See later).
+#   If your log format has some fields not included in this list, use:
+#   %other            Means another not used field
+#   %otherquot        Means another not used double quoted field
+#
+# Examples for Apache combined logs (following two examples are equivalent):
+# LogFormat = 1
+# LogFormat = "%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot"
+#
+# Example for IIS:
+# LogFormat = 2
+#
+LogFormat = 1
+
+
+# If your log field's separator is not a space, you can change this parameter.
+# This parameter is not used if LogFormat is a predefined value (1,2,3,4)
+# Backslash can be used as escape character.
+# Example: " "
+# Example: "\t"
+# Example: "\|"
+# Example: ","
+# Default: " "
+#
+LogSeparator=" "
+
+
+# "SiteDomain" must contain the main domain name, or the main intranet web
+# server name, used to reach the web site.
+# If you share the same log file for several virtual web servers, this
+# parameter is used to tell AWStats to filter record that contains records for
+# this virtual host name only (So check that this virtual hostname can be
+# found in your log file and use a personalized log format that include the
+# %virtualname tag).
+# But for multi hosting a better solution is to have one log file for each
+# virtual web server. In this case, this parameter is only used to generate
+# full URL's links when ShowLinksOnUrl option is set to 1.
+# If analyzing mail log, enter here the domain name of mail server.
+# Example: "myintranetserver"
+# Example: "www.domain.com"
+# Example: "ftp.domain.com"
+# Example: "domain.com"
+#
+SiteDomain="mirrors.fedoraproject.org"
+
+
+# Enter here all other possible domain names, addresses or virtual host
+# aliases someone can use to access your site. Try to keep only the minimum
+# number of possible names/addresses to have the best performances.
+# You can repeat the "SiteDomain" value in this list.
+# This parameter is used to analyze referer field in log file and to help
+# AWStats to know if a referer URL is a local URL of same site or an URL of
+# another site.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Note: You can also use @/mypath/myfile if list of aliases are in a file.
+# Example: "www.myserver.com localhost 127.0.0.1 REGEX[mydomain\.(net|org)$]"
+#
+HostAliases="REGEX[.*\.fedoraproject\.org]"
+
+
+# If you want to have hosts reported by name instead of ip address, AWStats
+# need to make reverse DNS lookups (if not already done in your log file).
+# With DNSLookup to 0, all hosts will be reported by their IP addresses and
+# not by the full hostname of visitors (except if names are already available
+# in log file).
+# If you want/need to set DNSLookup to 1, don't forget that this will reduce
+# dramatically AWStats update process speed. Do not use on large web sites.
+# Note: Reverse DNS lookup is done on IPv4 only (Enable ipv6 plugin for IPv6).
+# Note: Result of DNS Lookup can be used to build the Country report. However
+# it is highly recommanded to enable the plugin 'geoipfree' or 'geoip' to
+# have an accurate Country report with no need of DNS Lookup.
+# Possible values:
+# 0 - No DNS Lookup
+# 1 - DNS Lookup is fully enabled
+# 2 - DNS Lookup is made only from static DNS cache file (if it exists)
+# Default: 2
+# 
+DNSLookup=2
+
+
+# When AWStats updates its statistics, it stores results of its analysis in 
+# files (AWStats database). All those files are written in the directory
+# defined by the "DirData" parameter. Set this value to the directory where
+# you want AWStats to save its database and working files into.
+# Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser"
+# feature (see later), you need "Write" permissions by web server user on this
+# directory (and "Modify" for Windows NTFS file systems).
+# Example: "/var/lib/awstats"
+# Example: "../data"
+# Example: "C:/awstats_data_dir"
+# Default: "."          (means same directory as awstats.pl)
+#
+DirData="/var/lib/awstats"
+
+
+# Relative or absolute web URL of your awstats cgi-bin directory.
+# This parameter is used only when AWStats is run from command line
+# with -output option (to generate links in HTML reported page).
+# Example: "/awstats"
+# Default: "/cgi-bin"   (means awstats.pl is in "/yourwwwroot/cgi-bin")
+#
+DirCgi="/awstats"
+
+
+# Relative or absolute web URL of your awstats icon directory.
+# If you build static reports ("... -output > outputpath/output.html"), enter
+# path of icon directory relative to the output directory 'outputpath'.
+# Example: "/awstatsicons"
+# Example: "../icon"
+# Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon")
+#
+DirIcons="/awstatsicons"
+
+
+# When this parameter is set to 1, AWStats adds a button on report page to
+# allow to "update" statistics from a web browser. Warning, when "update" is
+# made from a browser, AWStats is run as a CGI by the web server user defined
+# in your web server (user "nobody" by default with Apache, "IUSR_XXX" with
+# IIS), so the "DirData" directory and all already existing history files
+# awstatsMMYYYY[.xxx].txt must be writable by this user. Change permissions if
+# necessary to "Read/Write" (and "Modify" for Windows NTFS file systems).
+# Warning: Update process can be long so you might experience "time out"
+# browser errors if you don't launch AWStats frequently enough.
+# When set to 0, update is only made when AWStats is run from the command
+# line interface (or a task scheduler).
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowToUpdateStatsFromBrowser=0
+
+
+# AWStats saves and sorts its database on a month basis (except if using
+# databasebreak option from command line). 
+# However, if you choose the -month=all from command line or
+# value '-Year-' from CGI combo form to have a report for all year, AWStats
+# needs to reload all data for full year (each month), and sort them,
+# requiring a large amount of time, memory and CPU. This might be a problem
+# for web hosting providers that offer AWStats for large sites, on shared
+# servers, to non CPU cautious customers.
+# For this reason, the 'full year' is only enabled on Command Line by default.
+# You can change this by setting this parameter to 0, 1, 2 or 3.
+# Possible values:
+#  0 - Never allowed
+#  1 - Allowed on CLI only, -Year- value in combo is not visible
+#  2 - Allowed on CLI only, -Year- value in combo is visible but not allowed
+#  3 - Possible on CLI and CGI
+# Default: 2
+#
+AllowFullYearView=2
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When the update process runs, AWStats can set a lock file in TEMP or TMP
+# directory. This lock is to avoid to have 2 update processes running at the
+# same time to prevent unknown conflicts problems and avoid DoS attacks when
+# AllowToUpdateStatsFromBrowser is set to 1.
+# Because, when you use lock file, you can experience sometimes problems in
+# lock file not correctly removed (killed process for example requires that
+# you remove the file manualy), this option is not enabled by default (Do
+# not enable this option with no console server access).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+EnableLockForUpdate=1
+
+
+# AWStats can do reverse DNS lookups through a static DNS cache file that was
+# previously created manually. If no path is given in static DNS cache file
+# name, AWStats will search DirData directory. This file is never changed.
+# This option is not used if DNSLookup=0.
+# Note: DNS cache file format is 'minsince1970 ipaddress resolved_hostname'
+# or just 'ipaddress resolved_hostname'
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscache"
+# Default: "dnscache.txt"
+#
+DNSStaticCacheFile="dnscache.txt"
+
+
+# AWStats can do reverse DNS lookups through a DNS cache file that was created
+# by a previous run of AWStats. This file is erased and recreated after each
+# statistics update process. You don't need to create and/or edit it.
+# AWStats will read and save this file in DirData directory.
+# This option is used only if DNSLookup=1.
+# Note: If a DNSStaticCacheFile is available, AWStats will check for DNS
+# lookup in DNSLastUpdateCacheFile after checking into DNSStaticCacheFile.
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscachelastupdate"
+# Default: "dnscachelastupdate.txt"
+#
+DNSLastUpdateCacheFile="dnscachelastupdate.txt"
+
+
+# You can specify specific IP addresses that should NOT be looked up in DNS.
+# This option is used only if DNSLookup=1.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "123.123.123.123 REGEX[^192\.168\.]"
+# Default: ""
+#
+SkipDNSLookupFor=""
+
+
+# The following two parameters allow you to protect a config file from being
+# read by AWStats when called from a browser if web user has not been
+# authenticated. Your AWStats program must be in a web protected "realm" (With
+# Apache, you can use .htaccess files to do so. With other web servers, see
+# your server setup manual).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowAccessFromWebToAuthenticatedUsersOnly=0
+
+
+# This parameter gives the list of all authorized authenticated users to view
+# statistics for this domain/config file. This parameter is used only if
+# AllowAccessFromWebToAuthenticatedUsersOnly is set to 1.
+# Change : Effective immediatly
+# Example: "user1 user2"
+# Example: "__REMOTE_USER__"
+# Default: ""
+#
+AllowAccessFromWebToFollowingAuthenticatedUsers=""
+
+
+# When this parameter is defined to something, the IP address of the user that
+# reads its statistics from a browser (when AWStats is used as a CGI) is
+# checked and must match one of the IP address values or ranges.
+# Change : Effective immediatly
+# Example: "127.0.0.1 123.123.123.1-123.123.123.255"
+# Default: ""
+#
+AllowAccessFromWebToFollowingIPAddresses=""
+
+
+# If the "DirData" directory (see above) does not exist, AWStats return an
+# error. However, you can ask AWStats to create it.
+# This option can be used by some Web Hosting Providers that has defined a 
+# dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and
+# don't want to have to create a new directory each time they add a new user.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+CreateDirDataIfNotExists=0
+
+
+# You can choose in which format the Awstats history database is saved.
+# Note: Using "xml" format make AWStats building database files three times
+# larger than using "text" format.
+# Change : Database format is switched after next update
+# Possible values: text or xml
+# Default: text
+#
+BuildHistoryFormat=text
+
+
+# If you prefer having the report output pages be built as XML compliant pages
+# instead of simple HTML pages, you can set this to 'xhtml' (May not work
+# properly with old browsers).
+# Change : Effective immediatly
+# Possible values: html or xhtml
+# Default: html
+#
+BuildReportFormat=html
+
+
+# AWStats databases can be updated from command line of from a browser (when
+# used as a cgi program). So AWStats database files need write permission
+# for both command line user and default web server user (nobody for Unix,
+# IUSR_xxx for IIS/Windows,...).
+# To avoid permission problems between update process (run by an admin user)
+# and CGI process (ran by a low level user), AWStats can save its database 
+# files with read and write permissions for everyone.
+# By default, AWStats keeps default user permissions on updated files. If you 
+# set AllowToUpdateStatsFromBrowser to 1, you can change this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+SaveDatabaseFilesWithPermissionsForEveryone=0
+
+
+# AWStats can purge log file, after analyzing it. Note that AWStats is able
+# to detect new lines in a log file, to process only them, so you can launch
+# AWStats as often as you want, even with this parameter to 0.
+# With 0, no purge is made, so you must use a scheduled task or a web server
+# that make this purge frequently.
+# With 1, the purge of the log file is made each time AWStats update is run.
+# This parameter doesn't work with IIS (This web server doesn't let its log
+# file to be purged).
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+PurgeLogFile=0
+
+
+# When PurgeLogFile is setup to 1, AWStats will clean your log file after
+# processing it. You can however keep an archive file of all processed log
+# records by setting this parameter (For example if you want to use another
+# log analyzer). The archived log file is saved in "DirData" with name
+# awstats_archive.configname[.suffix].log
+# This parameter is not used if PurgeLogFile=0
+# Change : Effective for new updates only
+# Possible values: 0, 1, or tags (See LogFile parameter) for suffix
+# Example: 1
+# Example: %YYYY%MM%DD
+# Default: 0
+#
+ArchiveLogRecords=0
+
+
+# Each time you run the update process, AWStats overwrites the 'historic file'
+# for the month (awstatsMMYYYY[.*].txt) with the updated one.
+# When write errors occurs (IO, disk full,...), this historic file can be
+# corrupted and must be deleted. Because this file contains information of all
+# past processed log files, you will loose old stats if removed. So you can
+# ask AWStats to save last non corrupted file in a .bak file. This file is
+# stored in "DirData" directory with other 'historic files'.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+KeepBackupOfHistoricFiles=0
+
+
+# Default index page name for your web server.
+# Change : Effective for new updates only
+# Example: "index.php index.html default.html"
+# Default: "index.html"
+#
+DefaultFile="index.html"
+
+
+# Do not include access from clients that match following criteria.
+# If your log file contains IP addresses in host field, you must enter here
+# matching IP addresses criteria.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "SkipHosts" is "OnlyHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Example: "localhost REGEX[^.*\.localdomain$]"
+# Default: ""
+#
+SkipHosts="127.0.0.1"
+
+
+# Do not include access from clients with a user agent that match following
+# criteria. If you want to exclude a robot, you should update the robots.pm
+# file instead of this parameter.
+# The opposite parameter of "SkipUserAgents" is "OnlyUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "konqueror REGEX[ua_test_v\d\.\d]"
+# Default: ""
+#
+SkipUserAgents=""
+
+
+# Use SkipFiles to ignore access to URLs that match one of following entries.
+# You can enter a list of not important URLs (like framed menus, hidden pages,
+# etc...) to exclude them from statistics. You must enter here exact relative
+# URL as found in log file, or a matching REGEX value. Check apply on URL with
+# all its query paramaters.
+# For example, to ignore /badpage.php, just add "/badpage.php". To ignore all
+# pages in a particular directory, add "REGEX[^\/directorytoexclude]".
+# The opposite parameter of "SkipFiles" is "OnlyFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "/badpage.php /page.php?param=x REGEX[^\/excludedirectory]"
+# Default: ""
+#
+SkipFiles=""
+
+
+# Use SkipReferrersBlackList if you want to exclude records coming from a SPAM
+# referrer. Parameter must receive a local file name containing rules applied
+# on referrer field. If parameter is empty, no filter is applied.
+# An example of such a file is available in lib/blacklist.txt
+# You can download updated version at http://www.jayallen.org/comment_spam/
+# Change : Effective for new updates only
+# Example: "/mylibpath/blacklist.txt"
+# Default: ""
+#
+# WARNING!! Using this feature make AWStats running very slower (5 times slower
+# with black list file provided with AWStats !
+#
+SkipReferrersBlackList=""
+
+
+# Include in stats, only accesses from hosts that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular hosts, you can add those host names in
+# this parameter.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "OnlyHosts" is "SkipHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Default: ""
+#
+OnlyHosts=""
+
+
+# Include in stats, only accesses from user agent that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular browsers, you can add their user agents
+# string in this parameter.
+# The opposite parameter of "OnlyUserAgents" is "SkipUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "msie"
+# Default: ""
+#
+OnlyUserAgents=""
+
+
+# Include in stats, only accesses to URLs that match one of following entries.
+# For example, if you want AWStats to filter access to keep only stats that
+# match a particular string, like a particular directory, you can add this
+# directory name in this parameter.
+# The opposite parameter of "OnlyFiles" is "SkipFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "REGEX[marketing_directory] REGEX[office\/.*\.(csv|sxw)$]"
+# Default: ""
+#
+OnlyFiles=""
+
+
+# Add here a list of kind of url (file extension) that must be counted as
+# "Hit only" and not as a "Hit" and "Page/Download". You can set here all
+# image extensions as they are hit downloaded that must be counted but they
+# are not viewed pages. URLs with such extensions are not included in the TOP
+# Pages/URL report.
+# Note: If you want to exclude particular URLs from stats (No Pages and no
+# Hits reported), you must use SkipFiles parameter.
+# Change : Effective for new updates only
+# Example: "css js class gif jpg jpeg png bmp ico zip arj gz z wav mp3 wma mpg"
+# Example: ""
+# Default: "css js class gif jpg jpeg png bmp ico"
+#
+NotPageList="css js class gif jpg jpeg png bmp ico swf"
+
+
+# By default, AWStats considers that records found in web log file are
+# successful hits if HTTP code returned by server is a valid HTTP code (200
+# and 304). Any other code are reported in HTTP status chart.
+# Note that HTTP 'control codes', like redirection (302, 305) are not added by
+# default in this list as they are not pages seen by a visitor but are
+# protocol exchange codes to tell the browser to ask another page. Because
+# this other page will be counted and seen with a 200 or 304 code, if you 
+# add such codes, you will have 2 pages viewed reported for only one in facts.
+# Change : Effective for new updates only
+# Example: "200 304 302 305"
+# Default: "200 304"
+#
+ValidHTTPCodes="200 304"
+
+
+# By default, AWStats considers that records found in mail log file are
+# successful mail transfers if field that represent return code in analyzed
+# log file match values defined by this parameter.
+# Change : Effective for new updates only
+# Example: "1 250 200"
+# Default: "1 250"
+#
+ValidSMTPCodes="1 250"
+
+
+# Some web servers on some Operating systems (IIS-Windows) consider that a
+# login with same value but different case are the same login. To tell AWStats
+# to also consider them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+AuthenticatedUsersNotCaseSensitive=0
+
+
+# Some web servers on some Operating systems (IIS-Windows) considers that two
+# URLs with same value but different case are the same URL. To tell AWStats to
+# also considers them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+URLNotCaseSensitive=0
+
+
+# Keep or remove the anchor string you can find in some URLs.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+URLWithAnchor=0
+
+
+# In URL links, "?" char is used to add parameter's list in URLs. Syntax is:
+# /mypage.html?param1=value1&param2=value2
+# However, some servers/sites use also other chars to isolate dynamic part of
+# their URLs. You can complete this list with all such characters.
+# Change : Effective for new updates only
+# Example: "?;,"
+# Default: "?;"
+#
+URLQuerySeparators="?;"
+
+
+# Keep or remove the query string to the URL in the statistics for individual
+# pages. This is primarily used to differentiate between the URLs of dynamic
+# pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as two
+# different pages.
+# Warning, when set to 1, memory required to run AWStats is dramatically
+# increased if you have a lot of changing URLs (for example URLs with a random
+# id inside). Such web sites should not set this option to 1 or use seriously
+# the next parameter URLWithQueryWithOnlyFollowingParameters (or eventually 
+# URLWithQueryWithoutFollowingParameters).
+# Change : Effective for new updates only
+# Possible values:
+# 0 - URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used     (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLWithQuery=0
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to keep only parameters
+# you need (if you know them) before counting, manipulating and storing URL.
+# Enter here list of wanted parameters. For example, with "param", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithoutFollowingParameters.
+# Change : Effective for new updates only
+# Example: "param"
+# Default: ""
+# 
+URLWithQueryWithOnlyFollowingParameters=""
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to remove such parameters
+# from the URL before counting, manipulating and storing URL. Enter here list
+# of all non wanted parameters. For example if you enter "id", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithOnlyFollowingParameters.
+# Change : Effective for new updates only
+# Example: "PHPSESSID jsessionid"
+# Default: ""
+# 
+URLWithQueryWithoutFollowingParameters=""
+
+
+# Keep or remove the query string to the referrer URL in the statistics for
+# external referrer pages. This is used to differentiate between the URLs of
+# dynamic referrer pages. If set to 1, mypage.html?id=x and mypage.html?id=y
+# are counted as two different referrer pages.
+# Change : Effective for new updates only
+# Possible values:
+# 0 - Referrer URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used      (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLReferrerWithQuery=0
+
+
+# AWStats can detect setup problems or show you important informations to have
+# a better use. Keep this to 1, except if AWStats says you can change it.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 1
+#
+WarningMessages=1
+
+
+# When an error occurs, AWStats outputs a message related to errors. If you
+# want (in most cases for security reasons) to have no error messages, you
+# can set this parameter to your personalized generic message.
+# Change : Effective immediatly
+# Example: "An error occurred. Contact your Administrator"
+# Default: ""
+#
+ErrorMessages=""
+
+
+# AWStat can be run with debug=x parameter to output various informations
+# to help in debugging or solving troubles. If you want to allow this (not
+# enabled by default for security reasons), set this parameter to 0.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+DebugMessages=0
+
+
+# To help you to detect if your log format is good, AWStats reports an error
+# if all the first NbOfLinesForCorruptedLog lines have a format that does not
+# match the LogFormat parameter.
+# However, some worm virus attack on your web server can result in a very high
+# number of corrupted lines in your log. So if you experience awstats stop
+# because of bad virus records at the beginning of your log file, you can
+# increase this parameter (very rare).
+# Change : Effective for new updates only
+# Default: 50
+#
+NbOfLinesForCorruptedLog=50
+
+
+# For some particular integration needs, you may want to have CGI links to
+# point to another script than awstats.pl.
+# Use the name of this script in WrapperScript parameter.
+# Change : Effective immediatly
+# Example: "awstatslauncher.pl"
+# Default: ""
+#
+WrapperScript=""
+
+
+# DecodeUA must be set to 1 if you use Roxen web server. This server converts
+# all spaces in user agent field into %20. This make the AWStats robots, OS
+# and browsers detection fail in some cases. Just change it to 1 if and only
+# if your web server is Roxen.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+DecodeUA=0
+
+
+# MiscTrackerUrl can be used to make AWStats able to detect some miscellaneous
+# things, that can not be tracked on other way, like:
+# - Javascript disabled
+# - Java enabled
+# - Screen size
+# - Color depth
+# - Macromedia Director plugin
+# - Macromedia Shockwave plugin
+# - Realplayer G2 plugin
+# - QuickTime plugin
+# - Mediaplayer plugin
+# - Acrobat PDF plugin
+# To enable all these features, you must copy the awstats_misc_tracker.js file
+# into a /js/ directory stored in your web document root and add the following
+# HTML code at the end of your index page (but before </BODY>) :
+#
+# <script language=javascript src="/js/awstats_misc_tracker.js"></script>
+# <noscript><img src="/js/awstats_misc_tracker.js?nojs=y" height=0 width=0 border=0 style="display: none"></noscript>
+#
+# If code is not added in index page, all those detection capabilities will be
+# disabled. You must also check that ShowScreenSizeStats and ShowMiscStats
+# parameters are set to 1 to make results appear in AWStats report page.
+# If you want to use another directory than /js/, you must also change the
+# awstatsmisctrackerurl variable into the awstats_misc_tracker.js file.
+# Change : Effective for new updates only.
+# Possible value: URL of javascript tracker file added in your HTML code.
+# Default: "/js/awstats_misc_tracker.js"
+#
+MiscTrackerUrl="/js/awstats_misc_tracker.js"
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# The following values allow you to define accuracy of AWStats entities
+# (robots, browsers, os, referers, file types) detection.
+# It might be a good idea for large web sites or ISP that provides AWStats to
+# high number of customers, to set this parameter to 1 (or 0), instead of 2.
+# Possible values:
+#    0      = No detection,
+#    1      = Medium/Standard detection
+#    2      = Full detection
+# Change : Effective for new updates only
+# Note   : LevelForBrowsersDetection can also accept value "allphones". This
+#          enable detailed detection of phone/pda browsers.
+# Default: 2 (0 for LevelForWormsDetection)
+#
+LevelForBrowsersDetection=2         # 0 disables Browsers detection.
+                                    # 2 reduces AWStats speed by 2%
+                                    # allphones reduces AWStats speed by 5%
+LevelForOSDetection=2               # 0 disables OS detection.
+                                    # 2 reduces AWStats speed by 3%
+LevelForRefererAnalyze=2            # 0 disables Origin detection.
+                                    # 2 reduces AWStats speed by 14%
+LevelForRobotsDetection=2           # 0 disables Robots detection.
+                                    # 2 reduces AWStats speed by 2.5%
+LevelForSearchEnginesDetection=2    # 0 disables Search engines detection.
+                                    # 2 reduces AWStats speed by 9%
+LevelForKeywordsDetection=2         # 0 disables Keyphrases/Keywords detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForFileTypesDetection=2        # 0 disables File types detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForWormsDetection=0            # 0 disables Worms detection.
+                                    # 2 reduces AWStats speed by 15%
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When you use AWStats as a CGI, you can have the reports shown in HTML frames.
+# Frames are only available for report viewed dynamically. When you build
+# pages from command line, this option is not used and no frames are built.
+# Possible values: 0 or 1
+# Default: 1
+#
+UseFramesWhenCGI=1
+
+
+# This parameter asks your browser to open detailed reports into a different
+# window than the main page.
+# Possible values:
+# 0 - Open all in same browser window
+# 1 - Open detailed reports in another window except if using frames
+# 2 - Open always in a different window even if reports are framed
+# Default: 1
+#
+DetailedReportsOnNewWindows=1
+
+
+# You can add, in the HTML report page, a cache lifetime (in seconds) that
+# will be returned to the browser in HTTP header answer by server.
+# This parameter is not used when reports are built with -staticlinks option.
+# Example: 3600
+# Default: 0
+#
+Expires=3600
+
+
+# To avoid too large web pages, you can ask AWStats to limit number of rows of
+# all reported charts to this number when no other limits apply.
+# Default: 1000
+#
+MaxRowsInHTMLOutput=1000
+
+
+# Set your primary language (ISO-639-1 language codes).
+# Possible values:
+#  Albanian=al, Bosnian=ba, Bulgarian=bg, Catalan=ca,
+#  Chinese (Taiwan)=tw, Chinese (Simpliefied)=cn, Croatian=hr, Czech=cz,
+#  Danish=dk, Dutch=nl, English=en, Estonian=et, Euskara=eu, Finnish=fi,
+#  French=fr, Galician=gl, German=de, Greek=gr, Hebrew=he, Hungarian=hu,
+#  Icelandic=is, Indonesian=id, Italian=it, Japanese=jp, Korean=ko,
+#  Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl,
+#  Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru,
+#  Serbian=sr, Slovak=sk, Slovenian=si, Spanish=es, Swedish=se, Turkish=tr,
+#  Ukrainian=ua, Welsh=cy.
+#  First available language accepted by browser=auto
+# Default: "auto"
+#
+Lang="auto"
+
+
+# Set the location of language files.
+# Example: "/usr/share/awstats/lang"
+# Default: "./lang" (means lang directory is in same location than awstats.pl)
+#
+DirLang="./lang"
+
+
+# Show menu header with reports' links
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowMenu=1					
+
+
+# You choose here which reports you want to see in the main page and what you
+# want to see in those reports.
+# Possible values:
+#  0  - Report is not shown at all
+#  1  - Report is shown in main page with an entry in menu and default columns
+# XYZ - Report shows column informations defined by code X,Y,Z...
+#       X,Y,Z... are code letters among the following:
+#        U = Unique visitors
+#        V = Visits
+#        P = Number of pages
+#        H = Number of hits (or mails)
+#        B = Bandwith (or total mail size for mail logs)
+#        L = Last access date
+#        E = Entry pages
+#        X = Exit pages
+#        C = Web compression (mod_gzip,mod_deflate)
+#        M = Average mail size (mail logs)
+#
+
+# Show monthly summary
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowSummary=UVPHB
+
+# Show monthly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowMonthStats=UVPHB
+
+# Show days of month chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: VPHB, Possible column codes: VPHB
+ShowDaysOfMonthStats=VPHB
+
+# Show days of week chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDaysOfWeekStats=PHB
+
+# Show hourly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowHoursStats=PHB
+
+# Show domains/country chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDomainsStats=PHB
+
+# Show hosts chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHBL, Possible column codes: PHBL
+ShowHostsStats=PHBL
+
+# Show authenticated users chart
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHBL
+ShowAuthenticatedUsers=0
+
+# Show robots chart
+# Context: Web, Streaming
+# Default: HBL, Possible column codes: HBL
+ShowRobotsStats=HBL
+
+# Show worms chart
+# Context: Web, Streaming
+# Default: 0 (If set to other than 0, see also LevelForWormsDetection), Possible column codes: HBL
+ShowWormsStats=0
+
+# Show email senders chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailSenders=0
+
+# Show email receivers chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailReceivers=0
+
+# Show session chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowSessionsStats=1
+
+# Show pages-url chart.
+# Context: Web, Streaming, Ftp
+# Default: PBEX, Possible column codes: PBEX
+ShowPagesStats=PBEX
+
+# Show file types chart.
+# Context: Web, Streaming, Ftp
+# Default: HB, Possible column codes: HBC
+ShowFileTypesStats=HB
+
+# Show file size chart (Not yet available)
+# Context: Web, Streaming, Mail, Ftp
+# Default: 1, Possible column codes: None
+ShowFileSizesStats=0		
+
+# Show operating systems chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowOSStats=1
+
+# Show browsers chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowBrowsersStats=1
+
+# Show screen size chart
+# Context: Web, Streaming
+# Default: 0 (If set to 1, see also MiscTrackerUrl), Possible column codes: None
+ShowScreenSizeStats=0
+
+# Show origin chart
+# Context: Web, Streaming
+# Default: PH, Possible column codes: PH
+ShowOriginStats=PH
+
+# Show keyphrases chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeyphrasesStats=1
+
+# Show keywords chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeywordsStats=1
+
+# Show misc chart
+# Context: Web, Streaming
+# Default: a (See also MiscTrackerUrl parameter), Possible column codes: anjdfrqwp
+ShowMiscStats=a
+
+# Show http errors chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowHTTPErrorsStats=1
+
+# Show smtp errors chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: None
+ShowSMTPErrorsStats=0
+
+# Show the cluster report (Your LogFormat must contains the %cluster tag)
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHB
+ShowClusterStats=0
+
+
+# Some graphical reports are followed by the data array of values.
+# If you don't want this array (to reduce the report size for example), you
+# can set thoose options to 0.
+# Possible values: 0 or 1
+# Default: 1
+#
+# Data array values for the ShowMonthStats report
+AddDataArrayMonthStats=1
+# Data array values for the ShowDaysOfMonthStats report
+AddDataArrayShowDaysOfMonthStats=1
+# Data array values for the ShowDaysOfWeekStats report
+AddDataArrayShowDaysOfWeekStats=1
+# Data array values for the ShowHoursStats report
+AddDataArrayShowHoursStats=1
+
+
+# In the Origin chart, you have stats on where your hits came from. You can
+# include hits on pages that come from pages of same sites in this chart.
+# Possible values: 0 or 1
+# Default: 0
+#
+IncludeInternalLinksInOriginSection=0
+
+
+# The following parameters can be used to choose the maximum number of lines
+# shown for the particular following reports.
+#
+# Stats by countries/domains
+MaxNbOfDomain = 10
+MinHitDomain  = 1
+# Stats by hosts
+MaxNbOfHostsShown = 10
+MinHitHost    = 1
+# Stats by authenticated users
+MaxNbOfLoginShown = 10
+MinHitLogin   = 1
+# Stats by robots
+MaxNbOfRobotShown = 10
+MinHitRobot   = 1
+# Stats by pages
+MaxNbOfPageShown = 10
+MinHitFile    = 1
+# Stats by OS
+MaxNbOfOsShown = 10
+MinHitOs      = 1
+# Stats by browsers
+MaxNbOfBrowsersShown = 10
+MinHitBrowser = 1
+# Stats by screen size
+MaxNbOfScreenSizesShown = 5
+MinHitScreenSize = 1
+# Stats by window size (following 2 parameters are not yet used)
+MaxNbOfWindowSizesShown = 5
+MinHitWindowSize = 1
+# Stats by referers
+MaxNbOfRefererShown = 10
+MinHitRefer   = 1
+# Stats for keyphrases
+MaxNbOfKeyphrasesShown = 10
+MinHitKeyphrase = 1
+# Stats for keywords
+MaxNbOfKeywordsShown = 10
+MinHitKeyword = 1
+# Stats for sender or receiver emails
+MaxNbOfEMailsShown = 20
+MinHitEMail   = 1
+
+
+# Choose if you want the week report to start on sunday or monday
+# Possible values:
+# 0 - Week starts on sunday
+# 1 - Week starts on monday
+# Default: 1
+#
+FirstDayOfWeek=1
+
+
+# List of visible flags that link to other language translations.
+# See Lang parameter for list of allowed flag/language codes.
+# If you don't want any flag link, set ShowFlagLinks to "".
+# This parameter is used only if ShowMenu parameter is set to 1.
+# Possible values: "" or "language_codes_separated_by_space"
+# Example: "en es fr nl de"
+# Default: ""
+#
+ShowFlagLinks=""
+
+
+# Each URL, shown in stats report views, are links you can click.
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowLinksOnUrl=1
+
+
+# When AWStats builds HTML links in its report pages, it starts those links
+# with "http://". However some links might be HTTPS links, so you can enter
+# here the root of all your HTTPS links. If all your site is a SSL web site,
+# just enter "/".
+# This parameter is not used if ShowLinksOnUrl is 0.
+# Example: "/shopping"
+# Example: "/"
+# Default: ""
+#
+UseHTTPSLinkForUrl=""
+
+
+# Maximum length of URL part shown on stats page (number of characters).
+# This affects only URL visible text, links still work.
+# Default: 64
+#
+MaxLengthOfShownURL=64
+
+
+# You can enter HTML code that will be added at the top of AWStats reports.
+# Default: ""
+#
+HTMLHeadSection=""
+
+
+# You can enter HTML code that will be added at the end of AWStats reports.
+# Great to add advert ban.
+# Default: ""
+#
+HTMLEndSection=""
+
+
+# You can set Logo and LogoLink to use your own logo.
+# Logo must be the name of image file (must be in $DirIcons/other directory).
+# LogoLink is the expected URL when clicking on Logo.
+# Default: "awstats_logo6.png"
+#
+Logo="awstats_logo6.png"
+LogoLink="http://awstats.sourceforge.net"
+
+
+# Value of maximum bar width/height for horizontal/vertical HTML graphics bars.
+# Default: 260/90
+#
+BarWidth   = 260
+BarHeight  = 90
+
+
+# You can ask AWStats to use a particular CSS (Cascading Style Sheet) to
+# change its look. To create a style sheet, you can use samples provided with
+# AWStats in wwwroot/css directory.
+# Example: "/awstatscss/awstats_bw.css"
+# Example: "/css/awstats_bw.css"
+# Default: ""
+#
+StyleSheet=""
+
+
+# Those color parameters can be used (if StyleSheet parameter is not used)
+# to change AWStats look.
+# Example: color_name="RRGGBB"	# RRGGBB is Red Green Blue components in Hex
+#
+color_Background="FFFFFF"		# Background color for main page (Default = "FFFFFF")
+color_TableBGTitle="CCCCDD"		# Background color for table title (Default = "CCCCDD")
+color_TableTitle="000000"		# Table title font color (Default = "000000")
+color_TableBG="CCCCDD"			# Background color for table (Default = "CCCCDD")
+color_TableRowTitle="FFFFFF"	# Table row title font color (Default = "FFFFFF")
+color_TableBGRowTitle="ECECEC"	# Background color for row title (Default = "ECECEC")
+color_TableBorder="ECECEC"		# Table border color (Default = "ECECEC")
+color_text="000000"				# Color of text (Default = "000000")
+color_textpercent="606060"		# Color of text for percent values (Default = "606060")
+color_titletext="000000"		# Color of text title within colored Title Rows (Default = "000000")
+color_weekend="EAEAEA"			# Color for week-end days (Default = "EAEAEA")
+color_link="0011BB"				# Color of HTML links (Default = "0011BB")
+color_hover="605040"			# Color of HTML on-mouseover links (Default = "605040") 
+color_u="FFAA66"				# Background color for number of unique visitors (Default = "FFAA66")
+color_v="F4F090"				# Background color for number of visites (Default = "F4F090")
+color_p="4477DD"				# Background color for number of pages (Default = "4477DD")
+color_h="66DDEE"				# Background color for number of hits (Default = "66DDEE")
+color_k="2EA495"				# Background color for number of bytes (Default = "2EA495")
+color_s="8888DD"				# Background color for number of search (Default = "8888DD")
+color_e="CEC2E8"				# Background color for number of entry pages (Default = "CEC2E8")
+color_x="C1B2E2"				# Background color for number of exit pages (Default = "C1B2E2")
+
+
+
+#-----------------------------------------------------------------------------
+# PLUGINS
+#-----------------------------------------------------------------------------
+
+# Add here all plugin files you want to load.
+# Plugin files must be .pm files stored in 'plugins' directory.
+# Uncomment LoadPlugin lines to enable a plugin after checking that perl
+# modules required by the plugin are installed.
+
+# Plugin: Tooltips
+# Perl modules required: None
+# Add some tooltips help on HTML report pages.
+# Note that enabling this kind of help will increased HTML report pages size,
+# so server load and bandwidth.
+#
+LoadPlugin="tooltips"
+
+# Plugin: DecodeUTFKeys
+# Perl modules required: Encode and URI::Escape
+# Allow AWStats to show correctly (in language charset) keywords/keyphrases
+# strings even if they were UTF8 coded by the referer search engine.
+#
+#LoadPlugin="decodeutfkeys"
+
+# Plugin: IPv6
+# Perl modules required: Net::IP and Net::DNS
+# This plugin gives AWStats capability to make reverse DNS lookup on IPv6
+# addresses.
+# Note: If you are interested in having country report, you should use the
+# geoipfree or geoip plugin instead of enabled reverse DNS lookup.
+#
+#LoadPlugin="ipv6"
+
+# Plugin: HashFiles
+# Perl modules required: Storable
+# AWStats DNS cache files are read/saved as native hash files. This increases
+# DNS cache files loading speed, above all for very large web sites.
+#
+LoadPlugin="hashfiles"
+
+# Plugin: GeoIP
+# Perl modules required: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IP module 
+# from Maxmind, database more up to date) or the GeoIPfree plugin (need
+# Perl Geo::IPfree module, database less up to date).
+# This plugin reduces AWStats speed of 8% !
+#
+LoadPlugin="geoip GEOIP_STANDARD /usr/share/GeoIP/GeoIP.dat"
+
+# Plugin: GeoIPfree
+# Perl modules required: Geo::IPfree version 0.2+ (from Graciliano M.P.)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IPfree
+# module, database less up to date) or the GeoIP plugin (need Perl Geo::IP
+# module from Maxmind, database more up to date).
+# Note: Activestate provide a corrupted version of Geo::IPfree 0.2 Perl
+# module, so install it from elsewhere (from www.cpan.org for example).
+# This plugin reduces AWStats speed of 10% !
+#
+#LoadPlugin="geoipfree"
+
+# Plugin: GeoIP_Region_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by regions. Only regions for US and 
+# Canada can be detected.
+# Note: This plugin need Maxmind GeoIP Perl module AND the region database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Region database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_region_maxmind GEOIP_STANDARD /pathto/GeoIPRegion.dat"
+
+# Plugin: GeoIP_City_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by cities (with country and regions
+# informations for major countries).
+# Note: This plugin need Maxmind GeoIP Perl module AND the city database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the City database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /pathto/GeoIPCity.dat"
+
+# Plugin: GeoIP_ISP_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by ISP.
+# Note: This plugin need Maxmind GeoIP Perl module AND the ISP database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the ISP database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_isp_maxmind GEOIP_STANDARD /pathto/GeoIPISP.dat"
+
+# Plugin: GeoIP_Org_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by Organization name
+# Note: This plugin need Maxmind GeoIP Perl module AND the Org database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Org database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_org_maxmind GEOIP_STANDARD /pathto/GeoIPOrg.dat"
+
+# Plugin: UserInfo
+# Perl modules required: None
+# Add a text (Firtname, Lastname, Office Department, ...) in authenticated user
+# reports for each login value.
+# A text file called userinfo.myconfig.txt, with two fields (first is login,
+# second is text to show, separated by a tab char) must be created in DirData
+# directory.
+#
+#LoadPlugin="userinfo"
+
+# Plugin: HostInfo
+# Perl modules required: Net::XWhois
+# Add a column into host chart with a link to open a popup window that shows
+# info on host (like whois records).
+#
+#LoadPlugin="hostinfo"
+
+# Plugin: ClusterInfo
+# Perl modules required: None
+# Add a text (for example a full hostname) in cluster reports for each cluster
+# number.
+# A text file called clusterinfo.myconfig.txt, with two fields (first is
+# cluster number, second is text to show) separated by a tab char. must be
+# created into DirData directory.
+# Note this plugin is useless if ShowClusterStats is set to 0 or if you don't
+# use a personalized log format that contains %cluster tag.
+#
+#LoadPlugin="clusterinfo"
+
+# Plugin: UrlAliases
+# Perl modules required: None
+# Add a text (Page title, description...) in URL reports before URL value.
+# A text file called urlalias.myconfig.txt, with two fields (first is URL,
+# second is text to show, separated by a tab char) must be created into
+# DirData directory.
+#
+#LoadPlugin="urlalias"
+
+# Plugin: TimeHiRes
+# Perl modules required: Time::HiRes (if Perl < 5.8)
+# Time reported by -showsteps option is in millisecond. For debug purpose.
+#
+#LoadPlugin="timehires"		
+
+# Plugin: TimeZone
+# Perl modules required: Time::Local
+# Allow AWStats to correct a bad timezone for user of some IIS that use
+# GMT date in its log instead of local server time.
+# This module is useless for Apache and most IIS version.
+# This plugin reduces AWStats speed of 40% !!!!!!!
+#
+#LoadPlugin="timezone +2"
+
+# Plugin: Rawlog
+# Perl modules required: None
+# This plugin adds a form in AWStats main page to allow users to see raw
+# content of current log files. A filter is also available.
+#
+#LoadPlugin="rawlog"
+
+# Plugin: GraphApplet
+# Perl modules required: None
+# Supported charts are built by a 3D graphic applet.
+#
+#LoadPlugin="graphapplet /awstatsclasses"				# EXPERIMENTAL FEATURE
+
+
+
+#-----------------------------------------------------------------------------
+# EXTRA SECTIONS
+#-----------------------------------------------------------------------------
+
+# You can define your own charts, you choose here what are rows and columns
+# keys. This feature is particularly useful for marketing purpose, tracking
+# products orders for example.
+# For this, edit all parameters of Extra section. Each set of parameter is a
+# different chart. For several charts, duplicate section changing the number.
+# Note: Each Extra section reduces AWStats speed by 8%.
+#
+# WARNING: A wrong setup of Extra section might result in too large arrays
+# that will consume all your memory, making AWStats unusable after several
+# updates, so be sure to setup it correctly.
+# In most cases, you don't need this feature.
+#
+# ExtraSectionNameX is title of your personalized chart.
+# ExtraSectionCodeFilterX is list of codes the record code field must match.
+#   Put an empty string for no test on code.
+# ExtraSectionConditionX are conditions you can use to count or not the hit,
+#   Use one of the field condition
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,extraX)
+#   and a regex to match, after a coma. Use "||" for "OR".
+# ExtraSectionFirstColumnTitleX is the first column title of the chart.
+# ExtraSectionFirstColumnValuesX is a string to tell AWStats which field to
+#   extract value from
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,VHOST,extraX)
+#   and how to extract the value (using regex syntax). Each different value
+#   found will appear in first column of report on a different row. Be sure
+#   that list of different possible values will not grow indefinitely.
+# ExtraSectionFirstColumnFormatX is the string used to write value.
+# ExtraSectionStatTypesX are things you want to count. You can use standard
+#   code letters (P for pages,H for hits,B for bandwidth,L for last access).
+# ExtraSectionAddAverageRowX add a row at bottom of chart with average values.
+# ExtraSectionAddSumRowX add a row at bottom of chart with sum values.
+# MaxNbOfExtraX is maximum number of rows shown in chart.
+# MinHitExtraX is minimum number of hits required to be shown in chart.
+#
+
+# Example to report the 20 products the most ordered by "order.cgi" script
+#ExtraSectionName1="Product orders"
+#ExtraSectionCodeFilter1="200 304"
+#ExtraSectionCondition1="URL,\/cgi\-bin\/order\.cgi||URL,\/cgi\-bin\/order2\.cgi"
+#ExtraSectionFirstColumnTitle1="Product ID"
+#ExtraSectionFirstColumnValues1="QUERY_STRING,productid=([^&]+)"
+#ExtraSectionFirstColumnFormat1="%s"
+#ExtraSectionStatTypes1=PL
+#ExtraSectionAddAverageRow1=0
+#ExtraSectionAddSumRow1=1
+#MaxNbOfExtra1=20
+#MinHitExtra1=1
+
+
+# There is also a global parameter ExtraTrackedRowsLimit that limits the
+# number of possible rows an ExtraSection can report. This parameter is
+# here to protect too much memory use when you make a bad setup in your
+# ExtraSection. It applies to all ExtraSection independently meaning that
+# none ExtraSection can report more rows than value defined by ExtraTrackedRowsLimit.
+# If you know an ExtraSection will report more rows than its value, you should
+# increase this parameter or AWStats will stop with an error.
+# Example: 2000
+# Default: 500
+#
+ExtraTrackedRowsLimit=500
+
+
+#-----------------------------------------------------------------------------
+# INCLUDES
+#-----------------------------------------------------------------------------
+
+# You can include other config files using the directive with the name of the
+# config file.
+# This is particularly useful for users who have a lot of virtual servers, so
+# a lot of config files and want to maintain common values in only one file.
+# Note that when a variable is defined both in a config file and in an
+# included file, AWStats will use the last value read for parameters that
+# contains one value and AWStats will concat all values from both files for
+# parameters that are lists of values.
+#
+
+#Include ""
+
diff --git a/modules/awstats/files/awstats.translate.fedoraproject.org.conf b/modules/awstats/files/awstats.translate.fedoraproject.org.conf
new file mode 100644
index 0000000..f88ed73
--- /dev/null
+++ b/modules/awstats/files/awstats.translate.fedoraproject.org.conf
@@ -0,0 +1,1499 @@
+# AWSTATS CONFIGURE FILE 6.6
+#-----------------------------------------------------------------------------
+# Copy this file into awstats.www.mydomain.conf and edit this new config file
+# to setup AWStats (See documentation in docs/ directory).
+# The config file must be in /etc/awstats, /usr/local/etc/awstats or /etc (for
+# Unix/Linux) or same directory than awstats.pl (Windows, Mac, Unix/Linux...)
+# To include an environment variable in any parameter (AWStats will replace
+# it with its value when reading it), follow the example:
+# Parameter="__ENVNAME__"
+# Note that environment variable AWSTATS_CURRENT_CONFIG is always defined with
+# the config value in an AWStats running session and can be used like others.
+#-----------------------------------------------------------------------------
+# $Revision: 1.327 $ - $Author: eldy $ - $Date: 2006/04/21 22:28:49 $
+
+
+
+#-----------------------------------------------------------------------------
+# MAIN SETUP SECTION (Required to make AWStats work)
+#-----------------------------------------------------------------------------
+
+# "LogFile" contains the web, ftp or mail server log file to analyze.
+# Possible values: A full path, or a relative path from awstats.pl directory.
+# Example: "/var/log/apache/access.log"
+# Example: "../logs/mycombinedlog.log"
+# You can also use tags in this filename if you need a dynamic file name
+# depending on date or time (Replacement is made by AWStats at the beginning
+# of its execution). This is available tags :
+#   %YYYY-n  is replaced with 4 digits year we were n hours ago
+#   %YY-n    is replaced with 2 digits year we were n hours ago
+#   %MM-n    is replaced with 2 digits month we were n hours ago
+#   %MO-n    is replaced with 3 letters month we were n hours ago
+#   %DD-n    is replaced with day we were n hours ago
+#   %HH-n    is replaced with hour we were n hours ago
+#   %NS-n    is replaced with number of seconds at 00:00 since 1970
+#   %WM-n    is replaced with the week number in month (1-5)
+#   %Wm-n    is replaced with the week number in month (0-4)
+#   %WY-n    is replaced with the week number in year (01-52)
+#   %Wy-n    is replaced with the week number in year (00-51)
+#   %DW-n    is replaced with the day number in week (1-7, 1=sunday)
+#                              use n=24 if you need (1-7, 1=monday)
+#   %Dw-n    is replaced with the day number in week (0-6, 0=sunday)
+#                              use n=24 if you need (0-6, 0=monday)
+#   Use 0 for n if you need current year, month, day, hour...
+# Example: "/var/log/access_log.%YYYY-0%MM-0%DD-0.log"
+# Example: "C:/WINNT/system32/LogFiles/W3SVC1/ex%YY-24%MM-24%DD-24.log"
+# You can also use a pipe if log file come from a pipe :
+# Example: "gzip -d </var/log/apache/access.log.gz |"
+# If there are several log files from load balancing servers :
+# Example: "/pathtotools/logresolvemerge.pl *.log |"
+#
+LogFile="/usr/share/awstats/tools/logresolvemerge.pl /var/log/hosts/proxy*/*/*/*/http/translate.fedoraproject.org-access.log | sed -e 's/^ //' |"
+
+
+# Enter the log file type you want to analyze.
+# Possible values:
+#  W - For a web log file
+#  S - For a streaming log file
+#  M - For a mail log file
+#  F - For a ftp log file
+# Example: W
+# Default: W
+#
+LogType=W
+
+
+# Enter here your log format (Must match your web server config. See setup
+# instructions in documentation to know how to configure your web server to
+# have the required log format).
+# Possible values: 1,2,3,4 or "your_own_personalized_log_format"
+# 1 - Apache or Lotus Notes/Domino native combined log format (NCSA combined/XLF/ELF log format)
+# 2 - IIS or ISA format (IIS W3C log format). See FAQ-COM115 For ISA.
+# 3 - Webstar native log format.
+# 4 - Apache or Squid native common log format (NCSA common/CLF log format)
+#     With LogFormat=4, some features (browsers, os, keywords...) can't work.
+# "your_own_personalized_log_format" = If your log is ftp, mail or other format,
+#     you must use following keys to define the log format string (See FAQ for
+#     ftp, mail or exotic web log format examples):
+#   %host             Client hostname or IP address (or Sender host for mail log)
+#   %host_r           Receiver hostname or IP address (for mail log)
+#   %lognamequot      Authenticated login/user with format: "john"
+#   %logname          Authenticated login/user with format: john
+#   %time1            Date and time with format: [dd/mon/yyyy:hh:mm:ss +0000] or [dd/mon/yyyy:hh:mm:ss]
+#   %time2            Date and time with format: yyyy-mm-dd hh:mm:ss
+#   %time3            Date and time with format: Mon dd hh:mm:ss or Mon dd hh:mm:ss yyyy
+#   %time4            Date and time with unix timestamp format: dddddddddd
+#   %methodurl        Method and URL with format: "GET /index.html HTTP/x.x"
+#   %methodurlnoprot  Method and URL with format: "GET /index.html"
+#   %method           Method with format: GET
+#   %url              URL only with format: /index.html
+#   %query            Query string (used by URLWithQuery option)
+#   %code             Return code status (with format for web log: 999)
+#   %bytesd           Size of document in bytes
+#   %refererquot      Referer page with format: "http://from.com/from.htm"
+#   %referer          Referer page with format: http://from.com/from.htm
+#   %uabracket        User agent with format: [Mozilla/4.0 (compatible, ...)]
+#   %uaquot           User agent with format: "Mozilla/4.0 (compatible, ...)"
+#   %ua               User agent with format: Mozilla/4.0_(compatible...)
+#   %gzipin           mod_gzip compression input bytes: In:XXX
+#   %gzipout          mod_gzip compression output bytes & ratio: Out:YYY:ZZpct.
+#   %gzipratio        mod_gzip compression ratio: ZZpct.
+#   %deflateratio     mod_deflate compression ratio with format: (ZZ)
+#   %email            EMail sender (for mail log)
+#   %email_r          EMail receiver (for mail log)
+#   %virtualname      Web sever virtual hostname. Use this tag when same log
+#                     contains data of several virtual web servers. AWStats
+#                     will discard records not in SiteDomain nor HostAliases
+#   %cluster          If log file is provided from several computers (merged by
+#                     logresolvemerge.pl), use this to define cluster id field.
+#   %extraX           Another field that you plan to use for building a
+#                     personalized report with ExtraSection feature (See later).
+#   If your log format has some fields not included in this list, use:
+#   %other            Means another not used field
+#   %otherquot        Means another not used double quoted field
+#
+# Examples for Apache combined logs (following two examples are equivalent):
+# LogFormat = 1
+# LogFormat = "%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot"
+#
+# Example for IIS:
+# LogFormat = 2
+#
+LogFormat = 1
+
+
+# If your log field's separator is not a space, you can change this parameter.
+# This parameter is not used if LogFormat is a predefined value (1,2,3,4)
+# Backslash can be used as escape character.
+# Example: " "
+# Example: "\t"
+# Example: "\|"
+# Example: ","
+# Default: " "
+#
+LogSeparator=" "
+
+
+# "SiteDomain" must contain the main domain name, or the main intranet web
+# server name, used to reach the web site.
+# If you share the same log file for several virtual web servers, this
+# parameter is used to tell AWStats to filter record that contains records for
+# this virtual host name only (So check that this virtual hostname can be
+# found in your log file and use a personalized log format that include the
+# %virtualname tag).
+# But for multi hosting a better solution is to have one log file for each
+# virtual web server. In this case, this parameter is only used to generate
+# full URL's links when ShowLinksOnUrl option is set to 1.
+# If analyzing mail log, enter here the domain name of mail server.
+# Example: "myintranetserver"
+# Example: "www.domain.com"
+# Example: "ftp.domain.com"
+# Example: "domain.com"
+#
+SiteDomain="translate.fedoraproject.org"
+
+
+# Enter here all other possible domain names, addresses or virtual host
+# aliases someone can use to access your site. Try to keep only the minimum
+# number of possible names/addresses to have the best performances.
+# You can repeat the "SiteDomain" value in this list.
+# This parameter is used to analyze referer field in log file and to help
+# AWStats to know if a referer URL is a local URL of same site or an URL of
+# another site.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Note: You can also use @/mypath/myfile if list of aliases are in a file.
+# Example: "www.myserver.com localhost 127.0.0.1 REGEX[mydomain\.(net|org)$]"
+#
+HostAliases="REGEX[.*\.fedoraproject\.org]"
+
+
+# If you want to have hosts reported by name instead of ip address, AWStats
+# need to make reverse DNS lookups (if not already done in your log file).
+# With DNSLookup to 0, all hosts will be reported by their IP addresses and
+# not by the full hostname of visitors (except if names are already available
+# in log file).
+# If you want/need to set DNSLookup to 1, don't forget that this will reduce
+# dramatically AWStats update process speed. Do not use on large web sites.
+# Note: Reverse DNS lookup is done on IPv4 only (Enable ipv6 plugin for IPv6).
+# Note: Result of DNS Lookup can be used to build the Country report. However
+# it is highly recommanded to enable the plugin 'geoipfree' or 'geoip' to
+# have an accurate Country report with no need of DNS Lookup.
+# Possible values:
+# 0 - No DNS Lookup
+# 1 - DNS Lookup is fully enabled
+# 2 - DNS Lookup is made only from static DNS cache file (if it exists)
+# Default: 2
+# 
+DNSLookup=2
+
+
+# When AWStats updates its statistics, it stores results of its analysis in 
+# files (AWStats database). All those files are written in the directory
+# defined by the "DirData" parameter. Set this value to the directory where
+# you want AWStats to save its database and working files into.
+# Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser"
+# feature (see later), you need "Write" permissions by web server user on this
+# directory (and "Modify" for Windows NTFS file systems).
+# Example: "/var/lib/awstats"
+# Example: "../data"
+# Example: "C:/awstats_data_dir"
+# Default: "."          (means same directory as awstats.pl)
+#
+DirData="/var/lib/awstats"
+
+
+# Relative or absolute web URL of your awstats cgi-bin directory.
+# This parameter is used only when AWStats is run from command line
+# with -output option (to generate links in HTML reported page).
+# Example: "/awstats"
+# Default: "/cgi-bin"   (means awstats.pl is in "/yourwwwroot/cgi-bin")
+#
+DirCgi="/awstats"
+
+
+# Relative or absolute web URL of your awstats icon directory.
+# If you build static reports ("... -output > outputpath/output.html"), enter
+# path of icon directory relative to the output directory 'outputpath'.
+# Example: "/awstatsicons"
+# Example: "../icon"
+# Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon")
+#
+DirIcons="/awstatsicons"
+
+
+# When this parameter is set to 1, AWStats adds a button on report page to
+# allow to "update" statistics from a web browser. Warning, when "update" is
+# made from a browser, AWStats is run as a CGI by the web server user defined
+# in your web server (user "nobody" by default with Apache, "IUSR_XXX" with
+# IIS), so the "DirData" directory and all already existing history files
+# awstatsMMYYYY[.xxx].txt must be writable by this user. Change permissions if
+# necessary to "Read/Write" (and "Modify" for Windows NTFS file systems).
+# Warning: Update process can be long so you might experience "time out"
+# browser errors if you don't launch AWStats frequently enough.
+# When set to 0, update is only made when AWStats is run from the command
+# line interface (or a task scheduler).
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowToUpdateStatsFromBrowser=0
+
+
+# AWStats saves and sorts its database on a month basis (except if using
+# databasebreak option from command line). 
+# However, if you choose the -month=all from command line or
+# value '-Year-' from CGI combo form to have a report for all year, AWStats
+# needs to reload all data for full year (each month), and sort them,
+# requiring a large amount of time, memory and CPU. This might be a problem
+# for web hosting providers that offer AWStats for large sites, on shared
+# servers, to non CPU cautious customers.
+# For this reason, the 'full year' is only enabled on Command Line by default.
+# You can change this by setting this parameter to 0, 1, 2 or 3.
+# Possible values:
+#  0 - Never allowed
+#  1 - Allowed on CLI only, -Year- value in combo is not visible
+#  2 - Allowed on CLI only, -Year- value in combo is visible but not allowed
+#  3 - Possible on CLI and CGI
+# Default: 2
+#
+AllowFullYearView=2
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When the update process runs, AWStats can set a lock file in TEMP or TMP
+# directory. This lock is to avoid to have 2 update processes running at the
+# same time to prevent unknown conflicts problems and avoid DoS attacks when
+# AllowToUpdateStatsFromBrowser is set to 1.
+# Because, when you use lock file, you can experience sometimes problems in
+# lock file not correctly removed (killed process for example requires that
+# you remove the file manualy), this option is not enabled by default (Do
+# not enable this option with no console server access).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+EnableLockForUpdate=1
+
+
+# AWStats can do reverse DNS lookups through a static DNS cache file that was
+# previously created manually. If no path is given in static DNS cache file
+# name, AWStats will search DirData directory. This file is never changed.
+# This option is not used if DNSLookup=0.
+# Note: DNS cache file format is 'minsince1970 ipaddress resolved_hostname'
+# or just 'ipaddress resolved_hostname'
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscache"
+# Default: "dnscache.txt"
+#
+DNSStaticCacheFile="dnscache.txt"
+
+
+# AWStats can do reverse DNS lookups through a DNS cache file that was created
+# by a previous run of AWStats. This file is erased and recreated after each
+# statistics update process. You don't need to create and/or edit it.
+# AWStats will read and save this file in DirData directory.
+# This option is used only if DNSLookup=1.
+# Note: If a DNSStaticCacheFile is available, AWStats will check for DNS
+# lookup in DNSLastUpdateCacheFile after checking into DNSStaticCacheFile.
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscachelastupdate"
+# Default: "dnscachelastupdate.txt"
+#
+DNSLastUpdateCacheFile="dnscachelastupdate.txt"
+
+
+# You can specify specific IP addresses that should NOT be looked up in DNS.
+# This option is used only if DNSLookup=1.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "123.123.123.123 REGEX[^192\.168\.]"
+# Default: ""
+#
+SkipDNSLookupFor=""
+
+
+# The following two parameters allow you to protect a config file from being
+# read by AWStats when called from a browser if web user has not been
+# authenticated. Your AWStats program must be in a web protected "realm" (With
+# Apache, you can use .htaccess files to do so. With other web servers, see
+# your server setup manual).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowAccessFromWebToAuthenticatedUsersOnly=0
+
+
+# This parameter gives the list of all authorized authenticated users to view
+# statistics for this domain/config file. This parameter is used only if
+# AllowAccessFromWebToAuthenticatedUsersOnly is set to 1.
+# Change : Effective immediatly
+# Example: "user1 user2"
+# Example: "__REMOTE_USER__"
+# Default: ""
+#
+AllowAccessFromWebToFollowingAuthenticatedUsers=""
+
+
+# When this parameter is defined to something, the IP address of the user that
+# reads its statistics from a browser (when AWStats is used as a CGI) is
+# checked and must match one of the IP address values or ranges.
+# Change : Effective immediatly
+# Example: "127.0.0.1 123.123.123.1-123.123.123.255"
+# Default: ""
+#
+AllowAccessFromWebToFollowingIPAddresses=""
+
+
+# If the "DirData" directory (see above) does not exist, AWStats return an
+# error. However, you can ask AWStats to create it.
+# This option can be used by some Web Hosting Providers that has defined a 
+# dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and
+# don't want to have to create a new directory each time they add a new user.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+CreateDirDataIfNotExists=0
+
+
+# You can choose in which format the Awstats history database is saved.
+# Note: Using "xml" format make AWStats building database files three times
+# larger than using "text" format.
+# Change : Database format is switched after next update
+# Possible values: text or xml
+# Default: text
+#
+BuildHistoryFormat=text
+
+
+# If you prefer having the report output pages be built as XML compliant pages
+# instead of simple HTML pages, you can set this to 'xhtml' (May not work
+# properly with old browsers).
+# Change : Effective immediatly
+# Possible values: html or xhtml
+# Default: html
+#
+BuildReportFormat=html
+
+
+# AWStats databases can be updated from command line of from a browser (when
+# used as a cgi program). So AWStats database files need write permission
+# for both command line user and default web server user (nobody for Unix,
+# IUSR_xxx for IIS/Windows,...).
+# To avoid permission problems between update process (run by an admin user)
+# and CGI process (ran by a low level user), AWStats can save its database 
+# files with read and write permissions for everyone.
+# By default, AWStats keeps default user permissions on updated files. If you 
+# set AllowToUpdateStatsFromBrowser to 1, you can change this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+SaveDatabaseFilesWithPermissionsForEveryone=0
+
+
+# AWStats can purge log file, after analyzing it. Note that AWStats is able
+# to detect new lines in a log file, to process only them, so you can launch
+# AWStats as often as you want, even with this parameter to 0.
+# With 0, no purge is made, so you must use a scheduled task or a web server
+# that make this purge frequently.
+# With 1, the purge of the log file is made each time AWStats update is run.
+# This parameter doesn't work with IIS (This web server doesn't let its log
+# file to be purged).
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+PurgeLogFile=0
+
+
+# When PurgeLogFile is setup to 1, AWStats will clean your log file after
+# processing it. You can however keep an archive file of all processed log
+# records by setting this parameter (For example if you want to use another
+# log analyzer). The archived log file is saved in "DirData" with name
+# awstats_archive.configname[.suffix].log
+# This parameter is not used if PurgeLogFile=0
+# Change : Effective for new updates only
+# Possible values: 0, 1, or tags (See LogFile parameter) for suffix
+# Example: 1
+# Example: %YYYY%MM%DD
+# Default: 0
+#
+ArchiveLogRecords=0
+
+
+# Each time you run the update process, AWStats overwrites the 'historic file'
+# for the month (awstatsMMYYYY[.*].txt) with the updated one.
+# When write errors occurs (IO, disk full,...), this historic file can be
+# corrupted and must be deleted. Because this file contains information of all
+# past processed log files, you will loose old stats if removed. So you can
+# ask AWStats to save last non corrupted file in a .bak file. This file is
+# stored in "DirData" directory with other 'historic files'.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+KeepBackupOfHistoricFiles=0
+
+
+# Default index page name for your web server.
+# Change : Effective for new updates only
+# Example: "index.php index.html default.html"
+# Default: "index.html"
+#
+DefaultFile="index.html"
+
+
+# Do not include access from clients that match following criteria.
+# If your log file contains IP addresses in host field, you must enter here
+# matching IP addresses criteria.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "SkipHosts" is "OnlyHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Example: "localhost REGEX[^.*\.localdomain$]"
+# Default: ""
+#
+SkipHosts="127.0.0.1"
+
+
+# Do not include access from clients with a user agent that match following
+# criteria. If you want to exclude a robot, you should update the robots.pm
+# file instead of this parameter.
+# The opposite parameter of "SkipUserAgents" is "OnlyUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "konqueror REGEX[ua_test_v\d\.\d]"
+# Default: ""
+#
+SkipUserAgents=""
+
+
+# Use SkipFiles to ignore access to URLs that match one of following entries.
+# You can enter a list of not important URLs (like framed menus, hidden pages,
+# etc...) to exclude them from statistics. You must enter here exact relative
+# URL as found in log file, or a matching REGEX value. Check apply on URL with
+# all its query paramaters.
+# For example, to ignore /badpage.php, just add "/badpage.php". To ignore all
+# pages in a particular directory, add "REGEX[^\/directorytoexclude]".
+# The opposite parameter of "SkipFiles" is "OnlyFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "/badpage.php /page.php?param=x REGEX[^\/excludedirectory]"
+# Default: ""
+#
+SkipFiles=""
+
+
+# Use SkipReferrersBlackList if you want to exclude records coming from a SPAM
+# referrer. Parameter must receive a local file name containing rules applied
+# on referrer field. If parameter is empty, no filter is applied.
+# An example of such a file is available in lib/blacklist.txt
+# You can download updated version at http://www.jayallen.org/comment_spam/
+# Change : Effective for new updates only
+# Example: "/mylibpath/blacklist.txt"
+# Default: ""
+#
+# WARNING!! Using this feature make AWStats running very slower (5 times slower
+# with black list file provided with AWStats !
+#
+SkipReferrersBlackList=""
+
+
+# Include in stats, only accesses from hosts that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular hosts, you can add those host names in
+# this parameter.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "OnlyHosts" is "SkipHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Default: ""
+#
+OnlyHosts=""
+
+
+# Include in stats, only accesses from user agent that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular browsers, you can add their user agents
+# string in this parameter.
+# The opposite parameter of "OnlyUserAgents" is "SkipUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "msie"
+# Default: ""
+#
+OnlyUserAgents=""
+
+
+# Include in stats, only accesses to URLs that match one of following entries.
+# For example, if you want AWStats to filter access to keep only stats that
+# match a particular string, like a particular directory, you can add this
+# directory name in this parameter.
+# The opposite parameter of "OnlyFiles" is "SkipFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "REGEX[marketing_directory] REGEX[office\/.*\.(csv|sxw)$]"
+# Default: ""
+#
+OnlyFiles=""
+
+
+# Add here a list of kind of url (file extension) that must be counted as
+# "Hit only" and not as a "Hit" and "Page/Download". You can set here all
+# image extensions as they are hit downloaded that must be counted but they
+# are not viewed pages. URLs with such extensions are not included in the TOP
+# Pages/URL report.
+# Note: If you want to exclude particular URLs from stats (No Pages and no
+# Hits reported), you must use SkipFiles parameter.
+# Change : Effective for new updates only
+# Example: "css js class gif jpg jpeg png bmp ico zip arj gz z wav mp3 wma mpg"
+# Example: ""
+# Default: "css js class gif jpg jpeg png bmp ico"
+#
+NotPageList="css js class gif jpg jpeg png bmp ico swf"
+
+
+# By default, AWStats considers that records found in web log file are
+# successful hits if HTTP code returned by server is a valid HTTP code (200
+# and 304). Any other code are reported in HTTP status chart.
+# Note that HTTP 'control codes', like redirection (302, 305) are not added by
+# default in this list as they are not pages seen by a visitor but are
+# protocol exchange codes to tell the browser to ask another page. Because
+# this other page will be counted and seen with a 200 or 304 code, if you 
+# add such codes, you will have 2 pages viewed reported for only one in facts.
+# Change : Effective for new updates only
+# Example: "200 304 302 305"
+# Default: "200 304"
+#
+ValidHTTPCodes="200 304"
+
+
+# By default, AWStats considers that records found in mail log file are
+# successful mail transfers if field that represent return code in analyzed
+# log file match values defined by this parameter.
+# Change : Effective for new updates only
+# Example: "1 250 200"
+# Default: "1 250"
+#
+ValidSMTPCodes="1 250"
+
+
+# Some web servers on some Operating systems (IIS-Windows) consider that a
+# login with same value but different case are the same login. To tell AWStats
+# to also consider them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+AuthenticatedUsersNotCaseSensitive=0
+
+
+# Some web servers on some Operating systems (IIS-Windows) considers that two
+# URLs with same value but different case are the same URL. To tell AWStats to
+# also considers them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+URLNotCaseSensitive=0
+
+
+# Keep or remove the anchor string you can find in some URLs.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+URLWithAnchor=0
+
+
+# In URL links, "?" char is used to add parameter's list in URLs. Syntax is:
+# /mypage.html?param1=value1&param2=value2
+# However, some servers/sites use also other chars to isolate dynamic part of
+# their URLs. You can complete this list with all such characters.
+# Change : Effective for new updates only
+# Example: "?;,"
+# Default: "?;"
+#
+URLQuerySeparators="?;"
+
+
+# Keep or remove the query string to the URL in the statistics for individual
+# pages. This is primarily used to differentiate between the URLs of dynamic
+# pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as two
+# different pages.
+# Warning, when set to 1, memory required to run AWStats is dramatically
+# increased if you have a lot of changing URLs (for example URLs with a random
+# id inside). Such web sites should not set this option to 1 or use seriously
+# the next parameter URLWithQueryWithOnlyFollowingParameters (or eventually 
+# URLWithQueryWithoutFollowingParameters).
+# Change : Effective for new updates only
+# Possible values:
+# 0 - URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used     (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLWithQuery=0
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to keep only parameters
+# you need (if you know them) before counting, manipulating and storing URL.
+# Enter here list of wanted parameters. For example, with "param", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithoutFollowingParameters.
+# Change : Effective for new updates only
+# Example: "param"
+# Default: ""
+# 
+URLWithQueryWithOnlyFollowingParameters=""
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to remove such parameters
+# from the URL before counting, manipulating and storing URL. Enter here list
+# of all non wanted parameters. For example if you enter "id", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithOnlyFollowingParameters.
+# Change : Effective for new updates only
+# Example: "PHPSESSID jsessionid"
+# Default: ""
+# 
+URLWithQueryWithoutFollowingParameters=""
+
+
+# Keep or remove the query string to the referrer URL in the statistics for
+# external referrer pages. This is used to differentiate between the URLs of
+# dynamic referrer pages. If set to 1, mypage.html?id=x and mypage.html?id=y
+# are counted as two different referrer pages.
+# Change : Effective for new updates only
+# Possible values:
+# 0 - Referrer URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used      (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLReferrerWithQuery=0
+
+
+# AWStats can detect setup problems or show you important informations to have
+# a better use. Keep this to 1, except if AWStats says you can change it.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 1
+#
+WarningMessages=1
+
+
+# When an error occurs, AWStats outputs a message related to errors. If you
+# want (in most cases for security reasons) to have no error messages, you
+# can set this parameter to your personalized generic message.
+# Change : Effective immediatly
+# Example: "An error occurred. Contact your Administrator"
+# Default: ""
+#
+ErrorMessages=""
+
+
+# AWStat can be run with debug=x parameter to output various informations
+# to help in debugging or solving troubles. If you want to allow this (not
+# enabled by default for security reasons), set this parameter to 0.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+DebugMessages=0
+
+
+# To help you to detect if your log format is good, AWStats reports an error
+# if all the first NbOfLinesForCorruptedLog lines have a format that does not
+# match the LogFormat parameter.
+# However, some worm virus attack on your web server can result in a very high
+# number of corrupted lines in your log. So if you experience awstats stop
+# because of bad virus records at the beginning of your log file, you can
+# increase this parameter (very rare).
+# Change : Effective for new updates only
+# Default: 50
+#
+NbOfLinesForCorruptedLog=50
+
+
+# For some particular integration needs, you may want to have CGI links to
+# point to another script than awstats.pl.
+# Use the name of this script in WrapperScript parameter.
+# Change : Effective immediatly
+# Example: "awstatslauncher.pl"
+# Default: ""
+#
+WrapperScript=""
+
+
+# DecodeUA must be set to 1 if you use Roxen web server. This server converts
+# all spaces in user agent field into %20. This make the AWStats robots, OS
+# and browsers detection fail in some cases. Just change it to 1 if and only
+# if your web server is Roxen.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+DecodeUA=0
+
+
+# MiscTrackerUrl can be used to make AWStats able to detect some miscellaneous
+# things, that can not be tracked on other way, like:
+# - Javascript disabled
+# - Java enabled
+# - Screen size
+# - Color depth
+# - Macromedia Director plugin
+# - Macromedia Shockwave plugin
+# - Realplayer G2 plugin
+# - QuickTime plugin
+# - Mediaplayer plugin
+# - Acrobat PDF plugin
+# To enable all these features, you must copy the awstats_misc_tracker.js file
+# into a /js/ directory stored in your web document root and add the following
+# HTML code at the end of your index page (but before </BODY>) :
+#
+# <script language=javascript src="/js/awstats_misc_tracker.js"></script>
+# <noscript><img src="/js/awstats_misc_tracker.js?nojs=y" height=0 width=0 border=0 style="display: none"></noscript>
+#
+# If code is not added in index page, all those detection capabilities will be
+# disabled. You must also check that ShowScreenSizeStats and ShowMiscStats
+# parameters are set to 1 to make results appear in AWStats report page.
+# If you want to use another directory than /js/, you must also change the
+# awstatsmisctrackerurl variable into the awstats_misc_tracker.js file.
+# Change : Effective for new updates only.
+# Possible value: URL of javascript tracker file added in your HTML code.
+# Default: "/js/awstats_misc_tracker.js"
+#
+MiscTrackerUrl="/js/awstats_misc_tracker.js"
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# The following values allow you to define accuracy of AWStats entities
+# (robots, browsers, os, referers, file types) detection.
+# It might be a good idea for large web sites or ISP that provides AWStats to
+# high number of customers, to set this parameter to 1 (or 0), instead of 2.
+# Possible values:
+#    0      = No detection,
+#    1      = Medium/Standard detection
+#    2      = Full detection
+# Change : Effective for new updates only
+# Note   : LevelForBrowsersDetection can also accept value "allphones". This
+#          enable detailed detection of phone/pda browsers.
+# Default: 2 (0 for LevelForWormsDetection)
+#
+LevelForBrowsersDetection=2         # 0 disables Browsers detection.
+                                    # 2 reduces AWStats speed by 2%
+                                    # allphones reduces AWStats speed by 5%
+LevelForOSDetection=2               # 0 disables OS detection.
+                                    # 2 reduces AWStats speed by 3%
+LevelForRefererAnalyze=2            # 0 disables Origin detection.
+                                    # 2 reduces AWStats speed by 14%
+LevelForRobotsDetection=2           # 0 disables Robots detection.
+                                    # 2 reduces AWStats speed by 2.5%
+LevelForSearchEnginesDetection=2    # 0 disables Search engines detection.
+                                    # 2 reduces AWStats speed by 9%
+LevelForKeywordsDetection=2         # 0 disables Keyphrases/Keywords detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForFileTypesDetection=2        # 0 disables File types detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForWormsDetection=0            # 0 disables Worms detection.
+                                    # 2 reduces AWStats speed by 15%
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When you use AWStats as a CGI, you can have the reports shown in HTML frames.
+# Frames are only available for report viewed dynamically. When you build
+# pages from command line, this option is not used and no frames are built.
+# Possible values: 0 or 1
+# Default: 1
+#
+UseFramesWhenCGI=1
+
+
+# This parameter asks your browser to open detailed reports into a different
+# window than the main page.
+# Possible values:
+# 0 - Open all in same browser window
+# 1 - Open detailed reports in another window except if using frames
+# 2 - Open always in a different window even if reports are framed
+# Default: 1
+#
+DetailedReportsOnNewWindows=1
+
+
+# You can add, in the HTML report page, a cache lifetime (in seconds) that
+# will be returned to the browser in HTTP header answer by server.
+# This parameter is not used when reports are built with -staticlinks option.
+# Example: 3600
+# Default: 0
+#
+Expires=3600
+
+
+# To avoid too large web pages, you can ask AWStats to limit number of rows of
+# all reported charts to this number when no other limits apply.
+# Default: 1000
+#
+MaxRowsInHTMLOutput=1000
+
+
+# Set your primary language (ISO-639-1 language codes).
+# Possible values:
+#  Albanian=al, Bosnian=ba, Bulgarian=bg, Catalan=ca,
+#  Chinese (Taiwan)=tw, Chinese (Simpliefied)=cn, Croatian=hr, Czech=cz,
+#  Danish=dk, Dutch=nl, English=en, Estonian=et, Euskara=eu, Finnish=fi,
+#  French=fr, Galician=gl, German=de, Greek=gr, Hebrew=he, Hungarian=hu,
+#  Icelandic=is, Indonesian=id, Italian=it, Japanese=jp, Korean=ko,
+#  Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl,
+#  Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru,
+#  Serbian=sr, Slovak=sk, Slovenian=si, Spanish=es, Swedish=se, Turkish=tr,
+#  Ukrainian=ua, Welsh=cy.
+#  First available language accepted by browser=auto
+# Default: "auto"
+#
+Lang="auto"
+
+
+# Set the location of language files.
+# Example: "/usr/share/awstats/lang"
+# Default: "./lang" (means lang directory is in same location than awstats.pl)
+#
+DirLang="./lang"
+
+
+# Show menu header with reports' links
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowMenu=1					
+
+
+# You choose here which reports you want to see in the main page and what you
+# want to see in those reports.
+# Possible values:
+#  0  - Report is not shown at all
+#  1  - Report is shown in main page with an entry in menu and default columns
+# XYZ - Report shows column informations defined by code X,Y,Z...
+#       X,Y,Z... are code letters among the following:
+#        U = Unique visitors
+#        V = Visits
+#        P = Number of pages
+#        H = Number of hits (or mails)
+#        B = Bandwith (or total mail size for mail logs)
+#        L = Last access date
+#        E = Entry pages
+#        X = Exit pages
+#        C = Web compression (mod_gzip,mod_deflate)
+#        M = Average mail size (mail logs)
+#
+
+# Show monthly summary
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowSummary=UVPHB
+
+# Show monthly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowMonthStats=UVPHB
+
+# Show days of month chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: VPHB, Possible column codes: VPHB
+ShowDaysOfMonthStats=VPHB
+
+# Show days of week chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDaysOfWeekStats=PHB
+
+# Show hourly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowHoursStats=PHB
+
+# Show domains/country chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDomainsStats=PHB
+
+# Show hosts chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHBL, Possible column codes: PHBL
+ShowHostsStats=PHBL
+
+# Show authenticated users chart
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHBL
+ShowAuthenticatedUsers=0
+
+# Show robots chart
+# Context: Web, Streaming
+# Default: HBL, Possible column codes: HBL
+ShowRobotsStats=HBL
+
+# Show worms chart
+# Context: Web, Streaming
+# Default: 0 (If set to other than 0, see also LevelForWormsDetection), Possible column codes: HBL
+ShowWormsStats=0
+
+# Show email senders chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailSenders=0
+
+# Show email receivers chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailReceivers=0
+
+# Show session chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowSessionsStats=1
+
+# Show pages-url chart.
+# Context: Web, Streaming, Ftp
+# Default: PBEX, Possible column codes: PBEX
+ShowPagesStats=PBEX
+
+# Show file types chart.
+# Context: Web, Streaming, Ftp
+# Default: HB, Possible column codes: HBC
+ShowFileTypesStats=HB
+
+# Show file size chart (Not yet available)
+# Context: Web, Streaming, Mail, Ftp
+# Default: 1, Possible column codes: None
+ShowFileSizesStats=0		
+
+# Show operating systems chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowOSStats=1
+
+# Show browsers chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowBrowsersStats=1
+
+# Show screen size chart
+# Context: Web, Streaming
+# Default: 0 (If set to 1, see also MiscTrackerUrl), Possible column codes: None
+ShowScreenSizeStats=0
+
+# Show origin chart
+# Context: Web, Streaming
+# Default: PH, Possible column codes: PH
+ShowOriginStats=PH
+
+# Show keyphrases chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeyphrasesStats=1
+
+# Show keywords chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeywordsStats=1
+
+# Show misc chart
+# Context: Web, Streaming
+# Default: a (See also MiscTrackerUrl parameter), Possible column codes: anjdfrqwp
+ShowMiscStats=a
+
+# Show http errors chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowHTTPErrorsStats=1
+
+# Show smtp errors chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: None
+ShowSMTPErrorsStats=0
+
+# Show the cluster report (Your LogFormat must contains the %cluster tag)
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHB
+ShowClusterStats=0
+
+
+# Some graphical reports are followed by the data array of values.
+# If you don't want this array (to reduce the report size for example), you
+# can set thoose options to 0.
+# Possible values: 0 or 1
+# Default: 1
+#
+# Data array values for the ShowMonthStats report
+AddDataArrayMonthStats=1
+# Data array values for the ShowDaysOfMonthStats report
+AddDataArrayShowDaysOfMonthStats=1
+# Data array values for the ShowDaysOfWeekStats report
+AddDataArrayShowDaysOfWeekStats=1
+# Data array values for the ShowHoursStats report
+AddDataArrayShowHoursStats=1
+
+
+# In the Origin chart, you have stats on where your hits came from. You can
+# include hits on pages that come from pages of same sites in this chart.
+# Possible values: 0 or 1
+# Default: 0
+#
+IncludeInternalLinksInOriginSection=0
+
+
+# The following parameters can be used to choose the maximum number of lines
+# shown for the particular following reports.
+#
+# Stats by countries/domains
+MaxNbOfDomain = 10
+MinHitDomain  = 1
+# Stats by hosts
+MaxNbOfHostsShown = 10
+MinHitHost    = 1
+# Stats by authenticated users
+MaxNbOfLoginShown = 10
+MinHitLogin   = 1
+# Stats by robots
+MaxNbOfRobotShown = 10
+MinHitRobot   = 1
+# Stats by pages
+MaxNbOfPageShown = 10
+MinHitFile    = 1
+# Stats by OS
+MaxNbOfOsShown = 10
+MinHitOs      = 1
+# Stats by browsers
+MaxNbOfBrowsersShown = 10
+MinHitBrowser = 1
+# Stats by screen size
+MaxNbOfScreenSizesShown = 5
+MinHitScreenSize = 1
+# Stats by window size (following 2 parameters are not yet used)
+MaxNbOfWindowSizesShown = 5
+MinHitWindowSize = 1
+# Stats by referers
+MaxNbOfRefererShown = 10
+MinHitRefer   = 1
+# Stats for keyphrases
+MaxNbOfKeyphrasesShown = 10
+MinHitKeyphrase = 1
+# Stats for keywords
+MaxNbOfKeywordsShown = 10
+MinHitKeyword = 1
+# Stats for sender or receiver emails
+MaxNbOfEMailsShown = 20
+MinHitEMail   = 1
+
+
+# Choose if you want the week report to start on sunday or monday
+# Possible values:
+# 0 - Week starts on sunday
+# 1 - Week starts on monday
+# Default: 1
+#
+FirstDayOfWeek=1
+
+
+# List of visible flags that link to other language translations.
+# See Lang parameter for list of allowed flag/language codes.
+# If you don't want any flag link, set ShowFlagLinks to "".
+# This parameter is used only if ShowMenu parameter is set to 1.
+# Possible values: "" or "language_codes_separated_by_space"
+# Example: "en es fr nl de"
+# Default: ""
+#
+ShowFlagLinks=""
+
+
+# Each URL, shown in stats report views, are links you can click.
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowLinksOnUrl=1
+
+
+# When AWStats builds HTML links in its report pages, it starts those links
+# with "http://". However some links might be HTTPS links, so you can enter
+# here the root of all your HTTPS links. If all your site is a SSL web site,
+# just enter "/".
+# This parameter is not used if ShowLinksOnUrl is 0.
+# Example: "/shopping"
+# Example: "/"
+# Default: ""
+#
+UseHTTPSLinkForUrl=""
+
+
+# Maximum length of URL part shown on stats page (number of characters).
+# This affects only URL visible text, links still work.
+# Default: 64
+#
+MaxLengthOfShownURL=64
+
+
+# You can enter HTML code that will be added at the top of AWStats reports.
+# Default: ""
+#
+HTMLHeadSection=""
+
+
+# You can enter HTML code that will be added at the end of AWStats reports.
+# Great to add advert ban.
+# Default: ""
+#
+HTMLEndSection=""
+
+
+# You can set Logo and LogoLink to use your own logo.
+# Logo must be the name of image file (must be in $DirIcons/other directory).
+# LogoLink is the expected URL when clicking on Logo.
+# Default: "awstats_logo6.png"
+#
+Logo="awstats_logo6.png"
+LogoLink="http://awstats.sourceforge.net"
+
+
+# Value of maximum bar width/height for horizontal/vertical HTML graphics bars.
+# Default: 260/90
+#
+BarWidth   = 260
+BarHeight  = 90
+
+
+# You can ask AWStats to use a particular CSS (Cascading Style Sheet) to
+# change its look. To create a style sheet, you can use samples provided with
+# AWStats in wwwroot/css directory.
+# Example: "/awstatscss/awstats_bw.css"
+# Example: "/css/awstats_bw.css"
+# Default: ""
+#
+StyleSheet=""
+
+
+# Those color parameters can be used (if StyleSheet parameter is not used)
+# to change AWStats look.
+# Example: color_name="RRGGBB"	# RRGGBB is Red Green Blue components in Hex
+#
+color_Background="FFFFFF"		# Background color for main page (Default = "FFFFFF")
+color_TableBGTitle="CCCCDD"		# Background color for table title (Default = "CCCCDD")
+color_TableTitle="000000"		# Table title font color (Default = "000000")
+color_TableBG="CCCCDD"			# Background color for table (Default = "CCCCDD")
+color_TableRowTitle="FFFFFF"	# Table row title font color (Default = "FFFFFF")
+color_TableBGRowTitle="ECECEC"	# Background color for row title (Default = "ECECEC")
+color_TableBorder="ECECEC"		# Table border color (Default = "ECECEC")
+color_text="000000"				# Color of text (Default = "000000")
+color_textpercent="606060"		# Color of text for percent values (Default = "606060")
+color_titletext="000000"		# Color of text title within colored Title Rows (Default = "000000")
+color_weekend="EAEAEA"			# Color for week-end days (Default = "EAEAEA")
+color_link="0011BB"				# Color of HTML links (Default = "0011BB")
+color_hover="605040"			# Color of HTML on-mouseover links (Default = "605040") 
+color_u="FFAA66"				# Background color for number of unique visitors (Default = "FFAA66")
+color_v="F4F090"				# Background color for number of visites (Default = "F4F090")
+color_p="4477DD"				# Background color for number of pages (Default = "4477DD")
+color_h="66DDEE"				# Background color for number of hits (Default = "66DDEE")
+color_k="2EA495"				# Background color for number of bytes (Default = "2EA495")
+color_s="8888DD"				# Background color for number of search (Default = "8888DD")
+color_e="CEC2E8"				# Background color for number of entry pages (Default = "CEC2E8")
+color_x="C1B2E2"				# Background color for number of exit pages (Default = "C1B2E2")
+
+
+
+#-----------------------------------------------------------------------------
+# PLUGINS
+#-----------------------------------------------------------------------------
+
+# Add here all plugin files you want to load.
+# Plugin files must be .pm files stored in 'plugins' directory.
+# Uncomment LoadPlugin lines to enable a plugin after checking that perl
+# modules required by the plugin are installed.
+
+# Plugin: Tooltips
+# Perl modules required: None
+# Add some tooltips help on HTML report pages.
+# Note that enabling this kind of help will increased HTML report pages size,
+# so server load and bandwidth.
+#
+LoadPlugin="tooltips"
+
+# Plugin: DecodeUTFKeys
+# Perl modules required: Encode and URI::Escape
+# Allow AWStats to show correctly (in language charset) keywords/keyphrases
+# strings even if they were UTF8 coded by the referer search engine.
+#
+#LoadPlugin="decodeutfkeys"
+
+# Plugin: IPv6
+# Perl modules required: Net::IP and Net::DNS
+# This plugin gives AWStats capability to make reverse DNS lookup on IPv6
+# addresses.
+# Note: If you are interested in having country report, you should use the
+# geoipfree or geoip plugin instead of enabled reverse DNS lookup.
+#
+#LoadPlugin="ipv6"
+
+# Plugin: HashFiles
+# Perl modules required: Storable
+# AWStats DNS cache files are read/saved as native hash files. This increases
+# DNS cache files loading speed, above all for very large web sites.
+#
+LoadPlugin="hashfiles"
+
+# Plugin: GeoIP
+# Perl modules required: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IP module 
+# from Maxmind, database more up to date) or the GeoIPfree plugin (need
+# Perl Geo::IPfree module, database less up to date).
+# This plugin reduces AWStats speed of 8% !
+#
+LoadPlugin="geoip GEOIP_STANDARD /usr/share/GeoIP/GeoIP.dat"
+
+# Plugin: GeoIPfree
+# Perl modules required: Geo::IPfree version 0.2+ (from Graciliano M.P.)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IPfree
+# module, database less up to date) or the GeoIP plugin (need Perl Geo::IP
+# module from Maxmind, database more up to date).
+# Note: Activestate provide a corrupted version of Geo::IPfree 0.2 Perl
+# module, so install it from elsewhere (from www.cpan.org for example).
+# This plugin reduces AWStats speed of 10% !
+#
+#LoadPlugin="geoipfree"
+
+# Plugin: GeoIP_Region_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by regions. Only regions for US and 
+# Canada can be detected.
+# Note: This plugin need Maxmind GeoIP Perl module AND the region database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Region database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_region_maxmind GEOIP_STANDARD /pathto/GeoIPRegion.dat"
+
+# Plugin: GeoIP_City_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by cities (with country and regions
+# informations for major countries).
+# Note: This plugin need Maxmind GeoIP Perl module AND the city database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the City database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /pathto/GeoIPCity.dat"
+
+# Plugin: GeoIP_ISP_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by ISP.
+# Note: This plugin need Maxmind GeoIP Perl module AND the ISP database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the ISP database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_isp_maxmind GEOIP_STANDARD /pathto/GeoIPISP.dat"
+
+# Plugin: GeoIP_Org_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by Organization name
+# Note: This plugin need Maxmind GeoIP Perl module AND the Org database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Org database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_org_maxmind GEOIP_STANDARD /pathto/GeoIPOrg.dat"
+
+# Plugin: UserInfo
+# Perl modules required: None
+# Add a text (Firtname, Lastname, Office Department, ...) in authenticated user
+# reports for each login value.
+# A text file called userinfo.myconfig.txt, with two fields (first is login,
+# second is text to show, separated by a tab char) must be created in DirData
+# directory.
+#
+#LoadPlugin="userinfo"
+
+# Plugin: HostInfo
+# Perl modules required: Net::XWhois
+# Add a column into host chart with a link to open a popup window that shows
+# info on host (like whois records).
+#
+#LoadPlugin="hostinfo"
+
+# Plugin: ClusterInfo
+# Perl modules required: None
+# Add a text (for example a full hostname) in cluster reports for each cluster
+# number.
+# A text file called clusterinfo.myconfig.txt, with two fields (first is
+# cluster number, second is text to show) separated by a tab char. must be
+# created into DirData directory.
+# Note this plugin is useless if ShowClusterStats is set to 0 or if you don't
+# use a personalized log format that contains %cluster tag.
+#
+#LoadPlugin="clusterinfo"
+
+# Plugin: UrlAliases
+# Perl modules required: None
+# Add a text (Page title, description...) in URL reports before URL value.
+# A text file called urlalias.myconfig.txt, with two fields (first is URL,
+# second is text to show, separated by a tab char) must be created into
+# DirData directory.
+#
+#LoadPlugin="urlalias"
+
+# Plugin: TimeHiRes
+# Perl modules required: Time::HiRes (if Perl < 5.8)
+# Time reported by -showsteps option is in millisecond. For debug purpose.
+#
+#LoadPlugin="timehires"		
+
+# Plugin: TimeZone
+# Perl modules required: Time::Local
+# Allow AWStats to correct a bad timezone for user of some IIS that use
+# GMT date in its log instead of local server time.
+# This module is useless for Apache and most IIS version.
+# This plugin reduces AWStats speed of 40% !!!!!!!
+#
+#LoadPlugin="timezone +2"
+
+# Plugin: Rawlog
+# Perl modules required: None
+# This plugin adds a form in AWStats main page to allow users to see raw
+# content of current log files. A filter is also available.
+#
+#LoadPlugin="rawlog"
+
+# Plugin: GraphApplet
+# Perl modules required: None
+# Supported charts are built by a 3D graphic applet.
+#
+#LoadPlugin="graphapplet /awstatsclasses"				# EXPERIMENTAL FEATURE
+
+
+
+#-----------------------------------------------------------------------------
+# EXTRA SECTIONS
+#-----------------------------------------------------------------------------
+
+# You can define your own charts, you choose here what are rows and columns
+# keys. This feature is particularly useful for marketing purpose, tracking
+# products orders for example.
+# For this, edit all parameters of Extra section. Each set of parameter is a
+# different chart. For several charts, duplicate section changing the number.
+# Note: Each Extra section reduces AWStats speed by 8%.
+#
+# WARNING: A wrong setup of Extra section might result in too large arrays
+# that will consume all your memory, making AWStats unusable after several
+# updates, so be sure to setup it correctly.
+# In most cases, you don't need this feature.
+#
+# ExtraSectionNameX is title of your personalized chart.
+# ExtraSectionCodeFilterX is list of codes the record code field must match.
+#   Put an empty string for no test on code.
+# ExtraSectionConditionX are conditions you can use to count or not the hit,
+#   Use one of the field condition
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,extraX)
+#   and a regex to match, after a coma. Use "||" for "OR".
+# ExtraSectionFirstColumnTitleX is the first column title of the chart.
+# ExtraSectionFirstColumnValuesX is a string to tell AWStats which field to
+#   extract value from
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,VHOST,extraX)
+#   and how to extract the value (using regex syntax). Each different value
+#   found will appear in first column of report on a different row. Be sure
+#   that list of different possible values will not grow indefinitely.
+# ExtraSectionFirstColumnFormatX is the string used to write value.
+# ExtraSectionStatTypesX are things you want to count. You can use standard
+#   code letters (P for pages,H for hits,B for bandwidth,L for last access).
+# ExtraSectionAddAverageRowX add a row at bottom of chart with average values.
+# ExtraSectionAddSumRowX add a row at bottom of chart with sum values.
+# MaxNbOfExtraX is maximum number of rows shown in chart.
+# MinHitExtraX is minimum number of hits required to be shown in chart.
+#
+
+# Example to report the 20 products the most ordered by "order.cgi" script
+#ExtraSectionName1="Product orders"
+#ExtraSectionCodeFilter1="200 304"
+#ExtraSectionCondition1="URL,\/cgi\-bin\/order\.cgi||URL,\/cgi\-bin\/order2\.cgi"
+#ExtraSectionFirstColumnTitle1="Product ID"
+#ExtraSectionFirstColumnValues1="QUERY_STRING,productid=([^&]+)"
+#ExtraSectionFirstColumnFormat1="%s"
+#ExtraSectionStatTypes1=PL
+#ExtraSectionAddAverageRow1=0
+#ExtraSectionAddSumRow1=1
+#MaxNbOfExtra1=20
+#MinHitExtra1=1
+
+
+# There is also a global parameter ExtraTrackedRowsLimit that limits the
+# number of possible rows an ExtraSection can report. This parameter is
+# here to protect too much memory use when you make a bad setup in your
+# ExtraSection. It applies to all ExtraSection independently meaning that
+# none ExtraSection can report more rows than value defined by ExtraTrackedRowsLimit.
+# If you know an ExtraSection will report more rows than its value, you should
+# increase this parameter or AWStats will stop with an error.
+# Example: 2000
+# Default: 500
+#
+ExtraTrackedRowsLimit=500
+
+
+#-----------------------------------------------------------------------------
+# INCLUDES
+#-----------------------------------------------------------------------------
+
+# You can include other config files using the directive with the name of the
+# config file.
+# This is particularly useful for users who have a lot of virtual servers, so
+# a lot of config files and want to maintain common values in only one file.
+# Note that when a variable is defined both in a config file and in an
+# included file, AWStats will use the last value read for parameters that
+# contains one value and AWStats will concat all values from both files for
+# parameters that are lists of values.
+#
+
+#Include ""
+
diff --git a/modules/awstats/manifests/init.pp b/modules/awstats/manifests/init.pp
index 948cb87..02696b9 100644
--- a/modules/awstats/manifests/init.pp
+++ b/modules/awstats/manifests/init.pp
@@ -24,5 +24,17 @@ class awstats::base {
         source => 'puppet:///awstats/awstats.fedoraproject.org.conf',
     }
 
+    file { '/etc/awstats/awstats.docs.fedoraproject.org.conf':
+        source => 'puppet:///awstats/awstats.docs.fedoraproject.org.conf',
+    }
+
+    file { '/etc/awstats/awstats.mirrors.fedoraproject.org.conf':
+        source => 'puppet:///awstats/awstats.mirrors.fedoraproject.org.conf',
+    }
+
+    file { '/etc/awstats/awstats.translate.fedoraproject.org.conf':
+        source => 'puppet:///awstats/awstats.translate.fedoraproject.org.conf',
+    }
+
 }

commit ebdcd79f90c078abbe4ab055b1ae9598f8d3541b
Author: Ricky Zhou <[email-masked]>
Date:   Fri Jul 18 08:34:02 2008 +0000

    Fix other typo.

diff --git a/modules/apache/manifests/init.pp b/modules/apache/manifests/init.pp
index 6376aa4..aa6410e 100644
--- a/modules/apache/manifests/init.pp
+++ b/modules/apache/manifests/init.pp
@@ -1,7 +1,5 @@
 class apache::base {
-  package { httpd: ensure => present }
-  service { httpd: ensure => running, enable => true }
-
-  }
+    package { httpd: ensure => present }
+    service { httpd: ensure => running, enable => true }
 }

commit 3ed213a7e5f73e415ad32201a393316d44f94f63
Author: Ricky Zhou <[email-masked]>
Date:   Fri Jul 18 08:31:51 2008 +0000

    Fix typo.

diff --git a/modules/awstats/manifests/init.pp b/modules/awstats/manifests/init.pp
index afd432a..948cb87 100644
--- a/modules/awstats/manifests/init.pp
+++ b/modules/awstats/manifests/init.pp
@@ -5,7 +5,7 @@ class awstats::base {
     package { GeoIP: ensure => present }
     package { perl-Geo-IP: ensure => present }
 
-    folder { '/var/www/html/awstats',
+    folder { '/var/www/html/awstats':
         source => 'blank/',
         owner => 'root',
         group => 'root',

commit bdb88c882c569ac62e5b3d63b9eba1e27ee44ae6
Author: Ricky Zhou <[email-masked]>
Date:   Fri Jul 18 08:31:06 2008 +0000

    Include the model one too.

diff --git a/modules/awstats/files/awstats.cron b/modules/awstats/files/awstats.cron
old mode 100644
new mode 100755
diff --git a/modules/awstats/manifests/init.pp b/modules/awstats/manifests/init.pp
index 309f9c6..afd432a 100644
--- a/modules/awstats/manifests/init.pp
+++ b/modules/awstats/manifests/init.pp
@@ -16,6 +16,10 @@ class awstats::base {
         source => 'puppet:///awstats/awstats.cron',
     }
 
+    file { '/etc/awstats/awstats.model.conf':
+        source => 'puppet:///awstats/awstats.model.conf',
+    }
+
     file { '/etc/awstats/awstats.fedoraproject.org.conf':
         source => 'puppet:///awstats/awstats.fedoraproject.org.conf',
     }

commit 4f30e4fbec83b7ba3279158bb3d79918f968df10
Author: Ricky Zhou <[email-masked]>
Date:   Fri Jul 18 08:29:32 2008 +0000

    First test of awstats.

diff --git a/manifests/nodes/log1.fedora.phx.redhat.com.pp b/manifests/nodes/log1.fedora.phx.redhat.com.pp
index b255ab9..21967f8 100644
--- a/manifests/nodes/log1.fedora.phx.redhat.com.pp
+++ b/manifests/nodes/log1.fedora.phx.redhat.com.pp
@@ -5,6 +5,7 @@ node log1{
     include fas
     include phx
     include vpn
+    include awstats::base
 
     $tcpPorts = [ 80 ]
     $udpPorts = [ 514 ]
diff --git a/modules/awstats/README b/modules/awstats/README
new file mode 100644
index 0000000..e9fedd3
--- /dev/null
+++ b/modules/awstats/README
@@ -0,0 +1,14 @@
+=====================
+Awstats
+=====================
+
+-----------
+Usage
+-----------
+
+This is an incomplete module, still in progress
+
+-----------
+Prereqisites
+-----------
+
diff --git a/modules/awstats/files/awstats.cron b/modules/awstats/files/awstats.cron
new file mode 100644
index 0000000..fab3149
--- /dev/null
+++ b/modules/awstats/files/awstats.cron
@@ -0,0 +1,6 @@
+#!/bin/bash
+
+# fedoraproject.org
+mkdir -p /var/www/html/awstats/fedoraproject.org
+/usr/share/awstats/tools/awstats_buildstaticpages.pl -config=fedoraproject.org -update -dir=/var/www/html/awstats/fedoraproject.org > /dev/null
+
diff --git a/modules/awstats/files/awstats.fedoraproject.org.conf b/modules/awstats/files/awstats.fedoraproject.org.conf
new file mode 100644
index 0000000..7f01811
--- /dev/null
+++ b/modules/awstats/files/awstats.fedoraproject.org.conf
@@ -0,0 +1,1500 @@
+# AWSTATS CONFIGURE FILE 6.6
+#-----------------------------------------------------------------------------
+# Copy this file into awstats.www.mydomain.conf and edit this new config file
+# to setup AWStats (See documentation in docs/ directory).
+# The config file must be in /etc/awstats, /usr/local/etc/awstats or /etc (for
+# Unix/Linux) or same directory than awstats.pl (Windows, Mac, Unix/Linux...)
+# To include an environment variable in any parameter (AWStats will replace
+# it with its value when reading it), follow the example:
+# Parameter="__ENVNAME__"
+# Note that environment variable AWSTATS_CURRENT_CONFIG is always defined with
+# the config value in an AWStats running session and can be used like others.
+#-----------------------------------------------------------------------------
+# $Revision: 1.327 $ - $Author: eldy $ - $Date: 2006/04/21 22:28:49 $
+
+
+
+#-----------------------------------------------------------------------------
+# MAIN SETUP SECTION (Required to make AWStats work)
+#-----------------------------------------------------------------------------
+
+# "LogFile" contains the web, ftp or mail server log file to analyze.
+# Possible values: A full path, or a relative path from awstats.pl directory.
+# Example: "/var/log/apache/access.log"
+# Example: "../logs/mycombinedlog.log"
+# You can also use tags in this filename if you need a dynamic file name
+# depending on date or time (Replacement is made by AWStats at the beginning
+# of its execution). This is available tags :
+#   %YYYY-n  is replaced with 4 digits year we were n hours ago
+#   %YY-n    is replaced with 2 digits year we were n hours ago
+#   %MM-n    is replaced with 2 digits month we were n hours ago
+#   %MO-n    is replaced with 3 letters month we were n hours ago
+#   %DD-n    is replaced with day we were n hours ago
+#   %HH-n    is replaced with hour we were n hours ago
+#   %NS-n    is replaced with number of seconds at 00:00 since 1970
+#   %WM-n    is replaced with the week number in month (1-5)
+#   %Wm-n    is replaced with the week number in month (0-4)
+#   %WY-n    is replaced with the week number in year (01-52)
+#   %Wy-n    is replaced with the week number in year (00-51)
+#   %DW-n    is replaced with the day number in week (1-7, 1=sunday)
+#                              use n=24 if you need (1-7, 1=monday)
+#   %Dw-n    is replaced with the day number in week (0-6, 0=sunday)
+#                              use n=24 if you need (0-6, 0=monday)
+#   Use 0 for n if you need current year, month, day, hour...
+# Example: "/var/log/access_log.%YYYY-0%MM-0%DD-0.log"
+# Example: "C:/WINNT/system32/LogFiles/W3SVC1/ex%YY-24%MM-24%DD-24.log"
+# You can also use a pipe if log file come from a pipe :
+# Example: "gzip -d </var/log/apache/access.log.gz |"
+# If there are several log files from load balancing servers :
+# Example: "/pathtotools/logresolvemerge.pl *.log |"
+#
+#LogFile="/usr/share/awstats/tools/logresolvemerge.pl /var/log/hosts/proxy*/*/*/*/http/fedoraproject.org-access.log |"
+LogFile="/usr/share/awstats/tools/logresolvemerge.pl /var/log/hosts/proxy*/*/*/*/http/fedoraproject.org-access.log | sed -e 's/^ //' |"
+
+
+# Enter the log file type you want to analyze.
+# Possible values:
+#  W - For a web log file
+#  S - For a streaming log file
+#  M - For a mail log file
+#  F - For a ftp log file
+# Example: W
+# Default: W
+#
+LogType=W
+
+
+# Enter here your log format (Must match your web server config. See setup
+# instructions in documentation to know how to configure your web server to
+# have the required log format).
+# Possible values: 1,2,3,4 or "your_own_personalized_log_format"
+# 1 - Apache or Lotus Notes/Domino native combined log format (NCSA combined/XLF/ELF log format)
+# 2 - IIS or ISA format (IIS W3C log format). See FAQ-COM115 For ISA.
+# 3 - Webstar native log format.
+# 4 - Apache or Squid native common log format (NCSA common/CLF log format)
+#     With LogFormat=4, some features (browsers, os, keywords...) can't work.
+# "your_own_personalized_log_format" = If your log is ftp, mail or other format,
+#     you must use following keys to define the log format string (See FAQ for
+#     ftp, mail or exotic web log format examples):
+#   %host             Client hostname or IP address (or Sender host for mail log)
+#   %host_r           Receiver hostname or IP address (for mail log)
+#   %lognamequot      Authenticated login/user with format: "john"
+#   %logname          Authenticated login/user with format: john
+#   %time1            Date and time with format: [dd/mon/yyyy:hh:mm:ss +0000] or [dd/mon/yyyy:hh:mm:ss]
+#   %time2            Date and time with format: yyyy-mm-dd hh:mm:ss
+#   %time3            Date and time with format: Mon dd hh:mm:ss or Mon dd hh:mm:ss yyyy
+#   %time4            Date and time with unix timestamp format: dddddddddd
+#   %methodurl        Method and URL with format: "GET /index.html HTTP/x.x"
+#   %methodurlnoprot  Method and URL with format: "GET /index.html"
+#   %method           Method with format: GET
+#   %url              URL only with format: /index.html
+#   %query            Query string (used by URLWithQuery option)
+#   %code             Return code status (with format for web log: 999)
+#   %bytesd           Size of document in bytes
+#   %refererquot      Referer page with format: "http://from.com/from.htm"
+#   %referer          Referer page with format: http://from.com/from.htm
+#   %uabracket        User agent with format: [Mozilla/4.0 (compatible, ...)]
+#   %uaquot           User agent with format: "Mozilla/4.0 (compatible, ...)"
+#   %ua               User agent with format: Mozilla/4.0_(compatible...)
+#   %gzipin           mod_gzip compression input bytes: In:XXX
+#   %gzipout          mod_gzip compression output bytes & ratio: Out:YYY:ZZpct.
+#   %gzipratio        mod_gzip compression ratio: ZZpct.
+#   %deflateratio     mod_deflate compression ratio with format: (ZZ)
+#   %email            EMail sender (for mail log)
+#   %email_r          EMail receiver (for mail log)
+#   %virtualname      Web sever virtual hostname. Use this tag when same log
+#                     contains data of several virtual web servers. AWStats
+#                     will discard records not in SiteDomain nor HostAliases
+#   %cluster          If log file is provided from several computers (merged by
+#                     logresolvemerge.pl), use this to define cluster id field.
+#   %extraX           Another field that you plan to use for building a
+#                     personalized report with ExtraSection feature (See later).
+#   If your log format has some fields not included in this list, use:
+#   %other            Means another not used field
+#   %otherquot        Means another not used double quoted field
+#
+# Examples for Apache combined logs (following two examples are equivalent):
+# LogFormat = 1
+# LogFormat = "%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot"
+#
+# Example for IIS:
+# LogFormat = 2
+#
+LogFormat = 1
+
+
+# If your log field's separator is not a space, you can change this parameter.
+# This parameter is not used if LogFormat is a predefined value (1,2,3,4)
+# Backslash can be used as escape character.
+# Example: " "
+# Example: "\t"
+# Example: "\|"
+# Example: ","
+# Default: " "
+#
+LogSeparator=" "
+
+
+# "SiteDomain" must contain the main domain name, or the main intranet web
+# server name, used to reach the web site.
+# If you share the same log file for several virtual web servers, this
+# parameter is used to tell AWStats to filter record that contains records for
+# this virtual host name only (So check that this virtual hostname can be
+# found in your log file and use a personalized log format that include the
+# %virtualname tag).
+# But for multi hosting a better solution is to have one log file for each
+# virtual web server. In this case, this parameter is only used to generate
+# full URL's links when ShowLinksOnUrl option is set to 1.
+# If analyzing mail log, enter here the domain name of mail server.
+# Example: "myintranetserver"
+# Example: "www.domain.com"
+# Example: "ftp.domain.com"
+# Example: "domain.com"
+#
+SiteDomain="fedoraproject.org"
+
+
+# Enter here all other possible domain names, addresses or virtual host
+# aliases someone can use to access your site. Try to keep only the minimum
+# number of possible names/addresses to have the best performances.
+# You can repeat the "SiteDomain" value in this list.
+# This parameter is used to analyze referer field in log file and to help
+# AWStats to know if a referer URL is a local URL of same site or an URL of
+# another site.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Note: You can also use @/mypath/myfile if list of aliases are in a file.
+# Example: "www.myserver.com localhost 127.0.0.1 REGEX[mydomain\.(net|org)$]"
+#
+HostAliases="REGEX[.*\.fedoraproject\.org]"
+
+
+# If you want to have hosts reported by name instead of ip address, AWStats
+# need to make reverse DNS lookups (if not already done in your log file).
+# With DNSLookup to 0, all hosts will be reported by their IP addresses and
+# not by the full hostname of visitors (except if names are already available
+# in log file).
+# If you want/need to set DNSLookup to 1, don't forget that this will reduce
+# dramatically AWStats update process speed. Do not use on large web sites.
+# Note: Reverse DNS lookup is done on IPv4 only (Enable ipv6 plugin for IPv6).
+# Note: Result of DNS Lookup can be used to build the Country report. However
+# it is highly recommanded to enable the plugin 'geoipfree' or 'geoip' to
+# have an accurate Country report with no need of DNS Lookup.
+# Possible values:
+# 0 - No DNS Lookup
+# 1 - DNS Lookup is fully enabled
+# 2 - DNS Lookup is made only from static DNS cache file (if it exists)
+# Default: 2
+# 
+DNSLookup=2
+
+
+# When AWStats updates its statistics, it stores results of its analysis in 
+# files (AWStats database). All those files are written in the directory
+# defined by the "DirData" parameter. Set this value to the directory where
+# you want AWStats to save its database and working files into.
+# Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser"
+# feature (see later), you need "Write" permissions by web server user on this
+# directory (and "Modify" for Windows NTFS file systems).
+# Example: "/var/lib/awstats"
+# Example: "../data"
+# Example: "C:/awstats_data_dir"
+# Default: "."          (means same directory as awstats.pl)
+#
+DirData="/var/lib/awstats"
+
+
+# Relative or absolute web URL of your awstats cgi-bin directory.
+# This parameter is used only when AWStats is run from command line
+# with -output option (to generate links in HTML reported page).
+# Example: "/awstats"
+# Default: "/cgi-bin"   (means awstats.pl is in "/yourwwwroot/cgi-bin")
+#
+DirCgi="/awstats"
+
+
+# Relative or absolute web URL of your awstats icon directory.
+# If you build static reports ("... -output > outputpath/output.html"), enter
+# path of icon directory relative to the output directory 'outputpath'.
+# Example: "/awstatsicons"
+# Example: "../icon"
+# Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon")
+#
+DirIcons="/awstatsicons"
+
+
+# When this parameter is set to 1, AWStats adds a button on report page to
+# allow to "update" statistics from a web browser. Warning, when "update" is
+# made from a browser, AWStats is run as a CGI by the web server user defined
+# in your web server (user "nobody" by default with Apache, "IUSR_XXX" with
+# IIS), so the "DirData" directory and all already existing history files
+# awstatsMMYYYY[.xxx].txt must be writable by this user. Change permissions if
+# necessary to "Read/Write" (and "Modify" for Windows NTFS file systems).
+# Warning: Update process can be long so you might experience "time out"
+# browser errors if you don't launch AWStats frequently enough.
+# When set to 0, update is only made when AWStats is run from the command
+# line interface (or a task scheduler).
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowToUpdateStatsFromBrowser=0
+
+
+# AWStats saves and sorts its database on a month basis (except if using
+# databasebreak option from command line). 
+# However, if you choose the -month=all from command line or
+# value '-Year-' from CGI combo form to have a report for all year, AWStats
+# needs to reload all data for full year (each month), and sort them,
+# requiring a large amount of time, memory and CPU. This might be a problem
+# for web hosting providers that offer AWStats for large sites, on shared
+# servers, to non CPU cautious customers.
+# For this reason, the 'full year' is only enabled on Command Line by default.
+# You can change this by setting this parameter to 0, 1, 2 or 3.
+# Possible values:
+#  0 - Never allowed
+#  1 - Allowed on CLI only, -Year- value in combo is not visible
+#  2 - Allowed on CLI only, -Year- value in combo is visible but not allowed
+#  3 - Possible on CLI and CGI
+# Default: 2
+#
+AllowFullYearView=2
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When the update process runs, AWStats can set a lock file in TEMP or TMP
+# directory. This lock is to avoid to have 2 update processes running at the
+# same time to prevent unknown conflicts problems and avoid DoS attacks when
+# AllowToUpdateStatsFromBrowser is set to 1.
+# Because, when you use lock file, you can experience sometimes problems in
+# lock file not correctly removed (killed process for example requires that
+# you remove the file manualy), this option is not enabled by default (Do
+# not enable this option with no console server access).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+EnableLockForUpdate=1
+
+
+# AWStats can do reverse DNS lookups through a static DNS cache file that was
+# previously created manually. If no path is given in static DNS cache file
+# name, AWStats will search DirData directory. This file is never changed.
+# This option is not used if DNSLookup=0.
+# Note: DNS cache file format is 'minsince1970 ipaddress resolved_hostname'
+# or just 'ipaddress resolved_hostname'
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscache"
+# Default: "dnscache.txt"
+#
+DNSStaticCacheFile="dnscache.txt"
+
+
+# AWStats can do reverse DNS lookups through a DNS cache file that was created
+# by a previous run of AWStats. This file is erased and recreated after each
+# statistics update process. You don't need to create and/or edit it.
+# AWStats will read and save this file in DirData directory.
+# This option is used only if DNSLookup=1.
+# Note: If a DNSStaticCacheFile is available, AWStats will check for DNS
+# lookup in DNSLastUpdateCacheFile after checking into DNSStaticCacheFile.
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscachelastupdate"
+# Default: "dnscachelastupdate.txt"
+#
+DNSLastUpdateCacheFile="dnscachelastupdate.txt"
+
+
+# You can specify specific IP addresses that should NOT be looked up in DNS.
+# This option is used only if DNSLookup=1.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "123.123.123.123 REGEX[^192\.168\.]"
+# Default: ""
+#
+SkipDNSLookupFor=""
+
+
+# The following two parameters allow you to protect a config file from being
+# read by AWStats when called from a browser if web user has not been
+# authenticated. Your AWStats program must be in a web protected "realm" (With
+# Apache, you can use .htaccess files to do so. With other web servers, see
+# your server setup manual).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowAccessFromWebToAuthenticatedUsersOnly=0
+
+
+# This parameter gives the list of all authorized authenticated users to view
+# statistics for this domain/config file. This parameter is used only if
+# AllowAccessFromWebToAuthenticatedUsersOnly is set to 1.
+# Change : Effective immediatly
+# Example: "user1 user2"
+# Example: "__REMOTE_USER__"
+# Default: ""
+#
+AllowAccessFromWebToFollowingAuthenticatedUsers=""
+
+
+# When this parameter is defined to something, the IP address of the user that
+# reads its statistics from a browser (when AWStats is used as a CGI) is
+# checked and must match one of the IP address values or ranges.
+# Change : Effective immediatly
+# Example: "127.0.0.1 123.123.123.1-123.123.123.255"
+# Default: ""
+#
+AllowAccessFromWebToFollowingIPAddresses=""
+
+
+# If the "DirData" directory (see above) does not exist, AWStats return an
+# error. However, you can ask AWStats to create it.
+# This option can be used by some Web Hosting Providers that has defined a 
+# dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and
+# don't want to have to create a new directory each time they add a new user.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+CreateDirDataIfNotExists=0
+
+
+# You can choose in which format the Awstats history database is saved.
+# Note: Using "xml" format make AWStats building database files three times
+# larger than using "text" format.
+# Change : Database format is switched after next update
+# Possible values: text or xml
+# Default: text
+#
+BuildHistoryFormat=text
+
+
+# If you prefer having the report output pages be built as XML compliant pages
+# instead of simple HTML pages, you can set this to 'xhtml' (May not work
+# properly with old browsers).
+# Change : Effective immediatly
+# Possible values: html or xhtml
+# Default: html
+#
+BuildReportFormat=html
+
+
+# AWStats databases can be updated from command line of from a browser (when
+# used as a cgi program). So AWStats database files need write permission
+# for both command line user and default web server user (nobody for Unix,
+# IUSR_xxx for IIS/Windows,...).
+# To avoid permission problems between update process (run by an admin user)
+# and CGI process (ran by a low level user), AWStats can save its database 
+# files with read and write permissions for everyone.
+# By default, AWStats keeps default user permissions on updated files. If you 
+# set AllowToUpdateStatsFromBrowser to 1, you can change this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+SaveDatabaseFilesWithPermissionsForEveryone=0
+
+
+# AWStats can purge log file, after analyzing it. Note that AWStats is able
+# to detect new lines in a log file, to process only them, so you can launch
+# AWStats as often as you want, even with this parameter to 0.
+# With 0, no purge is made, so you must use a scheduled task or a web server
+# that make this purge frequently.
+# With 1, the purge of the log file is made each time AWStats update is run.
+# This parameter doesn't work with IIS (This web server doesn't let its log
+# file to be purged).
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+PurgeLogFile=0
+
+
+# When PurgeLogFile is setup to 1, AWStats will clean your log file after
+# processing it. You can however keep an archive file of all processed log
+# records by setting this parameter (For example if you want to use another
+# log analyzer). The archived log file is saved in "DirData" with name
+# awstats_archive.configname[.suffix].log
+# This parameter is not used if PurgeLogFile=0
+# Change : Effective for new updates only
+# Possible values: 0, 1, or tags (See LogFile parameter) for suffix
+# Example: 1
+# Example: %YYYY%MM%DD
+# Default: 0
+#
+ArchiveLogRecords=0
+
+
+# Each time you run the update process, AWStats overwrites the 'historic file'
+# for the month (awstatsMMYYYY[.*].txt) with the updated one.
+# When write errors occurs (IO, disk full,...), this historic file can be
+# corrupted and must be deleted. Because this file contains information of all
+# past processed log files, you will loose old stats if removed. So you can
+# ask AWStats to save last non corrupted file in a .bak file. This file is
+# stored in "DirData" directory with other 'historic files'.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+KeepBackupOfHistoricFiles=0
+
+
+# Default index page name for your web server.
+# Change : Effective for new updates only
+# Example: "index.php index.html default.html"
+# Default: "index.html"
+#
+DefaultFile="index.html"
+
+
+# Do not include access from clients that match following criteria.
+# If your log file contains IP addresses in host field, you must enter here
+# matching IP addresses criteria.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "SkipHosts" is "OnlyHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Example: "localhost REGEX[^.*\.localdomain$]"
+# Default: ""
+#
+SkipHosts="127.0.0.1"
+
+
+# Do not include access from clients with a user agent that match following
+# criteria. If you want to exclude a robot, you should update the robots.pm
+# file instead of this parameter.
+# The opposite parameter of "SkipUserAgents" is "OnlyUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "konqueror REGEX[ua_test_v\d\.\d]"
+# Default: ""
+#
+SkipUserAgents=""
+
+
+# Use SkipFiles to ignore access to URLs that match one of following entries.
+# You can enter a list of not important URLs (like framed menus, hidden pages,
+# etc...) to exclude them from statistics. You must enter here exact relative
+# URL as found in log file, or a matching REGEX value. Check apply on URL with
+# all its query paramaters.
+# For example, to ignore /badpage.php, just add "/badpage.php". To ignore all
+# pages in a particular directory, add "REGEX[^\/directorytoexclude]".
+# The opposite parameter of "SkipFiles" is "OnlyFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "/badpage.php /page.php?param=x REGEX[^\/excludedirectory]"
+# Default: ""
+#
+SkipFiles=""
+
+
+# Use SkipReferrersBlackList if you want to exclude records coming from a SPAM
+# referrer. Parameter must receive a local file name containing rules applied
+# on referrer field. If parameter is empty, no filter is applied.
+# An example of such a file is available in lib/blacklist.txt
+# You can download updated version at http://www.jayallen.org/comment_spam/
+# Change : Effective for new updates only
+# Example: "/mylibpath/blacklist.txt"
+# Default: ""
+#
+# WARNING!! Using this feature make AWStats running very slower (5 times slower
+# with black list file provided with AWStats !
+#
+SkipReferrersBlackList=""
+
+
+# Include in stats, only accesses from hosts that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular hosts, you can add those host names in
+# this parameter.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "OnlyHosts" is "SkipHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Default: ""
+#
+OnlyHosts=""
+
+
+# Include in stats, only accesses from user agent that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular browsers, you can add their user agents
+# string in this parameter.
+# The opposite parameter of "OnlyUserAgents" is "SkipUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "msie"
+# Default: ""
+#
+OnlyUserAgents=""
+
+
+# Include in stats, only accesses to URLs that match one of following entries.
+# For example, if you want AWStats to filter access to keep only stats that
+# match a particular string, like a particular directory, you can add this
+# directory name in this parameter.
+# The opposite parameter of "OnlyFiles" is "SkipFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "REGEX[marketing_directory] REGEX[office\/.*\.(csv|sxw)$]"
+# Default: ""
+#
+OnlyFiles=""
+
+
+# Add here a list of kind of url (file extension) that must be counted as
+# "Hit only" and not as a "Hit" and "Page/Download". You can set here all
+# image extensions as they are hit downloaded that must be counted but they
+# are not viewed pages. URLs with such extensions are not included in the TOP
+# Pages/URL report.
+# Note: If you want to exclude particular URLs from stats (No Pages and no
+# Hits reported), you must use SkipFiles parameter.
+# Change : Effective for new updates only
+# Example: "css js class gif jpg jpeg png bmp ico zip arj gz z wav mp3 wma mpg"
+# Example: ""
+# Default: "css js class gif jpg jpeg png bmp ico"
+#
+NotPageList="css js class gif jpg jpeg png bmp ico swf"
+
+
+# By default, AWStats considers that records found in web log file are
+# successful hits if HTTP code returned by server is a valid HTTP code (200
+# and 304). Any other code are reported in HTTP status chart.
+# Note that HTTP 'control codes', like redirection (302, 305) are not added by
+# default in this list as they are not pages seen by a visitor but are
+# protocol exchange codes to tell the browser to ask another page. Because
+# this other page will be counted and seen with a 200 or 304 code, if you 
+# add such codes, you will have 2 pages viewed reported for only one in facts.
+# Change : Effective for new updates only
+# Example: "200 304 302 305"
+# Default: "200 304"
+#
+ValidHTTPCodes="200 304"
+
+
+# By default, AWStats considers that records found in mail log file are
+# successful mail transfers if field that represent return code in analyzed
+# log file match values defined by this parameter.
+# Change : Effective for new updates only
+# Example: "1 250 200"
+# Default: "1 250"
+#
+ValidSMTPCodes="1 250"
+
+
+# Some web servers on some Operating systems (IIS-Windows) consider that a
+# login with same value but different case are the same login. To tell AWStats
+# to also consider them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+AuthenticatedUsersNotCaseSensitive=0
+
+
+# Some web servers on some Operating systems (IIS-Windows) considers that two
+# URLs with same value but different case are the same URL. To tell AWStats to
+# also considers them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+URLNotCaseSensitive=0
+
+
+# Keep or remove the anchor string you can find in some URLs.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+URLWithAnchor=0
+
+
+# In URL links, "?" char is used to add parameter's list in URLs. Syntax is:
+# /mypage.html?param1=value1&param2=value2
+# However, some servers/sites use also other chars to isolate dynamic part of
+# their URLs. You can complete this list with all such characters.
+# Change : Effective for new updates only
+# Example: "?;,"
+# Default: "?;"
+#
+URLQuerySeparators="?;"
+
+
+# Keep or remove the query string to the URL in the statistics for individual
+# pages. This is primarily used to differentiate between the URLs of dynamic
+# pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as two
+# different pages.
+# Warning, when set to 1, memory required to run AWStats is dramatically
+# increased if you have a lot of changing URLs (for example URLs with a random
+# id inside). Such web sites should not set this option to 1 or use seriously
+# the next parameter URLWithQueryWithOnlyFollowingParameters (or eventually 
+# URLWithQueryWithoutFollowingParameters).
+# Change : Effective for new updates only
+# Possible values:
+# 0 - URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used     (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLWithQuery=0
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to keep only parameters
+# you need (if you know them) before counting, manipulating and storing URL.
+# Enter here list of wanted parameters. For example, with "param", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithoutFollowingParameters.
+# Change : Effective for new updates only
+# Example: "param"
+# Default: ""
+# 
+URLWithQueryWithOnlyFollowingParameters=""
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to remove such parameters
+# from the URL before counting, manipulating and storing URL. Enter here list
+# of all non wanted parameters. For example if you enter "id", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithOnlyFollowingParameters.
+# Change : Effective for new updates only
+# Example: "PHPSESSID jsessionid"
+# Default: ""
+# 
+URLWithQueryWithoutFollowingParameters=""
+
+
+# Keep or remove the query string to the referrer URL in the statistics for
+# external referrer pages. This is used to differentiate between the URLs of
+# dynamic referrer pages. If set to 1, mypage.html?id=x and mypage.html?id=y
+# are counted as two different referrer pages.
+# Change : Effective for new updates only
+# Possible values:
+# 0 - Referrer URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used      (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLReferrerWithQuery=0
+
+
+# AWStats can detect setup problems or show you important informations to have
+# a better use. Keep this to 1, except if AWStats says you can change it.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 1
+#
+WarningMessages=1
+
+
+# When an error occurs, AWStats outputs a message related to errors. If you
+# want (in most cases for security reasons) to have no error messages, you
+# can set this parameter to your personalized generic message.
+# Change : Effective immediatly
+# Example: "An error occurred. Contact your Administrator"
+# Default: ""
+#
+ErrorMessages=""
+
+
+# AWStat can be run with debug=x parameter to output various informations
+# to help in debugging or solving troubles. If you want to allow this (not
+# enabled by default for security reasons), set this parameter to 0.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+DebugMessages=0
+
+
+# To help you to detect if your log format is good, AWStats reports an error
+# if all the first NbOfLinesForCorruptedLog lines have a format that does not
+# match the LogFormat parameter.
+# However, some worm virus attack on your web server can result in a very high
+# number of corrupted lines in your log. So if you experience awstats stop
+# because of bad virus records at the beginning of your log file, you can
+# increase this parameter (very rare).
+# Change : Effective for new updates only
+# Default: 50
+#
+NbOfLinesForCorruptedLog=50
+
+
+# For some particular integration needs, you may want to have CGI links to
+# point to another script than awstats.pl.
+# Use the name of this script in WrapperScript parameter.
+# Change : Effective immediatly
+# Example: "awstatslauncher.pl"
+# Default: ""
+#
+WrapperScript=""
+
+
+# DecodeUA must be set to 1 if you use Roxen web server. This server converts
+# all spaces in user agent field into %20. This make the AWStats robots, OS
+# and browsers detection fail in some cases. Just change it to 1 if and only
+# if your web server is Roxen.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+DecodeUA=0
+
+
+# MiscTrackerUrl can be used to make AWStats able to detect some miscellaneous
+# things, that can not be tracked on other way, like:
+# - Javascript disabled
+# - Java enabled
+# - Screen size
+# - Color depth
+# - Macromedia Director plugin
+# - Macromedia Shockwave plugin
+# - Realplayer G2 plugin
+# - QuickTime plugin
+# - Mediaplayer plugin
+# - Acrobat PDF plugin
+# To enable all these features, you must copy the awstats_misc_tracker.js file
+# into a /js/ directory stored in your web document root and add the following
+# HTML code at the end of your index page (but before </BODY>) :
+#
+# <script language=javascript src="/js/awstats_misc_tracker.js"></script>
+# <noscript><img src="/js/awstats_misc_tracker.js?nojs=y" height=0 width=0 border=0 style="display: none"></noscript>
+#
+# If code is not added in index page, all those detection capabilities will be
+# disabled. You must also check that ShowScreenSizeStats and ShowMiscStats
+# parameters are set to 1 to make results appear in AWStats report page.
+# If you want to use another directory than /js/, you must also change the
+# awstatsmisctrackerurl variable into the awstats_misc_tracker.js file.
+# Change : Effective for new updates only.
+# Possible value: URL of javascript tracker file added in your HTML code.
+# Default: "/js/awstats_misc_tracker.js"
+#
+MiscTrackerUrl="/js/awstats_misc_tracker.js"
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# The following values allow you to define accuracy of AWStats entities
+# (robots, browsers, os, referers, file types) detection.
+# It might be a good idea for large web sites or ISP that provides AWStats to
+# high number of customers, to set this parameter to 1 (or 0), instead of 2.
+# Possible values:
+#    0      = No detection,
+#    1      = Medium/Standard detection
+#    2      = Full detection
+# Change : Effective for new updates only
+# Note   : LevelForBrowsersDetection can also accept value "allphones". This
+#          enable detailed detection of phone/pda browsers.
+# Default: 2 (0 for LevelForWormsDetection)
+#
+LevelForBrowsersDetection=2         # 0 disables Browsers detection.
+                                    # 2 reduces AWStats speed by 2%
+                                    # allphones reduces AWStats speed by 5%
+LevelForOSDetection=2               # 0 disables OS detection.
+                                    # 2 reduces AWStats speed by 3%
+LevelForRefererAnalyze=2            # 0 disables Origin detection.
+                                    # 2 reduces AWStats speed by 14%
+LevelForRobotsDetection=2           # 0 disables Robots detection.
+                                    # 2 reduces AWStats speed by 2.5%
+LevelForSearchEnginesDetection=2    # 0 disables Search engines detection.
+                                    # 2 reduces AWStats speed by 9%
+LevelForKeywordsDetection=2         # 0 disables Keyphrases/Keywords detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForFileTypesDetection=2        # 0 disables File types detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForWormsDetection=0            # 0 disables Worms detection.
+                                    # 2 reduces AWStats speed by 15%
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When you use AWStats as a CGI, you can have the reports shown in HTML frames.
+# Frames are only available for report viewed dynamically. When you build
+# pages from command line, this option is not used and no frames are built.
+# Possible values: 0 or 1
+# Default: 1
+#
+UseFramesWhenCGI=1
+
+
+# This parameter asks your browser to open detailed reports into a different
+# window than the main page.
+# Possible values:
+# 0 - Open all in same browser window
+# 1 - Open detailed reports in another window except if using frames
+# 2 - Open always in a different window even if reports are framed
+# Default: 1
+#
+DetailedReportsOnNewWindows=1
+
+
+# You can add, in the HTML report page, a cache lifetime (in seconds) that
+# will be returned to the browser in HTTP header answer by server.
+# This parameter is not used when reports are built with -staticlinks option.
+# Example: 3600
+# Default: 0
+#
+Expires=3600
+
+
+# To avoid too large web pages, you can ask AWStats to limit number of rows of
+# all reported charts to this number when no other limits apply.
+# Default: 1000
+#
+MaxRowsInHTMLOutput=1000
+
+
+# Set your primary language (ISO-639-1 language codes).
+# Possible values:
+#  Albanian=al, Bosnian=ba, Bulgarian=bg, Catalan=ca,
+#  Chinese (Taiwan)=tw, Chinese (Simpliefied)=cn, Croatian=hr, Czech=cz,
+#  Danish=dk, Dutch=nl, English=en, Estonian=et, Euskara=eu, Finnish=fi,
+#  French=fr, Galician=gl, German=de, Greek=gr, Hebrew=he, Hungarian=hu,
+#  Icelandic=is, Indonesian=id, Italian=it, Japanese=jp, Korean=ko,
+#  Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl,
+#  Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru,
+#  Serbian=sr, Slovak=sk, Slovenian=si, Spanish=es, Swedish=se, Turkish=tr,
+#  Ukrainian=ua, Welsh=cy.
+#  First available language accepted by browser=auto
+# Default: "auto"
+#
+Lang="auto"
+
+
+# Set the location of language files.
+# Example: "/usr/share/awstats/lang"
+# Default: "./lang" (means lang directory is in same location than awstats.pl)
+#
+DirLang="./lang"
+
+
+# Show menu header with reports' links
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowMenu=1					
+
+
+# You choose here which reports you want to see in the main page and what you
+# want to see in those reports.
+# Possible values:
+#  0  - Report is not shown at all
+#  1  - Report is shown in main page with an entry in menu and default columns
+# XYZ - Report shows column informations defined by code X,Y,Z...
+#       X,Y,Z... are code letters among the following:
+#        U = Unique visitors
+#        V = Visits
+#        P = Number of pages
+#        H = Number of hits (or mails)
+#        B = Bandwith (or total mail size for mail logs)
+#        L = Last access date
+#        E = Entry pages
+#        X = Exit pages
+#        C = Web compression (mod_gzip,mod_deflate)
+#        M = Average mail size (mail logs)
+#
+
+# Show monthly summary
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowSummary=UVPHB
+
+# Show monthly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowMonthStats=UVPHB
+
+# Show days of month chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: VPHB, Possible column codes: VPHB
+ShowDaysOfMonthStats=VPHB
+
+# Show days of week chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDaysOfWeekStats=PHB
+
+# Show hourly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowHoursStats=PHB
+
+# Show domains/country chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDomainsStats=PHB
+
+# Show hosts chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHBL, Possible column codes: PHBL
+ShowHostsStats=PHBL
+
+# Show authenticated users chart
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHBL
+ShowAuthenticatedUsers=0
+
+# Show robots chart
+# Context: Web, Streaming
+# Default: HBL, Possible column codes: HBL
+ShowRobotsStats=HBL
+
+# Show worms chart
+# Context: Web, Streaming
+# Default: 0 (If set to other than 0, see also LevelForWormsDetection), Possible column codes: HBL
+ShowWormsStats=0
+
+# Show email senders chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailSenders=0
+
+# Show email receivers chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailReceivers=0
+
+# Show session chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowSessionsStats=1
+
+# Show pages-url chart.
+# Context: Web, Streaming, Ftp
+# Default: PBEX, Possible column codes: PBEX
+ShowPagesStats=PBEX
+
+# Show file types chart.
+# Context: Web, Streaming, Ftp
+# Default: HB, Possible column codes: HBC
+ShowFileTypesStats=HB
+
+# Show file size chart (Not yet available)
+# Context: Web, Streaming, Mail, Ftp
+# Default: 1, Possible column codes: None
+ShowFileSizesStats=0		
+
+# Show operating systems chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowOSStats=1
+
+# Show browsers chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowBrowsersStats=1
+
+# Show screen size chart
+# Context: Web, Streaming
+# Default: 0 (If set to 1, see also MiscTrackerUrl), Possible column codes: None
+ShowScreenSizeStats=0
+
+# Show origin chart
+# Context: Web, Streaming
+# Default: PH, Possible column codes: PH
+ShowOriginStats=PH
+
+# Show keyphrases chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeyphrasesStats=1
+
+# Show keywords chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeywordsStats=1
+
+# Show misc chart
+# Context: Web, Streaming
+# Default: a (See also MiscTrackerUrl parameter), Possible column codes: anjdfrqwp
+ShowMiscStats=a
+
+# Show http errors chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowHTTPErrorsStats=1
+
+# Show smtp errors chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: None
+ShowSMTPErrorsStats=0
+
+# Show the cluster report (Your LogFormat must contains the %cluster tag)
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHB
+ShowClusterStats=0
+
+
+# Some graphical reports are followed by the data array of values.
+# If you don't want this array (to reduce the report size for example), you
+# can set thoose options to 0.
+# Possible values: 0 or 1
+# Default: 1
+#
+# Data array values for the ShowMonthStats report
+AddDataArrayMonthStats=1
+# Data array values for the ShowDaysOfMonthStats report
+AddDataArrayShowDaysOfMonthStats=1
+# Data array values for the ShowDaysOfWeekStats report
+AddDataArrayShowDaysOfWeekStats=1
+# Data array values for the ShowHoursStats report
+AddDataArrayShowHoursStats=1
+
+
+# In the Origin chart, you have stats on where your hits came from. You can
+# include hits on pages that come from pages of same sites in this chart.
+# Possible values: 0 or 1
+# Default: 0
+#
+IncludeInternalLinksInOriginSection=0
+
+
+# The following parameters can be used to choose the maximum number of lines
+# shown for the particular following reports.
+#
+# Stats by countries/domains
+MaxNbOfDomain = 10
+MinHitDomain  = 1
+# Stats by hosts
+MaxNbOfHostsShown = 10
+MinHitHost    = 1
+# Stats by authenticated users
+MaxNbOfLoginShown = 10
+MinHitLogin   = 1
+# Stats by robots
+MaxNbOfRobotShown = 10
+MinHitRobot   = 1
+# Stats by pages
+MaxNbOfPageShown = 10
+MinHitFile    = 1
+# Stats by OS
+MaxNbOfOsShown = 10
+MinHitOs      = 1
+# Stats by browsers
+MaxNbOfBrowsersShown = 10
+MinHitBrowser = 1
+# Stats by screen size
+MaxNbOfScreenSizesShown = 5
+MinHitScreenSize = 1
+# Stats by window size (following 2 parameters are not yet used)
+MaxNbOfWindowSizesShown = 5
+MinHitWindowSize = 1
+# Stats by referers
+MaxNbOfRefererShown = 10
+MinHitRefer   = 1
+# Stats for keyphrases
+MaxNbOfKeyphrasesShown = 10
+MinHitKeyphrase = 1
+# Stats for keywords
+MaxNbOfKeywordsShown = 10
+MinHitKeyword = 1
+# Stats for sender or receiver emails
+MaxNbOfEMailsShown = 20
+MinHitEMail   = 1
+
+
+# Choose if you want the week report to start on sunday or monday
+# Possible values:
+# 0 - Week starts on sunday
+# 1 - Week starts on monday
+# Default: 1
+#
+FirstDayOfWeek=1
+
+
+# List of visible flags that link to other language translations.
+# See Lang parameter for list of allowed flag/language codes.
+# If you don't want any flag link, set ShowFlagLinks to "".
+# This parameter is used only if ShowMenu parameter is set to 1.
+# Possible values: "" or "language_codes_separated_by_space"
+# Example: "en es fr nl de"
+# Default: ""
+#
+ShowFlagLinks=""
+
+
+# Each URL, shown in stats report views, are links you can click.
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowLinksOnUrl=1
+
+
+# When AWStats builds HTML links in its report pages, it starts those links
+# with "http://". However some links might be HTTPS links, so you can enter
+# here the root of all your HTTPS links. If all your site is a SSL web site,
+# just enter "/".
+# This parameter is not used if ShowLinksOnUrl is 0.
+# Example: "/shopping"
+# Example: "/"
+# Default: ""
+#
+UseHTTPSLinkForUrl=""
+
+
+# Maximum length of URL part shown on stats page (number of characters).
+# This affects only URL visible text, links still work.
+# Default: 64
+#
+MaxLengthOfShownURL=64
+
+
+# You can enter HTML code that will be added at the top of AWStats reports.
+# Default: ""
+#
+HTMLHeadSection=""
+
+
+# You can enter HTML code that will be added at the end of AWStats reports.
+# Great to add advert ban.
+# Default: ""
+#
+HTMLEndSection=""
+
+
+# You can set Logo and LogoLink to use your own logo.
+# Logo must be the name of image file (must be in $DirIcons/other directory).
+# LogoLink is the expected URL when clicking on Logo.
+# Default: "awstats_logo6.png"
+#
+Logo="awstats_logo6.png"
+LogoLink="http://awstats.sourceforge.net"
+
+
+# Value of maximum bar width/height for horizontal/vertical HTML graphics bars.
+# Default: 260/90
+#
+BarWidth   = 260
+BarHeight  = 90
+
+
+# You can ask AWStats to use a particular CSS (Cascading Style Sheet) to
+# change its look. To create a style sheet, you can use samples provided with
+# AWStats in wwwroot/css directory.
+# Example: "/awstatscss/awstats_bw.css"
+# Example: "/css/awstats_bw.css"
+# Default: ""
+#
+StyleSheet=""
+
+
+# Those color parameters can be used (if StyleSheet parameter is not used)
+# to change AWStats look.
+# Example: color_name="RRGGBB"	# RRGGBB is Red Green Blue components in Hex
+#
+color_Background="FFFFFF"		# Background color for main page (Default = "FFFFFF")
+color_TableBGTitle="CCCCDD"		# Background color for table title (Default = "CCCCDD")
+color_TableTitle="000000"		# Table title font color (Default = "000000")
+color_TableBG="CCCCDD"			# Background color for table (Default = "CCCCDD")
+color_TableRowTitle="FFFFFF"	# Table row title font color (Default = "FFFFFF")
+color_TableBGRowTitle="ECECEC"	# Background color for row title (Default = "ECECEC")
+color_TableBorder="ECECEC"		# Table border color (Default = "ECECEC")
+color_text="000000"				# Color of text (Default = "000000")
+color_textpercent="606060"		# Color of text for percent values (Default = "606060")
+color_titletext="000000"		# Color of text title within colored Title Rows (Default = "000000")
+color_weekend="EAEAEA"			# Color for week-end days (Default = "EAEAEA")
+color_link="0011BB"				# Color of HTML links (Default = "0011BB")
+color_hover="605040"			# Color of HTML on-mouseover links (Default = "605040") 
+color_u="FFAA66"				# Background color for number of unique visitors (Default = "FFAA66")
+color_v="F4F090"				# Background color for number of visites (Default = "F4F090")
+color_p="4477DD"				# Background color for number of pages (Default = "4477DD")
+color_h="66DDEE"				# Background color for number of hits (Default = "66DDEE")
+color_k="2EA495"				# Background color for number of bytes (Default = "2EA495")
+color_s="8888DD"				# Background color for number of search (Default = "8888DD")
+color_e="CEC2E8"				# Background color for number of entry pages (Default = "CEC2E8")
+color_x="C1B2E2"				# Background color for number of exit pages (Default = "C1B2E2")
+
+
+
+#-----------------------------------------------------------------------------
+# PLUGINS
+#-----------------------------------------------------------------------------
+
+# Add here all plugin files you want to load.
+# Plugin files must be .pm files stored in 'plugins' directory.
+# Uncomment LoadPlugin lines to enable a plugin after checking that perl
+# modules required by the plugin are installed.
+
+# Plugin: Tooltips
+# Perl modules required: None
+# Add some tooltips help on HTML report pages.
+# Note that enabling this kind of help will increased HTML report pages size,
+# so server load and bandwidth.
+#
+LoadPlugin="tooltips"
+
+# Plugin: DecodeUTFKeys
+# Perl modules required: Encode and URI::Escape
+# Allow AWStats to show correctly (in language charset) keywords/keyphrases
+# strings even if they were UTF8 coded by the referer search engine.
+#
+#LoadPlugin="decodeutfkeys"
+
+# Plugin: IPv6
+# Perl modules required: Net::IP and Net::DNS
+# This plugin gives AWStats capability to make reverse DNS lookup on IPv6
+# addresses.
+# Note: If you are interested in having country report, you should use the
+# geoipfree or geoip plugin instead of enabled reverse DNS lookup.
+#
+#LoadPlugin="ipv6"
+
+# Plugin: HashFiles
+# Perl modules required: Storable
+# AWStats DNS cache files are read/saved as native hash files. This increases
+# DNS cache files loading speed, above all for very large web sites.
+#
+LoadPlugin="hashfiles"
+
+# Plugin: GeoIP
+# Perl modules required: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IP module 
+# from Maxmind, database more up to date) or the GeoIPfree plugin (need
+# Perl Geo::IPfree module, database less up to date).
+# This plugin reduces AWStats speed of 8% !
+#
+LoadPlugin="geoip GEOIP_STANDARD /usr/share/GeoIP/GeoIP.dat"
+
+# Plugin: GeoIPfree
+# Perl modules required: Geo::IPfree version 0.2+ (from Graciliano M.P.)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IPfree
+# module, database less up to date) or the GeoIP plugin (need Perl Geo::IP
+# module from Maxmind, database more up to date).
+# Note: Activestate provide a corrupted version of Geo::IPfree 0.2 Perl
+# module, so install it from elsewhere (from www.cpan.org for example).
+# This plugin reduces AWStats speed of 10% !
+#
+#LoadPlugin="geoipfree"
+
+# Plugin: GeoIP_Region_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by regions. Only regions for US and 
+# Canada can be detected.
+# Note: This plugin need Maxmind GeoIP Perl module AND the region database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Region database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_region_maxmind GEOIP_STANDARD /pathto/GeoIPRegion.dat"
+
+# Plugin: GeoIP_City_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by cities (with country and regions
+# informations for major countries).
+# Note: This plugin need Maxmind GeoIP Perl module AND the city database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the City database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /pathto/GeoIPCity.dat"
+
+# Plugin: GeoIP_ISP_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by ISP.
+# Note: This plugin need Maxmind GeoIP Perl module AND the ISP database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the ISP database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_isp_maxmind GEOIP_STANDARD /pathto/GeoIPISP.dat"
+
+# Plugin: GeoIP_Org_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by Organization name
+# Note: This plugin need Maxmind GeoIP Perl module AND the Org database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Org database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_org_maxmind GEOIP_STANDARD /pathto/GeoIPOrg.dat"
+
+# Plugin: UserInfo
+# Perl modules required: None
+# Add a text (Firtname, Lastname, Office Department, ...) in authenticated user
+# reports for each login value.
+# A text file called userinfo.myconfig.txt, with two fields (first is login,
+# second is text to show, separated by a tab char) must be created in DirData
+# directory.
+#
+#LoadPlugin="userinfo"
+
+# Plugin: HostInfo
+# Perl modules required: Net::XWhois
+# Add a column into host chart with a link to open a popup window that shows
+# info on host (like whois records).
+#
+#LoadPlugin="hostinfo"
+
+# Plugin: ClusterInfo
+# Perl modules required: None
+# Add a text (for example a full hostname) in cluster reports for each cluster
+# number.
+# A text file called clusterinfo.myconfig.txt, with two fields (first is
+# cluster number, second is text to show) separated by a tab char. must be
+# created into DirData directory.
+# Note this plugin is useless if ShowClusterStats is set to 0 or if you don't
+# use a personalized log format that contains %cluster tag.
+#
+#LoadPlugin="clusterinfo"
+
+# Plugin: UrlAliases
+# Perl modules required: None
+# Add a text (Page title, description...) in URL reports before URL value.
+# A text file called urlalias.myconfig.txt, with two fields (first is URL,
+# second is text to show, separated by a tab char) must be created into
+# DirData directory.
+#
+#LoadPlugin="urlalias"
+
+# Plugin: TimeHiRes
+# Perl modules required: Time::HiRes (if Perl < 5.8)
+# Time reported by -showsteps option is in millisecond. For debug purpose.
+#
+#LoadPlugin="timehires"		
+
+# Plugin: TimeZone
+# Perl modules required: Time::Local
+# Allow AWStats to correct a bad timezone for user of some IIS that use
+# GMT date in its log instead of local server time.
+# This module is useless for Apache and most IIS version.
+# This plugin reduces AWStats speed of 40% !!!!!!!
+#
+#LoadPlugin="timezone +2"
+
+# Plugin: Rawlog
+# Perl modules required: None
+# This plugin adds a form in AWStats main page to allow users to see raw
+# content of current log files. A filter is also available.
+#
+#LoadPlugin="rawlog"
+
+# Plugin: GraphApplet
+# Perl modules required: None
+# Supported charts are built by a 3D graphic applet.
+#
+#LoadPlugin="graphapplet /awstatsclasses"				# EXPERIMENTAL FEATURE
+
+
+
+#-----------------------------------------------------------------------------
+# EXTRA SECTIONS
+#-----------------------------------------------------------------------------
+
+# You can define your own charts, you choose here what are rows and columns
+# keys. This feature is particularly useful for marketing purpose, tracking
+# products orders for example.
+# For this, edit all parameters of Extra section. Each set of parameter is a
+# different chart. For several charts, duplicate section changing the number.
+# Note: Each Extra section reduces AWStats speed by 8%.
+#
+# WARNING: A wrong setup of Extra section might result in too large arrays
+# that will consume all your memory, making AWStats unusable after several
+# updates, so be sure to setup it correctly.
+# In most cases, you don't need this feature.
+#
+# ExtraSectionNameX is title of your personalized chart.
+# ExtraSectionCodeFilterX is list of codes the record code field must match.
+#   Put an empty string for no test on code.
+# ExtraSectionConditionX are conditions you can use to count or not the hit,
+#   Use one of the field condition
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,extraX)
+#   and a regex to match, after a coma. Use "||" for "OR".
+# ExtraSectionFirstColumnTitleX is the first column title of the chart.
+# ExtraSectionFirstColumnValuesX is a string to tell AWStats which field to
+#   extract value from
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,VHOST,extraX)
+#   and how to extract the value (using regex syntax). Each different value
+#   found will appear in first column of report on a different row. Be sure
+#   that list of different possible values will not grow indefinitely.
+# ExtraSectionFirstColumnFormatX is the string used to write value.
+# ExtraSectionStatTypesX are things you want to count. You can use standard
+#   code letters (P for pages,H for hits,B for bandwidth,L for last access).
+# ExtraSectionAddAverageRowX add a row at bottom of chart with average values.
+# ExtraSectionAddSumRowX add a row at bottom of chart with sum values.
+# MaxNbOfExtraX is maximum number of rows shown in chart.
+# MinHitExtraX is minimum number of hits required to be shown in chart.
+#
+
+# Example to report the 20 products the most ordered by "order.cgi" script
+#ExtraSectionName1="Product orders"
+#ExtraSectionCodeFilter1="200 304"
+#ExtraSectionCondition1="URL,\/cgi\-bin\/order\.cgi||URL,\/cgi\-bin\/order2\.cgi"
+#ExtraSectionFirstColumnTitle1="Product ID"
+#ExtraSectionFirstColumnValues1="QUERY_STRING,productid=([^&]+)"
+#ExtraSectionFirstColumnFormat1="%s"
+#ExtraSectionStatTypes1=PL
+#ExtraSectionAddAverageRow1=0
+#ExtraSectionAddSumRow1=1
+#MaxNbOfExtra1=20
+#MinHitExtra1=1
+
+
+# There is also a global parameter ExtraTrackedRowsLimit that limits the
+# number of possible rows an ExtraSection can report. This parameter is
+# here to protect too much memory use when you make a bad setup in your
+# ExtraSection. It applies to all ExtraSection independently meaning that
+# none ExtraSection can report more rows than value defined by ExtraTrackedRowsLimit.
+# If you know an ExtraSection will report more rows than its value, you should
+# increase this parameter or AWStats will stop with an error.
+# Example: 2000
+# Default: 500
+#
+ExtraTrackedRowsLimit=500
+
+
+#-----------------------------------------------------------------------------
+# INCLUDES
+#-----------------------------------------------------------------------------
+
+# You can include other config files using the directive with the name of the
+# config file.
+# This is particularly useful for users who have a lot of virtual servers, so
+# a lot of config files and want to maintain common values in only one file.
+# Note that when a variable is defined both in a config file and in an
+# included file, AWStats will use the last value read for parameters that
+# contains one value and AWStats will concat all values from both files for
+# parameters that are lists of values.
+#
+
+#Include ""
+
diff --git a/modules/awstats/files/awstats.model.conf b/modules/awstats/files/awstats.model.conf
new file mode 100644
index 0000000..abe76e8
--- /dev/null
+++ b/modules/awstats/files/awstats.model.conf
@@ -0,0 +1,1499 @@
+# AWSTATS CONFIGURE FILE 6.6
+#-----------------------------------------------------------------------------
+# Copy this file into awstats.www.mydomain.conf and edit this new config file
+# to setup AWStats (See documentation in docs/ directory).
+# The config file must be in /etc/awstats, /usr/local/etc/awstats or /etc (for
+# Unix/Linux) or same directory than awstats.pl (Windows, Mac, Unix/Linux...)
+# To include an environment variable in any parameter (AWStats will replace
+# it with its value when reading it), follow the example:
+# Parameter="__ENVNAME__"
+# Note that environment variable AWSTATS_CURRENT_CONFIG is always defined with
+# the config value in an AWStats running session and can be used like others.
+#-----------------------------------------------------------------------------
+# $Revision: 1.327 $ - $Author: eldy $ - $Date: 2006/04/21 22:28:49 $
+
+
+
+#-----------------------------------------------------------------------------
+# MAIN SETUP SECTION (Required to make AWStats work)
+#-----------------------------------------------------------------------------
+
+# "LogFile" contains the web, ftp or mail server log file to analyze.
+# Possible values: A full path, or a relative path from awstats.pl directory.
+# Example: "/var/log/apache/access.log"
+# Example: "../logs/mycombinedlog.log"
+# You can also use tags in this filename if you need a dynamic file name
+# depending on date or time (Replacement is made by AWStats at the beginning
+# of its execution). This is available tags :
+#   %YYYY-n  is replaced with 4 digits year we were n hours ago
+#   %YY-n    is replaced with 2 digits year we were n hours ago
+#   %MM-n    is replaced with 2 digits month we were n hours ago
+#   %MO-n    is replaced with 3 letters month we were n hours ago
+#   %DD-n    is replaced with day we were n hours ago
+#   %HH-n    is replaced with hour we were n hours ago
+#   %NS-n    is replaced with number of seconds at 00:00 since 1970
+#   %WM-n    is replaced with the week number in month (1-5)
+#   %Wm-n    is replaced with the week number in month (0-4)
+#   %WY-n    is replaced with the week number in year (01-52)
+#   %Wy-n    is replaced with the week number in year (00-51)
+#   %DW-n    is replaced with the day number in week (1-7, 1=sunday)
+#                              use n=24 if you need (1-7, 1=monday)
+#   %Dw-n    is replaced with the day number in week (0-6, 0=sunday)
+#                              use n=24 if you need (0-6, 0=monday)
+#   Use 0 for n if you need current year, month, day, hour...
+# Example: "/var/log/access_log.%YYYY-0%MM-0%DD-0.log"
+# Example: "C:/WINNT/system32/LogFiles/W3SVC1/ex%YY-24%MM-24%DD-24.log"
+# You can also use a pipe if log file come from a pipe :
+# Example: "gzip -d </var/log/apache/access.log.gz |"
+# If there are several log files from load balancing servers :
+# Example: "/pathtotools/logresolvemerge.pl *.log |"
+#
+LogFile="/var/log/httpd/access_log"
+
+
+# Enter the log file type you want to analyze.
+# Possible values:
+#  W - For a web log file
+#  S - For a streaming log file
+#  M - For a mail log file
+#  F - For a ftp log file
+# Example: W
+# Default: W
+#
+LogType=W
+
+
+# Enter here your log format (Must match your web server config. See setup
+# instructions in documentation to know how to configure your web server to
+# have the required log format).
+# Possible values: 1,2,3,4 or "your_own_personalized_log_format"
+# 1 - Apache or Lotus Notes/Domino native combined log format (NCSA combined/XLF/ELF log format)
+# 2 - IIS or ISA format (IIS W3C log format). See FAQ-COM115 For ISA.
+# 3 - Webstar native log format.
+# 4 - Apache or Squid native common log format (NCSA common/CLF log format)
+#     With LogFormat=4, some features (browsers, os, keywords...) can't work.
+# "your_own_personalized_log_format" = If your log is ftp, mail or other format,
+#     you must use following keys to define the log format string (See FAQ for
+#     ftp, mail or exotic web log format examples):
+#   %host             Client hostname or IP address (or Sender host for mail log)
+#   %host_r           Receiver hostname or IP address (for mail log)
+#   %lognamequot      Authenticated login/user with format: "john"
+#   %logname          Authenticated login/user with format: john
+#   %time1            Date and time with format: [dd/mon/yyyy:hh:mm:ss +0000] or [dd/mon/yyyy:hh:mm:ss]
+#   %time2            Date and time with format: yyyy-mm-dd hh:mm:ss
+#   %time3            Date and time with format: Mon dd hh:mm:ss or Mon dd hh:mm:ss yyyy
+#   %time4            Date and time with unix timestamp format: dddddddddd
+#   %methodurl        Method and URL with format: "GET /index.html HTTP/x.x"
+#   %methodurlnoprot  Method and URL with format: "GET /index.html"
+#   %method           Method with format: GET
+#   %url              URL only with format: /index.html
+#   %query            Query string (used by URLWithQuery option)
+#   %code             Return code status (with format for web log: 999)
+#   %bytesd           Size of document in bytes
+#   %refererquot      Referer page with format: "http://from.com/from.htm"
+#   %referer          Referer page with format: http://from.com/from.htm
+#   %uabracket        User agent with format: [Mozilla/4.0 (compatible, ...)]
+#   %uaquot           User agent with format: "Mozilla/4.0 (compatible, ...)"
+#   %ua               User agent with format: Mozilla/4.0_(compatible...)
+#   %gzipin           mod_gzip compression input bytes: In:XXX
+#   %gzipout          mod_gzip compression output bytes & ratio: Out:YYY:ZZpct.
+#   %gzipratio        mod_gzip compression ratio: ZZpct.
+#   %deflateratio     mod_deflate compression ratio with format: (ZZ)
+#   %email            EMail sender (for mail log)
+#   %email_r          EMail receiver (for mail log)
+#   %virtualname      Web sever virtual hostname. Use this tag when same log
+#                     contains data of several virtual web servers. AWStats
+#                     will discard records not in SiteDomain nor HostAliases
+#   %cluster          If log file is provided from several computers (merged by
+#                     logresolvemerge.pl), use this to define cluster id field.
+#   %extraX           Another field that you plan to use for building a
+#                     personalized report with ExtraSection feature (See later).
+#   If your log format has some fields not included in this list, use:
+#   %other            Means another not used field
+#   %otherquot        Means another not used double quoted field
+#
+# Examples for Apache combined logs (following two examples are equivalent):
+# LogFormat = 1
+# LogFormat = "%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot"
+#
+# Example for IIS:
+# LogFormat = 2
+#
+LogFormat = " %host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot"
+
+
+# If your log field's separator is not a space, you can change this parameter.
+# This parameter is not used if LogFormat is a predefined value (1,2,3,4)
+# Backslash can be used as escape character.
+# Example: " "
+# Example: "\t"
+# Example: "\|"
+# Example: ","
+# Default: " "
+#
+LogSeparator=" "
+
+
+# "SiteDomain" must contain the main domain name, or the main intranet web
+# server name, used to reach the web site.
+# If you share the same log file for several virtual web servers, this
+# parameter is used to tell AWStats to filter record that contains records for
+# this virtual host name only (So check that this virtual hostname can be
+# found in your log file and use a personalized log format that include the
+# %virtualname tag).
+# But for multi hosting a better solution is to have one log file for each
+# virtual web server. In this case, this parameter is only used to generate
+# full URL's links when ShowLinksOnUrl option is set to 1.
+# If analyzing mail log, enter here the domain name of mail server.
+# Example: "myintranetserver"
+# Example: "www.domain.com"
+# Example: "ftp.domain.com"
+# Example: "domain.com"
+#
+SiteDomain="localhost.localdomain"
+
+
+# Enter here all other possible domain names, addresses or virtual host
+# aliases someone can use to access your site. Try to keep only the minimum
+# number of possible names/addresses to have the best performances.
+# You can repeat the "SiteDomain" value in this list.
+# This parameter is used to analyze referer field in log file and to help
+# AWStats to know if a referer URL is a local URL of same site or an URL of
+# another site.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Note: You can also use @/mypath/myfile if list of aliases are in a file.
+# Example: "www.myserver.com localhost 127.0.0.1 REGEX[mydomain\.(net|org)$]"
+#
+HostAliases="localhost 127.0.0.1"
+
+
+# If you want to have hosts reported by name instead of ip address, AWStats
+# need to make reverse DNS lookups (if not already done in your log file).
+# With DNSLookup to 0, all hosts will be reported by their IP addresses and
+# not by the full hostname of visitors (except if names are already available
+# in log file).
+# If you want/need to set DNSLookup to 1, don't forget that this will reduce
+# dramatically AWStats update process speed. Do not use on large web sites.
+# Note: Reverse DNS lookup is done on IPv4 only (Enable ipv6 plugin for IPv6).
+# Note: Result of DNS Lookup can be used to build the Country report. However
+# it is highly recommanded to enable the plugin 'geoipfree' or 'geoip' to
+# have an accurate Country report with no need of DNS Lookup.
+# Possible values:
+# 0 - No DNS Lookup
+# 1 - DNS Lookup is fully enabled
+# 2 - DNS Lookup is made only from static DNS cache file (if it exists)
+# Default: 2
+# 
+DNSLookup=2
+
+
+# When AWStats updates its statistics, it stores results of its analysis in 
+# files (AWStats database). All those files are written in the directory
+# defined by the "DirData" parameter. Set this value to the directory where
+# you want AWStats to save its database and working files into.
+# Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser"
+# feature (see later), you need "Write" permissions by web server user on this
+# directory (and "Modify" for Windows NTFS file systems).
+# Example: "/var/lib/awstats"
+# Example: "../data"
+# Example: "C:/awstats_data_dir"
+# Default: "."          (means same directory as awstats.pl)
+#
+DirData="/var/lib/awstats"
+
+
+# Relative or absolute web URL of your awstats cgi-bin directory.
+# This parameter is used only when AWStats is run from command line
+# with -output option (to generate links in HTML reported page).
+# Example: "/awstats"
+# Default: "/cgi-bin"   (means awstats.pl is in "/yourwwwroot/cgi-bin")
+#
+DirCgi="/awstats"
+
+
+# Relative or absolute web URL of your awstats icon directory.
+# If you build static reports ("... -output > outputpath/output.html"), enter
+# path of icon directory relative to the output directory 'outputpath'.
+# Example: "/awstatsicons"
+# Example: "../icon"
+# Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon")
+#
+DirIcons="/awstatsicons"
+
+
+# When this parameter is set to 1, AWStats adds a button on report page to
+# allow to "update" statistics from a web browser. Warning, when "update" is
+# made from a browser, AWStats is run as a CGI by the web server user defined
+# in your web server (user "nobody" by default with Apache, "IUSR_XXX" with
+# IIS), so the "DirData" directory and all already existing history files
+# awstatsMMYYYY[.xxx].txt must be writable by this user. Change permissions if
+# necessary to "Read/Write" (and "Modify" for Windows NTFS file systems).
+# Warning: Update process can be long so you might experience "time out"
+# browser errors if you don't launch AWStats frequently enough.
+# When set to 0, update is only made when AWStats is run from the command
+# line interface (or a task scheduler).
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowToUpdateStatsFromBrowser=0
+
+
+# AWStats saves and sorts its database on a month basis (except if using
+# databasebreak option from command line). 
+# However, if you choose the -month=all from command line or
+# value '-Year-' from CGI combo form to have a report for all year, AWStats
+# needs to reload all data for full year (each month), and sort them,
+# requiring a large amount of time, memory and CPU. This might be a problem
+# for web hosting providers that offer AWStats for large sites, on shared
+# servers, to non CPU cautious customers.
+# For this reason, the 'full year' is only enabled on Command Line by default.
+# You can change this by setting this parameter to 0, 1, 2 or 3.
+# Possible values:
+#  0 - Never allowed
+#  1 - Allowed on CLI only, -Year- value in combo is not visible
+#  2 - Allowed on CLI only, -Year- value in combo is visible but not allowed
+#  3 - Possible on CLI and CGI
+# Default: 2
+#
+AllowFullYearView=2
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When the update process runs, AWStats can set a lock file in TEMP or TMP
+# directory. This lock is to avoid to have 2 update processes running at the
+# same time to prevent unknown conflicts problems and avoid DoS attacks when
+# AllowToUpdateStatsFromBrowser is set to 1.
+# Because, when you use lock file, you can experience sometimes problems in
+# lock file not correctly removed (killed process for example requires that
+# you remove the file manualy), this option is not enabled by default (Do
+# not enable this option with no console server access).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+EnableLockForUpdate=1
+
+
+# AWStats can do reverse DNS lookups through a static DNS cache file that was
+# previously created manually. If no path is given in static DNS cache file
+# name, AWStats will search DirData directory. This file is never changed.
+# This option is not used if DNSLookup=0.
+# Note: DNS cache file format is 'minsince1970 ipaddress resolved_hostname'
+# or just 'ipaddress resolved_hostname'
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscache"
+# Default: "dnscache.txt"
+#
+DNSStaticCacheFile="dnscache.txt"
+
+
+# AWStats can do reverse DNS lookups through a DNS cache file that was created
+# by a previous run of AWStats. This file is erased and recreated after each
+# statistics update process. You don't need to create and/or edit it.
+# AWStats will read and save this file in DirData directory.
+# This option is used only if DNSLookup=1.
+# Note: If a DNSStaticCacheFile is available, AWStats will check for DNS
+# lookup in DNSLastUpdateCacheFile after checking into DNSStaticCacheFile.
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscachelastupdate"
+# Default: "dnscachelastupdate.txt"
+#
+DNSLastUpdateCacheFile="dnscachelastupdate.txt"
+
+
+# You can specify specific IP addresses that should NOT be looked up in DNS.
+# This option is used only if DNSLookup=1.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "123.123.123.123 REGEX[^192\.168\.]"
+# Default: ""
+#
+SkipDNSLookupFor=""
+
+
+# The following two parameters allow you to protect a config file from being
+# read by AWStats when called from a browser if web user has not been
+# authenticated. Your AWStats program must be in a web protected "realm" (With
+# Apache, you can use .htaccess files to do so. With other web servers, see
+# your server setup manual).
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowAccessFromWebToAuthenticatedUsersOnly=0
+
+
+# This parameter gives the list of all authorized authenticated users to view
+# statistics for this domain/config file. This parameter is used only if
+# AllowAccessFromWebToAuthenticatedUsersOnly is set to 1.
+# Change : Effective immediatly
+# Example: "user1 user2"
+# Example: "__REMOTE_USER__"
+# Default: ""
+#
+AllowAccessFromWebToFollowingAuthenticatedUsers=""
+
+
+# When this parameter is defined to something, the IP address of the user that
+# reads its statistics from a browser (when AWStats is used as a CGI) is
+# checked and must match one of the IP address values or ranges.
+# Change : Effective immediatly
+# Example: "127.0.0.1 123.123.123.1-123.123.123.255"
+# Default: ""
+#
+AllowAccessFromWebToFollowingIPAddresses=""
+
+
+# If the "DirData" directory (see above) does not exist, AWStats return an
+# error. However, you can ask AWStats to create it.
+# This option can be used by some Web Hosting Providers that has defined a 
+# dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and
+# don't want to have to create a new directory each time they add a new user.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+CreateDirDataIfNotExists=0
+
+
+# You can choose in which format the Awstats history database is saved.
+# Note: Using "xml" format make AWStats building database files three times
+# larger than using "text" format.
+# Change : Database format is switched after next update
+# Possible values: text or xml
+# Default: text
+#
+BuildHistoryFormat=text
+
+
+# If you prefer having the report output pages be built as XML compliant pages
+# instead of simple HTML pages, you can set this to 'xhtml' (May not work
+# properly with old browsers).
+# Change : Effective immediatly
+# Possible values: html or xhtml
+# Default: html
+#
+BuildReportFormat=html
+
+
+# AWStats databases can be updated from command line of from a browser (when
+# used as a cgi program). So AWStats database files need write permission
+# for both command line user and default web server user (nobody for Unix,
+# IUSR_xxx for IIS/Windows,...).
+# To avoid permission problems between update process (run by an admin user)
+# and CGI process (ran by a low level user), AWStats can save its database 
+# files with read and write permissions for everyone.
+# By default, AWStats keeps default user permissions on updated files. If you 
+# set AllowToUpdateStatsFromBrowser to 1, you can change this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+SaveDatabaseFilesWithPermissionsForEveryone=0
+
+
+# AWStats can purge log file, after analyzing it. Note that AWStats is able
+# to detect new lines in a log file, to process only them, so you can launch
+# AWStats as often as you want, even with this parameter to 0.
+# With 0, no purge is made, so you must use a scheduled task or a web server
+# that make this purge frequently.
+# With 1, the purge of the log file is made each time AWStats update is run.
+# This parameter doesn't work with IIS (This web server doesn't let its log
+# file to be purged).
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+PurgeLogFile=0
+
+
+# When PurgeLogFile is setup to 1, AWStats will clean your log file after
+# processing it. You can however keep an archive file of all processed log
+# records by setting this parameter (For example if you want to use another
+# log analyzer). The archived log file is saved in "DirData" with name
+# awstats_archive.configname[.suffix].log
+# This parameter is not used if PurgeLogFile=0
+# Change : Effective for new updates only
+# Possible values: 0, 1, or tags (See LogFile parameter) for suffix
+# Example: 1
+# Example: %YYYY%MM%DD
+# Default: 0
+#
+ArchiveLogRecords=0
+
+
+# Each time you run the update process, AWStats overwrites the 'historic file'
+# for the month (awstatsMMYYYY[.*].txt) with the updated one.
+# When write errors occurs (IO, disk full,...), this historic file can be
+# corrupted and must be deleted. Because this file contains information of all
+# past processed log files, you will loose old stats if removed. So you can
+# ask AWStats to save last non corrupted file in a .bak file. This file is
+# stored in "DirData" directory with other 'historic files'.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+KeepBackupOfHistoricFiles=0
+
+
+# Default index page name for your web server.
+# Change : Effective for new updates only
+# Example: "index.php index.html default.html"
+# Default: "index.html"
+#
+DefaultFile="index.html"
+
+
+# Do not include access from clients that match following criteria.
+# If your log file contains IP addresses in host field, you must enter here
+# matching IP addresses criteria.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "SkipHosts" is "OnlyHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Example: "localhost REGEX[^.*\.localdomain$]"
+# Default: ""
+#
+SkipHosts="127.0.0.1"
+
+
+# Do not include access from clients with a user agent that match following
+# criteria. If you want to exclude a robot, you should update the robots.pm
+# file instead of this parameter.
+# The opposite parameter of "SkipUserAgents" is "OnlyUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "konqueror REGEX[ua_test_v\d\.\d]"
+# Default: ""
+#
+SkipUserAgents=""
+
+
+# Use SkipFiles to ignore access to URLs that match one of following entries.
+# You can enter a list of not important URLs (like framed menus, hidden pages,
+# etc...) to exclude them from statistics. You must enter here exact relative
+# URL as found in log file, or a matching REGEX value. Check apply on URL with
+# all its query paramaters.
+# For example, to ignore /badpage.php, just add "/badpage.php". To ignore all
+# pages in a particular directory, add "REGEX[^\/directorytoexclude]".
+# The opposite parameter of "SkipFiles" is "OnlyFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "/badpage.php /page.php?param=x REGEX[^\/excludedirectory]"
+# Default: ""
+#
+SkipFiles=""
+
+
+# Use SkipReferrersBlackList if you want to exclude records coming from a SPAM
+# referrer. Parameter must receive a local file name containing rules applied
+# on referrer field. If parameter is empty, no filter is applied.
+# An example of such a file is available in lib/blacklist.txt
+# You can download updated version at http://www.jayallen.org/comment_spam/
+# Change : Effective for new updates only
+# Example: "/mylibpath/blacklist.txt"
+# Default: ""
+#
+# WARNING!! Using this feature make AWStats running very slower (5 times slower
+# with black list file provided with AWStats !
+#
+SkipReferrersBlackList=""
+
+
+# Include in stats, only accesses from hosts that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular hosts, you can add those host names in
+# this parameter.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "OnlyHosts" is "SkipHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Default: ""
+#
+OnlyHosts=""
+
+
+# Include in stats, only accesses from user agent that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular browsers, you can add their user agents
+# string in this parameter.
+# The opposite parameter of "OnlyUserAgents" is "SkipUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "msie"
+# Default: ""
+#
+OnlyUserAgents=""
+
+
+# Include in stats, only accesses to URLs that match one of following entries.
+# For example, if you want AWStats to filter access to keep only stats that
+# match a particular string, like a particular directory, you can add this
+# directory name in this parameter.
+# The opposite parameter of "OnlyFiles" is "SkipFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "REGEX[marketing_directory] REGEX[office\/.*\.(csv|sxw)$]"
+# Default: ""
+#
+OnlyFiles=""
+
+
+# Add here a list of kind of url (file extension) that must be counted as
+# "Hit only" and not as a "Hit" and "Page/Download". You can set here all
+# image extensions as they are hit downloaded that must be counted but they
+# are not viewed pages. URLs with such extensions are not included in the TOP
+# Pages/URL report.
+# Note: If you want to exclude particular URLs from stats (No Pages and no
+# Hits reported), you must use SkipFiles parameter.
+# Change : Effective for new updates only
+# Example: "css js class gif jpg jpeg png bmp ico zip arj gz z wav mp3 wma mpg"
+# Example: ""
+# Default: "css js class gif jpg jpeg png bmp ico"
+#
+NotPageList="css js class gif jpg jpeg png bmp ico swf"
+
+
+# By default, AWStats considers that records found in web log file are
+# successful hits if HTTP code returned by server is a valid HTTP code (200
+# and 304). Any other code are reported in HTTP status chart.
+# Note that HTTP 'control codes', like redirection (302, 305) are not added by
+# default in this list as they are not pages seen by a visitor but are
+# protocol exchange codes to tell the browser to ask another page. Because
+# this other page will be counted and seen with a 200 or 304 code, if you 
+# add such codes, you will have 2 pages viewed reported for only one in facts.
+# Change : Effective for new updates only
+# Example: "200 304 302 305"
+# Default: "200 304"
+#
+ValidHTTPCodes="200 304"
+
+
+# By default, AWStats considers that records found in mail log file are
+# successful mail transfers if field that represent return code in analyzed
+# log file match values defined by this parameter.
+# Change : Effective for new updates only
+# Example: "1 250 200"
+# Default: "1 250"
+#
+ValidSMTPCodes="1 250"
+
+
+# Some web servers on some Operating systems (IIS-Windows) consider that a
+# login with same value but different case are the same login. To tell AWStats
+# to also consider them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+AuthenticatedUsersNotCaseSensitive=0
+
+
+# Some web servers on some Operating systems (IIS-Windows) considers that two
+# URLs with same value but different case are the same URL. To tell AWStats to
+# also considers them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+# 
+URLNotCaseSensitive=0
+
+
+# Keep or remove the anchor string you can find in some URLs.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+URLWithAnchor=0
+
+
+# In URL links, "?" char is used to add parameter's list in URLs. Syntax is:
+# /mypage.html?param1=value1&param2=value2
+# However, some servers/sites use also other chars to isolate dynamic part of
+# their URLs. You can complete this list with all such characters.
+# Change : Effective for new updates only
+# Example: "?;,"
+# Default: "?;"
+#
+URLQuerySeparators="?;"
+
+
+# Keep or remove the query string to the URL in the statistics for individual
+# pages. This is primarily used to differentiate between the URLs of dynamic
+# pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as two
+# different pages.
+# Warning, when set to 1, memory required to run AWStats is dramatically
+# increased if you have a lot of changing URLs (for example URLs with a random
+# id inside). Such web sites should not set this option to 1 or use seriously
+# the next parameter URLWithQueryWithOnlyFollowingParameters (or eventually 
+# URLWithQueryWithoutFollowingParameters).
+# Change : Effective for new updates only
+# Possible values:
+# 0 - URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used     (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLWithQuery=0
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to keep only parameters
+# you need (if you know them) before counting, manipulating and storing URL.
+# Enter here list of wanted parameters. For example, with "param", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithoutFollowingParameters.
+# Change : Effective for new updates only
+# Example: "param"
+# Default: ""
+# 
+URLWithQueryWithOnlyFollowingParameters=""
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to remove such parameters
+# from the URL before counting, manipulating and storing URL. Enter here list
+# of all non wanted parameters. For example if you enter "id", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithOnlyFollowingParameters.
+# Change : Effective for new updates only
+# Example: "PHPSESSID jsessionid"
+# Default: ""
+# 
+URLWithQueryWithoutFollowingParameters=""
+
+
+# Keep or remove the query string to the referrer URL in the statistics for
+# external referrer pages. This is used to differentiate between the URLs of
+# dynamic referrer pages. If set to 1, mypage.html?id=x and mypage.html?id=y
+# are counted as two different referrer pages.
+# Change : Effective for new updates only
+# Possible values:
+# 0 - Referrer URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used      (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+# 
+URLReferrerWithQuery=0
+
+
+# AWStats can detect setup problems or show you important informations to have
+# a better use. Keep this to 1, except if AWStats says you can change it.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 1
+#
+WarningMessages=1
+
+
+# When an error occurs, AWStats outputs a message related to errors. If you
+# want (in most cases for security reasons) to have no error messages, you
+# can set this parameter to your personalized generic message.
+# Change : Effective immediatly
+# Example: "An error occurred. Contact your Administrator"
+# Default: ""
+#
+ErrorMessages=""
+
+
+# AWStat can be run with debug=x parameter to output various informations
+# to help in debugging or solving troubles. If you want to allow this (not
+# enabled by default for security reasons), set this parameter to 0.
+# Change : Effective immediatly
+# Possible values: 0 or 1
+# Default: 0
+#
+DebugMessages=0
+
+
+# To help you to detect if your log format is good, AWStats reports an error
+# if all the first NbOfLinesForCorruptedLog lines have a format that does not
+# match the LogFormat parameter.
+# However, some worm virus attack on your web server can result in a very high
+# number of corrupted lines in your log. So if you experience awstats stop
+# because of bad virus records at the beginning of your log file, you can
+# increase this parameter (very rare).
+# Change : Effective for new updates only
+# Default: 50
+#
+NbOfLinesForCorruptedLog=50
+
+
+# For some particular integration needs, you may want to have CGI links to
+# point to another script than awstats.pl.
+# Use the name of this script in WrapperScript parameter.
+# Change : Effective immediatly
+# Example: "awstatslauncher.pl"
+# Default: ""
+#
+WrapperScript=""
+
+
+# DecodeUA must be set to 1 if you use Roxen web server. This server converts
+# all spaces in user agent field into %20. This make the AWStats robots, OS
+# and browsers detection fail in some cases. Just change it to 1 if and only
+# if your web server is Roxen.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+DecodeUA=0
+
+
+# MiscTrackerUrl can be used to make AWStats able to detect some miscellaneous
+# things, that can not be tracked on other way, like:
+# - Javascript disabled
+# - Java enabled
+# - Screen size
+# - Color depth
+# - Macromedia Director plugin
+# - Macromedia Shockwave plugin
+# - Realplayer G2 plugin
+# - QuickTime plugin
+# - Mediaplayer plugin
+# - Acrobat PDF plugin
+# To enable all these features, you must copy the awstats_misc_tracker.js file
+# into a /js/ directory stored in your web document root and add the following
+# HTML code at the end of your index page (but before </BODY>) :
+#
+# <script language=javascript src="/js/awstats_misc_tracker.js"></script>
+# <noscript><img src="/js/awstats_misc_tracker.js?nojs=y" height=0 width=0 border=0 style="display: none"></noscript>
+#
+# If code is not added in index page, all those detection capabilities will be
+# disabled. You must also check that ShowScreenSizeStats and ShowMiscStats
+# parameters are set to 1 to make results appear in AWStats report page.
+# If you want to use another directory than /js/, you must also change the
+# awstatsmisctrackerurl variable into the awstats_misc_tracker.js file.
+# Change : Effective for new updates only.
+# Possible value: URL of javascript tracker file added in your HTML code.
+# Default: "/js/awstats_misc_tracker.js"
+#
+MiscTrackerUrl="/js/awstats_misc_tracker.js"
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# The following values allow you to define accuracy of AWStats entities
+# (robots, browsers, os, referers, file types) detection.
+# It might be a good idea for large web sites or ISP that provides AWStats to
+# high number of customers, to set this parameter to 1 (or 0), instead of 2.
+# Possible values:
+#    0      = No detection,
+#    1      = Medium/Standard detection
+#    2      = Full detection
+# Change : Effective for new updates only
+# Note   : LevelForBrowsersDetection can also accept value "allphones". This
+#          enable detailed detection of phone/pda browsers.
+# Default: 2 (0 for LevelForWormsDetection)
+#
+LevelForBrowsersDetection=2         # 0 disables Browsers detection.
+                                    # 2 reduces AWStats speed by 2%
+                                    # allphones reduces AWStats speed by 5%
+LevelForOSDetection=2               # 0 disables OS detection.
+                                    # 2 reduces AWStats speed by 3%
+LevelForRefererAnalyze=2            # 0 disables Origin detection.
+                                    # 2 reduces AWStats speed by 14%
+LevelForRobotsDetection=2           # 0 disables Robots detection.
+                                    # 2 reduces AWStats speed by 2.5%
+LevelForSearchEnginesDetection=2    # 0 disables Search engines detection.
+                                    # 2 reduces AWStats speed by 9%
+LevelForKeywordsDetection=2         # 0 disables Keyphrases/Keywords detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForFileTypesDetection=2        # 0 disables File types detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForWormsDetection=0            # 0 disables Worms detection.
+                                    # 2 reduces AWStats speed by 15%
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When you use AWStats as a CGI, you can have the reports shown in HTML frames.
+# Frames are only available for report viewed dynamically. When you build
+# pages from command line, this option is not used and no frames are built.
+# Possible values: 0 or 1
+# Default: 1
+#
+UseFramesWhenCGI=1
+
+
+# This parameter asks your browser to open detailed reports into a different
+# window than the main page.
+# Possible values:
+# 0 - Open all in same browser window
+# 1 - Open detailed reports in another window except if using frames
+# 2 - Open always in a different window even if reports are framed
+# Default: 1
+#
+DetailedReportsOnNewWindows=1
+
+
+# You can add, in the HTML report page, a cache lifetime (in seconds) that
+# will be returned to the browser in HTTP header answer by server.
+# This parameter is not used when reports are built with -staticlinks option.
+# Example: 3600
+# Default: 0
+#
+Expires=3600
+
+
+# To avoid too large web pages, you can ask AWStats to limit number of rows of
+# all reported charts to this number when no other limits apply.
+# Default: 1000
+#
+MaxRowsInHTMLOutput=1000
+
+
+# Set your primary language (ISO-639-1 language codes).
+# Possible values:
+#  Albanian=al, Bosnian=ba, Bulgarian=bg, Catalan=ca,
+#  Chinese (Taiwan)=tw, Chinese (Simpliefied)=cn, Croatian=hr, Czech=cz,
+#  Danish=dk, Dutch=nl, English=en, Estonian=et, Euskara=eu, Finnish=fi,
+#  French=fr, Galician=gl, German=de, Greek=gr, Hebrew=he, Hungarian=hu,
+#  Icelandic=is, Indonesian=id, Italian=it, Japanese=jp, Korean=ko,
+#  Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl,
+#  Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru,
+#  Serbian=sr, Slovak=sk, Slovenian=si, Spanish=es, Swedish=se, Turkish=tr,
+#  Ukrainian=ua, Welsh=cy.
+#  First available language accepted by browser=auto
+# Default: "auto"
+#
+Lang="auto"
+
+
+# Set the location of language files.
+# Example: "/usr/share/awstats/lang"
+# Default: "./lang" (means lang directory is in same location than awstats.pl)
+#
+DirLang="./lang"
+
+
+# Show menu header with reports' links
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowMenu=1					
+
+
+# You choose here which reports you want to see in the main page and what you
+# want to see in those reports.
+# Possible values:
+#  0  - Report is not shown at all
+#  1  - Report is shown in main page with an entry in menu and default columns
+# XYZ - Report shows column informations defined by code X,Y,Z...
+#       X,Y,Z... are code letters among the following:
+#        U = Unique visitors
+#        V = Visits
+#        P = Number of pages
+#        H = Number of hits (or mails)
+#        B = Bandwith (or total mail size for mail logs)
+#        L = Last access date
+#        E = Entry pages
+#        X = Exit pages
+#        C = Web compression (mod_gzip,mod_deflate)
+#        M = Average mail size (mail logs)
+#
+
+# Show monthly summary
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowSummary=UVPHB
+
+# Show monthly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowMonthStats=UVPHB
+
+# Show days of month chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: VPHB, Possible column codes: VPHB
+ShowDaysOfMonthStats=VPHB
+
+# Show days of week chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDaysOfWeekStats=PHB
+
+# Show hourly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowHoursStats=PHB
+
+# Show domains/country chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDomainsStats=PHB
+
+# Show hosts chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHBL, Possible column codes: PHBL
+ShowHostsStats=PHBL
+
+# Show authenticated users chart
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHBL
+ShowAuthenticatedUsers=0
+
+# Show robots chart
+# Context: Web, Streaming
+# Default: HBL, Possible column codes: HBL
+ShowRobotsStats=HBL
+
+# Show worms chart
+# Context: Web, Streaming
+# Default: 0 (If set to other than 0, see also LevelForWormsDetection), Possible column codes: HBL
+ShowWormsStats=0
+
+# Show email senders chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailSenders=0
+
+# Show email receivers chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailReceivers=0
+
+# Show session chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowSessionsStats=1
+
+# Show pages-url chart.
+# Context: Web, Streaming, Ftp
+# Default: PBEX, Possible column codes: PBEX
+ShowPagesStats=PBEX
+
+# Show file types chart.
+# Context: Web, Streaming, Ftp
+# Default: HB, Possible column codes: HBC
+ShowFileTypesStats=HB
+
+# Show file size chart (Not yet available)
+# Context: Web, Streaming, Mail, Ftp
+# Default: 1, Possible column codes: None
+ShowFileSizesStats=0		
+
+# Show operating systems chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowOSStats=1
+
+# Show browsers chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowBrowsersStats=1
+
+# Show screen size chart
+# Context: Web, Streaming
+# Default: 0 (If set to 1, see also MiscTrackerUrl), Possible column codes: None
+ShowScreenSizeStats=0
+
+# Show origin chart
+# Context: Web, Streaming
+# Default: PH, Possible column codes: PH
+ShowOriginStats=PH
+
+# Show keyphrases chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeyphrasesStats=1
+
+# Show keywords chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeywordsStats=1
+
+# Show misc chart
+# Context: Web, Streaming
+# Default: a (See also MiscTrackerUrl parameter), Possible column codes: anjdfrqwp
+ShowMiscStats=a
+
+# Show http errors chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowHTTPErrorsStats=1
+
+# Show smtp errors chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: None
+ShowSMTPErrorsStats=0
+
+# Show the cluster report (Your LogFormat must contains the %cluster tag)
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHB
+ShowClusterStats=0
+
+
+# Some graphical reports are followed by the data array of values.
+# If you don't want this array (to reduce the report size for example), you
+# can set thoose options to 0.
+# Possible values: 0 or 1
+# Default: 1
+#
+# Data array values for the ShowMonthStats report
+AddDataArrayMonthStats=1
+# Data array values for the ShowDaysOfMonthStats report
+AddDataArrayShowDaysOfMonthStats=1
+# Data array values for the ShowDaysOfWeekStats report
+AddDataArrayShowDaysOfWeekStats=1
+# Data array values for the ShowHoursStats report
+AddDataArrayShowHoursStats=1
+
+
+# In the Origin chart, you have stats on where your hits came from. You can
+# include hits on pages that come from pages of same sites in this chart.
+# Possible values: 0 or 1
+# Default: 0
+#
+IncludeInternalLinksInOriginSection=0
+
+
+# The following parameters can be used to choose the maximum number of lines
+# shown for the particular following reports.
+#
+# Stats by countries/domains
+MaxNbOfDomain = 10
+MinHitDomain  = 1
+# Stats by hosts
+MaxNbOfHostsShown = 10
+MinHitHost    = 1
+# Stats by authenticated users
+MaxNbOfLoginShown = 10
+MinHitLogin   = 1
+# Stats by robots
+MaxNbOfRobotShown = 10
+MinHitRobot   = 1
+# Stats by pages
+MaxNbOfPageShown = 10
+MinHitFile    = 1
+# Stats by OS
+MaxNbOfOsShown = 10
+MinHitOs      = 1
+# Stats by browsers
+MaxNbOfBrowsersShown = 10
+MinHitBrowser = 1
+# Stats by screen size
+MaxNbOfScreenSizesShown = 5
+MinHitScreenSize = 1
+# Stats by window size (following 2 parameters are not yet used)
+MaxNbOfWindowSizesShown = 5
+MinHitWindowSize = 1
+# Stats by referers
+MaxNbOfRefererShown = 10
+MinHitRefer   = 1
+# Stats for keyphrases
+MaxNbOfKeyphrasesShown = 10
+MinHitKeyphrase = 1
+# Stats for keywords
+MaxNbOfKeywordsShown = 10
+MinHitKeyword = 1
+# Stats for sender or receiver emails
+MaxNbOfEMailsShown = 20
+MinHitEMail   = 1
+
+
+# Choose if you want the week report to start on sunday or monday
+# Possible values:
+# 0 - Week starts on sunday
+# 1 - Week starts on monday
+# Default: 1
+#
+FirstDayOfWeek=1
+
+
+# List of visible flags that link to other language translations.
+# See Lang parameter for list of allowed flag/language codes.
+# If you don't want any flag link, set ShowFlagLinks to "".
+# This parameter is used only if ShowMenu parameter is set to 1.
+# Possible values: "" or "language_codes_separated_by_space"
+# Example: "en es fr nl de"
+# Default: ""
+#
+ShowFlagLinks=""
+
+
+# Each URL, shown in stats report views, are links you can click.
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowLinksOnUrl=1
+
+
+# When AWStats builds HTML links in its report pages, it starts those links
+# with "http://". However some links might be HTTPS links, so you can enter
+# here the root of all your HTTPS links. If all your site is a SSL web site,
+# just enter "/".
+# This parameter is not used if ShowLinksOnUrl is 0.
+# Example: "/shopping"
+# Example: "/"
+# Default: ""
+#
+UseHTTPSLinkForUrl=""
+
+
+# Maximum length of URL part shown on stats page (number of characters).
+# This affects only URL visible text, links still work.
+# Default: 64
+#
+MaxLengthOfShownURL=64
+
+
+# You can enter HTML code that will be added at the top of AWStats reports.
+# Default: ""
+#
+HTMLHeadSection=""
+
+
+# You can enter HTML code that will be added at the end of AWStats reports.
+# Great to add advert ban.
+# Default: ""
+#
+HTMLEndSection=""
+
+
+# You can set Logo and LogoLink to use your own logo.
+# Logo must be the name of image file (must be in $DirIcons/other directory).
+# LogoLink is the expected URL when clicking on Logo.
+# Default: "awstats_logo6.png"
+#
+Logo="awstats_logo6.png"
+LogoLink="http://awstats.sourceforge.net"
+
+
+# Value of maximum bar width/height for horizontal/vertical HTML graphics bars.
+# Default: 260/90
+#
+BarWidth   = 260
+BarHeight  = 90
+
+
+# You can ask AWStats to use a particular CSS (Cascading Style Sheet) to
+# change its look. To create a style sheet, you can use samples provided with
+# AWStats in wwwroot/css directory.
+# Example: "/awstatscss/awstats_bw.css"
+# Example: "/css/awstats_bw.css"
+# Default: ""
+#
+StyleSheet=""
+
+
+# Those color parameters can be used (if StyleSheet parameter is not used)
+# to change AWStats look.
+# Example: color_name="RRGGBB"	# RRGGBB is Red Green Blue components in Hex
+#
+color_Background="FFFFFF"		# Background color for main page (Default = "FFFFFF")
+color_TableBGTitle="CCCCDD"		# Background color for table title (Default = "CCCCDD")
+color_TableTitle="000000"		# Table title font color (Default = "000000")
+color_TableBG="CCCCDD"			# Background color for table (Default = "CCCCDD")
+color_TableRowTitle="FFFFFF"	# Table row title font color (Default = "FFFFFF")
+color_TableBGRowTitle="ECECEC"	# Background color for row title (Default = "ECECEC")
+color_TableBorder="ECECEC"		# Table border color (Default = "ECECEC")
+color_text="000000"				# Color of text (Default = "000000")
+color_textpercent="606060"		# Color of text for percent values (Default = "606060")
+color_titletext="000000"		# Color of text title within colored Title Rows (Default = "000000")
+color_weekend="EAEAEA"			# Color for week-end days (Default = "EAEAEA")
+color_link="0011BB"				# Color of HTML links (Default = "0011BB")
+color_hover="605040"			# Color of HTML on-mouseover links (Default = "605040") 
+color_u="FFAA66"				# Background color for number of unique visitors (Default = "FFAA66")
+color_v="F4F090"				# Background color for number of visites (Default = "F4F090")
+color_p="4477DD"				# Background color for number of pages (Default = "4477DD")
+color_h="66DDEE"				# Background color for number of hits (Default = "66DDEE")
+color_k="2EA495"				# Background color for number of bytes (Default = "2EA495")
+color_s="8888DD"				# Background color for number of search (Default = "8888DD")
+color_e="CEC2E8"				# Background color for number of entry pages (Default = "CEC2E8")
+color_x="C1B2E2"				# Background color for number of exit pages (Default = "C1B2E2")
+
+
+
+#-----------------------------------------------------------------------------
+# PLUGINS
+#-----------------------------------------------------------------------------
+
+# Add here all plugin files you want to load.
+# Plugin files must be .pm files stored in 'plugins' directory.
+# Uncomment LoadPlugin lines to enable a plugin after checking that perl
+# modules required by the plugin are installed.
+
+# Plugin: Tooltips
+# Perl modules required: None
+# Add some tooltips help on HTML report pages.
+# Note that enabling this kind of help will increased HTML report pages size,
+# so server load and bandwidth.
+#
+LoadPlugin="tooltips"
+
+# Plugin: DecodeUTFKeys
+# Perl modules required: Encode and URI::Escape
+# Allow AWStats to show correctly (in language charset) keywords/keyphrases
+# strings even if they were UTF8 coded by the referer search engine.
+#
+#LoadPlugin="decodeutfkeys"
+
+# Plugin: IPv6
+# Perl modules required: Net::IP and Net::DNS
+# This plugin gives AWStats capability to make reverse DNS lookup on IPv6
+# addresses.
+# Note: If you are interested in having country report, you should use the
+# geoipfree or geoip plugin instead of enabled reverse DNS lookup.
+#
+#LoadPlugin="ipv6"
+
+# Plugin: HashFiles
+# Perl modules required: Storable
+# AWStats DNS cache files are read/saved as native hash files. This increases
+# DNS cache files loading speed, above all for very large web sites.
+#
+LoadPlugin="hashfiles"
+
+# Plugin: GeoIP
+# Perl modules required: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IP module 
+# from Maxmind, database more up to date) or the GeoIPfree plugin (need
+# Perl Geo::IPfree module, database less up to date).
+# This plugin reduces AWStats speed of 8% !
+#
+LoadPlugin="geoip GEOIP_STANDARD /usr/share/GeoIP/GeoIP.dat"
+
+# Plugin: GeoIPfree
+# Perl modules required: Geo::IPfree version 0.2+ (from Graciliano M.P.)
+# Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IPfree
+# module, database less up to date) or the GeoIP plugin (need Perl Geo::IP
+# module from Maxmind, database more up to date).
+# Note: Activestate provide a corrupted version of Geo::IPfree 0.2 Perl
+# module, so install it from elsewhere (from www.cpan.org for example).
+# This plugin reduces AWStats speed of 10% !
+#
+#LoadPlugin="geoipfree"
+
+# Plugin: GeoIP_Region_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by regions. Only regions for US and 
+# Canada can be detected.
+# Note: This plugin need Maxmind GeoIP Perl module AND the region database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Region database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_region_maxmind GEOIP_STANDARD /pathto/GeoIPRegion.dat"
+
+# Plugin: GeoIP_City_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by cities (with country and regions
+# informations for major countries).
+# Note: This plugin need Maxmind GeoIP Perl module AND the city database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the City database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /pathto/GeoIPCity.dat"
+
+# Plugin: GeoIP_ISP_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by ISP.
+# Note: This plugin need Maxmind GeoIP Perl module AND the ISP database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the ISP database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_isp_maxmind GEOIP_STANDARD /pathto/GeoIPISP.dat"
+
+# Plugin: GeoIP_Org_Maxmind
+# Perl modules required: Geo::IP (from Maxmind)
+# This plugin add a chart of hits by Organization name
+# Note: This plugin need Maxmind GeoIP Perl module AND the Org database.
+# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
+# on Windows but it works great on Linux with default Perl.
+# You need to purchase a license from Maxmind to get/use the Org database.
+# This plugin reduces AWStats speed.
+#
+#LoadPlugin="geoip_org_maxmind GEOIP_STANDARD /pathto/GeoIPOrg.dat"
+
+# Plugin: UserInfo
+# Perl modules required: None
+# Add a text (Firtname, Lastname, Office Department, ...) in authenticated user
+# reports for each login value.
+# A text file called userinfo.myconfig.txt, with two fields (first is login,
+# second is text to show, separated by a tab char) must be created in DirData
+# directory.
+#
+#LoadPlugin="userinfo"
+
+# Plugin: HostInfo
+# Perl modules required: Net::XWhois
+# Add a column into host chart with a link to open a popup window that shows
+# info on host (like whois records).
+#
+#LoadPlugin="hostinfo"
+
+# Plugin: ClusterInfo
+# Perl modules required: None
+# Add a text (for example a full hostname) in cluster reports for each cluster
+# number.
+# A text file called clusterinfo.myconfig.txt, with two fields (first is
+# cluster number, second is text to show) separated by a tab char. must be
+# created into DirData directory.
+# Note this plugin is useless if ShowClusterStats is set to 0 or if you don't
+# use a personalized log format that contains %cluster tag.
+#
+#LoadPlugin="clusterinfo"
+
+# Plugin: UrlAliases
+# Perl modules required: None
+# Add a text (Page title, description...) in URL reports before URL value.
+# A text file called urlalias.myconfig.txt, with two fields (first is URL,
+# second is text to show, separated by a tab char) must be created into
+# DirData directory.
+#
+#LoadPlugin="urlalias"
+
+# Plugin: TimeHiRes
+# Perl modules required: Time::HiRes (if Perl < 5.8)
+# Time reported by -showsteps option is in millisecond. For debug purpose.
+#
+#LoadPlugin="timehires"		
+
+# Plugin: TimeZone
+# Perl modules required: Time::Local
+# Allow AWStats to correct a bad timezone for user of some IIS that use
+# GMT date in its log instead of local server time.
+# This module is useless for Apache and most IIS version.
+# This plugin reduces AWStats speed of 40% !!!!!!!
+#
+#LoadPlugin="timezone +2"
+
+# Plugin: Rawlog
+# Perl modules required: None
+# This plugin adds a form in AWStats main page to allow users to see raw
+# content of current log files. A filter is also available.
+#
+#LoadPlugin="rawlog"
+
+# Plugin: GraphApplet
+# Perl modules required: None
+# Supported charts are built by a 3D graphic applet.
+#
+#LoadPlugin="graphapplet /awstatsclasses"				# EXPERIMENTAL FEATURE
+
+
+
+#-----------------------------------------------------------------------------
+# EXTRA SECTIONS
+#-----------------------------------------------------------------------------
+
+# You can define your own charts, you choose here what are rows and columns
+# keys. This feature is particularly useful for marketing purpose, tracking
+# products orders for example.
+# For this, edit all parameters of Extra section. Each set of parameter is a
+# different chart. For several charts, duplicate section changing the number.
+# Note: Each Extra section reduces AWStats speed by 8%.
+#
+# WARNING: A wrong setup of Extra section might result in too large arrays
+# that will consume all your memory, making AWStats unusable after several
+# updates, so be sure to setup it correctly.
+# In most cases, you don't need this feature.
+#
+# ExtraSectionNameX is title of your personalized chart.
+# ExtraSectionCodeFilterX is list of codes the record code field must match.
+#   Put an empty string for no test on code.
+# ExtraSectionConditionX are conditions you can use to count or not the hit,
+#   Use one of the field condition
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,extraX)
+#   and a regex to match, after a coma. Use "||" for "OR".
+# ExtraSectionFirstColumnTitleX is the first column title of the chart.
+# ExtraSectionFirstColumnValuesX is a string to tell AWStats which field to
+#   extract value from
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOST,VHOST,extraX)
+#   and how to extract the value (using regex syntax). Each different value
+#   found will appear in first column of report on a different row. Be sure
+#   that list of different possible values will not grow indefinitely.
+# ExtraSectionFirstColumnFormatX is the string used to write value.
+# ExtraSectionStatTypesX are things you want to count. You can use standard
+#   code letters (P for pages,H for hits,B for bandwidth,L for last access).
+# ExtraSectionAddAverageRowX add a row at bottom of chart with average values.
+# ExtraSectionAddSumRowX add a row at bottom of chart with sum values.
+# MaxNbOfExtraX is maximum number of rows shown in chart.
+# MinHitExtraX is minimum number of hits required to be shown in chart.
+#
+
+# Example to report the 20 products the most ordered by "order.cgi" script
+#ExtraSectionName1="Product orders"
+#ExtraSectionCodeFilter1="200 304"
+#ExtraSectionCondition1="URL,\/cgi\-bin\/order\.cgi||URL,\/cgi\-bin\/order2\.cgi"
+#ExtraSectionFirstColumnTitle1="Product ID"
+#ExtraSectionFirstColumnValues1="QUERY_STRING,productid=([^&]+)"
+#ExtraSectionFirstColumnFormat1="%s"
+#ExtraSectionStatTypes1=PL
+#ExtraSectionAddAverageRow1=0
+#ExtraSectionAddSumRow1=1
+#MaxNbOfExtra1=20
+#MinHitExtra1=1
+
+
+# There is also a global parameter ExtraTrackedRowsLimit that limits the
+# number of possible rows an ExtraSection can report. This parameter is
+# here to protect too much memory use when you make a bad setup in your
+# ExtraSection. It applies to all ExtraSection independently meaning that
+# none ExtraSection can report more rows than value defined by ExtraTrackedRowsLimit.
+# If you know an ExtraSection will report more rows than its value, you should
+# increase this parameter or AWStats will stop with an error.
+# Example: 2000
+# Default: 500
+#
+ExtraTrackedRowsLimit=500
+
+
+#-----------------------------------------------------------------------------
+# INCLUDES
+#-----------------------------------------------------------------------------
+
+# You can include other config files using the directive with the name of the
+# config file.
+# This is particularly useful for users who have a lot of virtual servers, so
+# a lot of config files and want to maintain common values in only one file.
+# Note that when a variable is defined both in a config file and in an
+# included file, AWStats will use the last value read for parameters that
+# contains one value and AWStats will concat all values from both files for
+# parameters that are lists of values.
+#
+
+#Include ""
+
diff --git a/modules/awstats/manifests/init.pp b/modules/awstats/manifests/init.pp
new file mode 100644
index 0000000..309f9c6
--- /dev/null
+++ b/modules/awstats/manifests/init.pp
@@ -0,0 +1,24 @@
+class awstats::base {
+    include apache::base
+
+    package { awstats: ensure => present }
+    package { GeoIP: ensure => present }
+    package { perl-Geo-IP: ensure => present }
+
+    folder { '/var/www/html/awstats',
+        source => 'blank/',
+        owner => 'root',
+        group => 'root',
+        replace => false,
+    }
+
+    script { '/etc/cron.hourly/awstats':
+        source => 'puppet:///awstats/awstats.cron',
+    }
+
+    file { '/etc/awstats/awstats.fedoraproject.org.conf':
+        source => 'puppet:///awstats/awstats.fedoraproject.org.conf',
+    }
+
+}
+

commit 97997c0ef5b4f88aef12cb3f22762a5bcc51a5e8
Merge: c3822c1... 6094f3c...
Author: Ricky Zhou <[email-masked]>
Date:   Fri Jul 18 06:33:23 2008 +0000

    Merge branch 'master' of /git/puppet

commit c3822c128682541a6ce9a3cee695007578cedb0f
Author: Ricky Zhou <[email-masked]>
Date:   Fri Jul 18 06:33:19 2008 +0000

    Open port 80 on log1 for awstats.

diff --git a/manifests/nodes/log1.fedora.phx.redhat.com.pp b/manifests/nodes/log1.fedora.phx.redhat.com.pp
index c08d5f5..b255ab9 100644
--- a/manifests/nodes/log1.fedora.phx.redhat.com.pp
+++ b/manifests/nodes/log1.fedora.phx.redhat.com.pp
@@ -6,7 +6,7 @@ node log1{
     include phx
     include vpn
 
-    $tcpPorts = [ ]
+    $tcpPorts = [ 80 ]
     $udpPorts = [ 514 ]
     $custom = [ ]

commit 6094f3c379b935cdfa7fa54071a12e5b3ac2d855
Author: Bill Nottingham <[email-masked]>
Date:   Fri Jul 18 03:30:01 2008 +0000

    7 is dead.

diff --git a/configs/system/fedora-updates-push b/configs/system/fedora-updates-push
index a3be7cd..53bd849 100755
--- a/configs/system/fedora-updates-push
+++ b/configs/system/fedora-updates-push
@@ -3,7 +3,7 @@
 SOURCE=/mnt/koji/mash/updates
 DEST=/pub/fedora/linux/updates/
 
-for rel in 7 8 9; do 
+for rel in 8 9; do 
 
 rsync -rlptDvHh --delay-updates $RSYNC_OPTS --exclude "repodata/*" \
 	$SOURCE/f$rel-updates/ $DEST/$rel/ &>/dev/null

commit 501f73be13fce503a8bcb9a6d96ed853f5f9f55a
Author: Nigel Jones <[email-masked]>
Date:   Fri Jul 18 00:59:57 2008 +0000

    Bump check_koji boundaries while the new RPM settles in

diff --git a/configs/system/check_koji b/configs/system/check_koji
index 0234ca5..4ac1156 100755
--- a/configs/system/check_koji
+++ b/configs/system/check_koji
@@ -1,8 +1,8 @@
 #!/bin/bash
 
 CHECK='/usr/bin/wget -qO- http://publictest8.fedora.phx.redhat.com/koji/builds | /bin/grep -c failed.png'
-WARNING=15
-CRITICAL=20
+WARNING=20
+CRITICAL=25
 
 FAILURES=$(/usr/bin/wget -qO- http://publictest8.fedora.phx.redhat.com/koji/builds | /bin/grep -c failed.png)

commit 8719c3434d05f43bbc3cd704515cf98e4ab289de
Author: Mike McGrath <[email-masked]>
Date:   Fri Jul 18 00:34:43 2008 +0000

    massivly increasing this number

diff --git a/configs/web/applications/accounts.conf.erb b/configs/web/applications/accounts.conf.erb
index a4cde51..e09a496 100644
--- a/configs/web/applications/accounts.conf.erb
+++ b/configs/web/applications/accounts.conf.erb
@@ -12,7 +12,7 @@ WSGIRestrictStdout On
 WSGIRestrictSignal Off
 
 # These are the real tunables
-WSGIDaemonProcess fas processes=4 threads=2 maximum-requests=50 user=fas display-name=fas inactivity-timeout=30
+WSGIDaemonProcess fas processes=4 threads=2 maximum-requests=1000 user=fas display-name=fas inactivity-timeout=30
 WSGIPythonOptimize 2
 
 WSGIScriptAlias /accounts /etc/fas.wsgi/accounts

commit 8f27b05464b8173270fb392938bca065abd10991
Author: Ricky Zhou <[email-masked]>
Date:   Thu Jul 17 23:21:55 2008 +0000

    Bad move, Ricky.

diff --git a/configs/web/applications/mirrors.conf b/configs/web/applications/mirrors.conf
index d3216d1..63310ff 100644
--- a/configs/web/applications/mirrors.conf
+++ b/configs/web/applications/mirrors.conf
@@ -8,7 +8,7 @@ RedirectMatch permanent /mirrormanager/(.*) /$1
         ExpiresDefault "modification plus 1 hour"
 </Directory>
 
-<Location /mirrorlists>
+<Location /mirrorlist>
     SetHandler python-program
     PythonPath "sys.path + ['/srv/tg/mirrormanager/server-scripts']"
     PythonHandler mirrorlist_client

commit d94bbc17223334ed332699d1c02d4c58627d8fe8
Merge: 7e47fc6... 8e24437...
Author: Ricky Zhou <[email-masked]>
Date:   Thu Jul 17 23:17:56 2008 +0000

    Merge branch 'master' of /git/puppet

commit 7e47fc696523774fff4e2170979815fbb0e52c1c
Author: Ricky Zhou <[email-masked]>
Date:   Thu Jul 17 23:17:50 2008 +0000

    Attempt a fix.

diff --git a/configs/web/applications/mirrors.conf b/configs/web/applications/mirrors.conf
index 63310ff..d3216d1 100644
--- a/configs/web/applications/mirrors.conf
+++ b/configs/web/applications/mirrors.conf
@@ -8,7 +8,7 @@ RedirectMatch permanent /mirrormanager/(.*) /$1
         ExpiresDefault "modification plus 1 hour"
 </Directory>
 
-<Location /mirrorlist>
+<Location /mirrorlists>
     SetHandler python-program
     PythonPath "sys.path + ['/srv/tg/mirrormanager/server-scripts']"
     PythonHandler mirrorlist_client

commit 8e24437358e3e22919b97665426bb5fd00de76ad
Author: Mike McGrath <[email-masked]>
Date:   Thu Jul 17 17:52:35 2008 +0000

    disabling the automated backups for now until db3 is up.  they're causing issues

diff --git a/manifests/services/db.pp b/manifests/services/db.pp
index 0060d04..1372662 100644
--- a/manifests/services/db.pp
+++ b/manifests/services/db.pp
@@ -104,7 +104,7 @@ class postgresServer {
                     user => postgres,
                     minute => 20,
                     hour => [ 2,15 ],
-                    ensure => present,
+                    ensure => absent,
             }
     } else {
             service { postgresql:

commit 1e24ffd50bdede5c7f6ed4b5cb367cfdc99681f0
Author: Luke Macken <[email-masked]>
Date:   Thu Jul 17 17:44:47 2008 +0000

    [selinux] remove the libflashplayer.so from our restorecond.conf

diff --git a/configs/system/selinux/restorecond.conf b/configs/system/selinux/restorecond.conf
index 76bd10a..2b1d709 100644
--- a/configs/system/selinux/restorecond.conf
+++ b/configs/system/selinux/restorecond.conf
@@ -8,7 +8,6 @@
 /var/log/wtmp
 /etc/lvm/.cache
 ~/public_html
-~/.mozilla/plugins/libflashplayer.so
 /var/db/passwd.db
 /var/db/group.db
 /etc/syslog.conf

commit dfb1bb0ec35c0259767a7941082a06fa5917e130
Merge: 11b1181... 616e9b1...
Author: Luke Macken <[email-masked]>
Date:   Thu Jul 17 17:44:07 2008 +0000

    Merge branch 'master' of /git/puppet

commit 616e9b1ae635308864ba7abf1adc71ac5e97cc1c
Author: Nigel Jones <[email-masked]>
Date:   Thu Jul 17 13:17:50 2008 +0000

    Fix admin.fp.o/tickets redirect

diff --git a/configs/web/admin.fedoraproject.org/modRewrite.conf b/configs/web/admin.fedoraproject.org/modRewrite.conf
index c484f4f..931083c 100644
--- a/configs/web/admin.fedoraproject.org/modRewrite.conf
+++ b/configs/web/admin.fedoraproject.org/modRewrite.conf
@@ -1,7 +1,7 @@
 RewriteEngine on
 RewriteRule ^/$ https://%{HTTP_HOST}/wikifpo/IndexAdmin
 
-RedirectMatch /tickets.* https://hosted.fedoraproject.org/projects/fedora-infrastructure/
+RedirectMatch /tickets.* https://fedorahosted.org/fedora-infrastructure/
 
 RewriteCond %{HTTP_USER_AGENT} [email-masked].*$
 RewriteRule ^/.*$ - [F]

commit 55d3383bc3a8c481c205e8edce11513211e3cdba
Author: Nigel Jones <[email-masked]>
Date:   Thu Jul 17 05:03:33 2008 +0000

    Remove other proxy4 references

diff --git a/configs/system/nagios/hostgroups/servers.cfg b/configs/system/nagios/hostgroups/servers.cfg
index 1b715ff..8e013ba 100644
--- a/configs/system/nagios/hostgroups/servers.cfg
+++ b/configs/system/nagios/hostgroups/servers.cfg
@@ -5,5 +5,5 @@
 define hostgroup {
         hostgroup_name  servers
         alias           All Servers
-        members         app1, app2, app3, app4, app5, app6, fas1, fas2, lockbox, proxy1, proxy2, proxy3, proxy4, proxy5, puppet1, bastion, cvs-int, db1, db2, nfs1, hosted1, hosted2, collab1, koji, releng1, noc1, noc2, xen1, xen2, xen4, xen6, xen7, xen8, xen9, xen10, xen12, serverbeach1, serverbeach2, serverbeach4, serverbeach5, planet1, people1, ns1, fpserv, btserv, torrent1, bu1, secondary1, telia1, kojipkgs1, log1, releng2, asterisk1
+        members         app1, app2, app3, app4, app5, app6, fas1, fas2, lockbox, proxy1, proxy2, proxy3, proxy5, puppet1, bastion, cvs-int, db1, db2, nfs1, hosted1, hosted2, collab1, koji, releng1, noc1, noc2, xen1, xen2, xen4, xen6, xen7, xen8, xen9, xen10, xen12, serverbeach1, serverbeach2, serverbeach4, serverbeach5, planet1, people1, ns1, fpserv, btserv, torrent1, bu1, secondary1, telia1, kojipkgs1, log1, releng2, asterisk1
 }
diff --git a/configs/system/nagios/hostgroups/web.cfg b/configs/system/nagios/hostgroups/web.cfg
index 3859cae..32ddedb 100644
--- a/configs/system/nagios/hostgroups/web.cfg
+++ b/configs/system/nagios/hostgroups/web.cfg
@@ -5,5 +5,5 @@
 define hostgroup {
         hostgroup_name  webservers
         alias           webservers
-        members         app1, app2, app3, app4, app5, app6, proxy1, proxy2, proxy3, proxy4
+        members         app1, app2, app3, app4, app5, app6, proxy1, proxy2, proxy3
 }
diff --git a/configs/system/nagios/services/disk.cfg b/configs/system/nagios/services/disk.cfg
index d73fb18..7068e1f 100644
--- a/configs/system/nagios/services/disk.cfg
+++ b/configs/system/nagios/services/disk.cfg
@@ -28,7 +28,7 @@ define service {
 }
 
 define service {
-  host_name		app1, app2, app3, app4, app5, app6, bastion, cvs-int, db1, db2, lockbox, noc1, proxy1, proxy2, proxy4, releng1, xen6
+  host_name		app1, app2, app3, app4, app5, app6, bastion, cvs-int, db1, db2, lockbox, noc1, proxy1, proxy2, releng1, xen6
   service_description   Disk Space /boot
   check_command         check_by_nrpe!check_disk_/boot
   use                   disktemplate

commit 40a306e4405bdaafdd47355b2167a79584b97187
Author: Nigel Jones <[email-masked]>
Date:   Thu Jul 17 04:55:43 2008 +0000

    Setup proxy1 correctly now proxy4 has been removed, delete proxy4 from nagios

diff --git a/configs/system/nagios/hosts/proxy1-www.cfg b/configs/system/nagios/hosts/proxy1-www.cfg
index e6d50f5..e9ad8df 100644
--- a/configs/system/nagios/hosts/proxy1-www.cfg
+++ b/configs/system/nagios/hosts/proxy1-www.cfg
@@ -2,5 +2,6 @@ define host {
   host_name                    proxy1-www
   alias                        proxy1-www.fedora.phx.redhat.com
   use                          defaulttemplate
-  address                      10.8.32.121
+  address                      10.8.32.122
+  parents                      proxy1
 }
diff --git a/configs/system/nagios/hosts/proxy1.cfg b/configs/system/nagios/hosts/proxy1.cfg
index 2997861..ccc6f0a 100644
--- a/configs/system/nagios/hosts/proxy1.cfg
+++ b/configs/system/nagios/hosts/proxy1.cfg
@@ -3,4 +3,5 @@ define host {
   alias                        proxy1.fedora.phx.redhat.com
   use                          defaulttemplate
   address                      proxy1.fedora.phx.redhat.com
+  parents                      xen1
 }
diff --git a/configs/system/nagios/hosts/proxy4-www.cfg b/configs/system/nagios/hosts/proxy4-www.cfg
deleted file mode 100644
index 8baed86..0000000
--- a/configs/system/nagios/hosts/proxy4-www.cfg
+++ /dev/null
@@ -1,8 +0,0 @@
-define host {
-  host_name                    proxy4-www
-  alias                        proxy4-www.fedora.phx.redhat.com
-  use                          defaulttemplate
-  address                      10.8.32.123
-  register                     0
-# firewall problems, don't register this yet
-}
diff --git a/configs/system/nagios/hosts/proxy4.cfg b/configs/system/nagios/hosts/proxy4.cfg
deleted file mode 100644
index 5fbabdd..0000000
--- a/configs/system/nagios/hosts/proxy4.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-define host {
-  host_name                    proxy4
-  alias                        proxy4.fedora.phx.redhat.com
-  use                          defaulttemplate
-  address                      proxy4.fedora.phx.redhat.com
-  parents                      xen1
-}

commit d71e26de5858bc4b241dddcc24969f5a3e3134a8
Author: Nigel Jones <[email-masked]>
Date:   Thu Jul 17 04:49:38 2008 +0000

    And AGAIN?!?!

diff --git a/manifests/nodes/proxy1.fedora.phx.redhat.com.pp b/manifests/nodes/proxy1.fedora.phx.redhat.com.pp
index e97bb58..fa1a69c 100644
--- a/manifests/nodes/proxy1.fedora.phx.redhat.com.pp
+++ b/manifests/nodes/proxy1.fedora.phx.redhat.com.pp
@@ -24,7 +24,7 @@ node proxy1{
     }
 
     eth { 'eth0:0':
-        ipaddr => '10.8.32.122,
+        ipaddr => '10.8.32.122',
         netmask => '255.255.254.0',
     }

commit af262af491fae4b81d0f3f810557c8bf4c76d245
Author: Nigel Jones <[email-masked]>
Date:   Thu Jul 17 04:48:52 2008 +0000

    Went a little overboard then...

diff --git a/manifests/nodes/proxy1.fedora.phx.redhat.com.pp b/manifests/nodes/proxy1.fedora.phx.redhat.com.pp
index 88999ee..e97bb58 100644
--- a/manifests/nodes/proxy1.fedora.phx.redhat.com.pp
+++ b/manifests/nodes/proxy1.fedora.phx.redhat.com.pp
@@ -24,7 +24,7 @@ node proxy1{
     }
 
     eth { 'eth0:0':
-        ipaddr => '10.8.32.1222,
+        ipaddr => '10.8.32.122,
         netmask => '255.255.254.0',
     }

commit 68938f97165e7a2cbce9486ab79c6c8a716d4050
Author: Nigel Jones <[email-masked]>
Date:   Thu Jul 17 04:48:06 2008 +0000

    Update proxy1 admin.fp.o ip

diff --git a/manifests/nodes/proxy1.fedora.phx.redhat.com.pp b/manifests/nodes/proxy1.fedora.phx.redhat.com.pp
index cbe6bc2..88999ee 100644
--- a/manifests/nodes/proxy1.fedora.phx.redhat.com.pp
+++ b/manifests/nodes/proxy1.fedora.phx.redhat.com.pp
@@ -24,7 +24,7 @@ node proxy1{
     }
 
     eth { 'eth0:0':
-        ipaddr => '10.8.32.121',
+        ipaddr => '10.8.32.1222,
         netmask => '255.255.254.0',
     }

commit d217335a12c1c0e73ddfdfb6d428bb44f8802177
Merge: d904b24... cde6c7a...
Author: Nigel Jones <[email-masked]>
Date:   Thu Jul 17 02:25:00 2008 +0000

    Merge branch 'master' of /git/puppet

commit d904b246567bf874c949e64a2c9d5d111fdd3251
Author: Nigel Jones <[email-masked]>
Date:   Thu Jul 17 02:24:35 2008 +0000

    Alter mirrors.fp.o checks

diff --git a/configs/system/nagios-external/services/websites.cfg b/configs/system/nagios-external/services/websites.cfg
index a868202..58e2aec 100644
--- a/configs/system/nagios-external/services/websites.cfg
+++ b/configs/system/nagios-external/services/websites.cfg
@@ -51,13 +51,20 @@ define service {
 
 define service {
   host_name             66.35.62.162-tummy, 209.132.176.122-phx
-  service_description   mirrors.fedoraproject.org
+  service_description   mirrors.fedoraproject.org - mirrorlist
   check_command         check_website!mirrors.fedoraproject.org!/mirrorlist?repo=fedora-8&arch=i386&country=US!releases
   use                   websitetemplate
 }
 
 define service {
   host_name             66.35.62.162-tummy, 209.132.176.122-phx
+  service_description   mirrors.fedoraproject.org
+  check_command         check_website!mirrors.fedoraproject.org!/!Fedora Public Active Mirrors
+  use                   websitetemplate
+}
+
+define service {
+  host_name             66.35.62.162-tummy, 209.132.176.122-phx
   service_description   start.fedoraproject.org
   check_command         check_website!start.fedoraproject.org!/!The Fedora Project is maintained and driven by the community and sponsored by Red Hat.
   use                   websitetemplate

commit 11b118188b8abf7fe36f04259a7f2cfad60b1dc5
Author: Luke Macken <[email-masked]>
Date:   Wed Jul 16 21:11:50 2008 +0000

    [bodhi] Add an initial bodhi.wsgi application

diff --git a/configs/web/applications/bodhi.wsgi b/configs/web/applications/bodhi.wsgi
new file mode 100644
index 0000000..833c79a
--- /dev/null
+++ b/configs/web/applications/bodhi.wsgi
@@ -0,0 +1,29 @@
+import sys
+sys.stdout = sys.stderr
+import pkg_resources
+pkg_resources.require("CherryPy<3.0")
+
+import atexit
+import cherrypy
+import cherrypy._cpwsgi
+import turbogears
+
+from bodhi.util import load_config
+load_config()
+
+turbogears.config.update({'global': {'server.environment': 'production'}})
+turbogears.config.update({'global': {'autoreload.on': False}})
+turbogears.config.update({'global': {'server.log_to_screen': False}})
+turbogears.config.update({'global': {'server.webpath': '/updates'}})
+
+from bodhi import jobs
+turbogears.startup.call_on_startup.append(jobs.schedule)
+
+import bodhi.controllers
+cherrypy.root = bodhi.controllers.Root()
+
+if cherrypy.server.state == 0:
+    atexit.register(cherrypy.server.stop) 
+    cherrypy.server.start(init_only=True, server_class=None)
+
+application = cherrypy._cpwsgi.wsgiApp

commit cde6c7afb69d6282191f8b5542cbf0395e5ee295
Author: Luke Macken <[email-masked]>
Date:   Wed Jul 16 21:08:08 2008 +0000

    [bodhi] Set our security team to security_respons-members instead of secalert

diff --git a/configs/web/applications/bodhi-prod.cfg.erb b/configs/web/applications/bodhi-prod.cfg.erb
index 68a4907..b75d4b0 100644
--- a/configs/web/applications/bodhi-prod.cfg.erb
+++ b/configs/web/applications/bodhi-prod.cfg.erb
@@ -38,7 +38,7 @@ visit.cookie.secure = True
 # Our identity that we use to fetch bugzilla details and such
 bodhi_password='<%= bodhiPassword %>'
 bodhi_email = [email-masked]'
-security_team = [email-masked]'
+security_team = [email-masked]'
 release_team_address = [email-masked]'
 fedora_announce_list = [email-masked]'
 fedora_test_announce_list = [email-masked]'

commit e2360045362d6337456271a87a86d1789d89d98f
Author: Luke Macken <[email-masked]>
Date:   Wed Jul 16 21:06:13 2008 +0000

    [bodhi] Add the jsonfas identity provider and visit manager configuration

diff --git a/configs/web/applications/bodhi-prod.cfg.erb b/configs/web/applications/bodhi-prod.cfg.erb
index 7acf172..68a4907 100644
--- a/configs/web/applications/bodhi-prod.cfg.erb
+++ b/configs/web/applications/bodhi-prod.cfg.erb
@@ -26,13 +26,13 @@ base_url_filter.base_url = 'https://admin.fedoraproject.org/updates'
 
 tg.strict_parameters = True
 
-# Fedora Account System config
+# FAS2
 sqlalchemy.dburi="sqlite:///"
-identity.provider='safas'
+fas.url = 'https://admin.fedoraproject.org/accounts/'
+identity.provider='jsonfas'
 identity.saprovider.model.visit="fedora.accounts.tgfas.VisitIdentity"
-visit.manager="safas"
-visit.timeout=120
-visit.saprovider.model = "fedora.accounts.tgfas.Visit"
+visit.manager="jsonfas"
+visit.saprovider.model="fedora.accounts.tgfas.Visit"
 visit.cookie.secure = True
 
 # Our identity that we use to fetch bugzilla details and such

commit ffdaa87f886c8930940304d00be7dae5546d404a
Author: Luke Macken <[email-masked]>
Date:   Wed Jul 16 21:01:52 2008 +0000

    [bodhi] Set the thread pool and socket queue size, and disable the session filter

diff --git a/configs/web/applications/bodhi-prod.cfg.erb b/configs/web/applications/bodhi-prod.cfg.erb
index 65403df..7acf172 100644
--- a/configs/web/applications/bodhi-prod.cfg.erb
+++ b/configs/web/applications/bodhi-prod.cfg.erb
@@ -7,16 +7,19 @@
 ##
 
 sqlobject.dburi="notrans_postgres://bodhi:<%= bodhiPassword %>@db2/bodhi"
-#sqlobject.dburi="postgres://bodhi:<%= bodhiPassword %>@db2.fedora.phx.redhat.com/fedora_updates?debug=True&debugOutput=True"
 
 server.socket_port=8084
 server.environment="production"
 server.webpath="/updates"
 server.log_file = "server.log"
 server.log_to_screen = False
+server.thread_pool = 50
+server.socket_queue_size = 30
 
-session_filter.on = True
+# We probably want to have apache do this for us...
 gzipFilter.on = True
+
+session_filter.on = False
 base_url_filter.on = True
 base_url_filter.use_x_forwarded_host = True
 base_url_filter.base_url = 'https://admin.fedoraproject.org/updates'

commit 79a82ceccfe45270bae5c0339da09ea21b379f6e
Author: Mike McGrath <[email-masked]>
Date:   Wed Jul 16 20:47:14 2008 +0000

    4 minute timeout

diff --git a/configs/web/httpd.conf-rhel5p b/configs/web/httpd.conf-rhel5p
index d5039b1..d38bd2b 100644
--- a/configs/web/httpd.conf-rhel5p
+++ b/configs/web/httpd.conf-rhel5p
@@ -74,7 +74,7 @@ PidFile run/httpd.pid
 #
 # Timeout: The number of seconds before receives and sends time out.
 #
-Timeout 120
+Timeout 240
 
 #
 # KeepAlive: Whether or not to allow persistent connections (more than

commit abaf283cb6193c7b535b015c6d260f83317374b7
Author: Mike McGrath <[email-masked]>
Date:   Wed Jul 16 20:43:34 2008 +0000

    Moving to a 4 minute timeout

diff --git a/configs/web/httpd.conf b/configs/web/httpd.conf
index 32d130c..b17414e 100644
--- a/configs/web/httpd.conf
+++ b/configs/web/httpd.conf
@@ -74,7 +74,7 @@ PidFile run/httpd.pid
 #
 # Timeout: The number of seconds before receives and sends time out.
 #
-Timeout 120
+Timeout 240
 
 #
 # KeepAlive: Whether or not to allow persistent connections (more than